Lista de obras - Sabina Gheduzzi - Dominio Público Uruguay

A Novel Modelling Methodology Which Predicts the Structural Behaviour of Vertebral Bodies under Axial Impact Loading: A Finite Element and DIC Study

artículo científico publicado en 2020

A biomechanical evaluation of hinged total knee replacement prostheses

artículo científico publicado en 2013

A comparison of the viscoelastic properties of bone grafts

artículo científico publicado en 2006

An In Vitro Biomechanical Study Comparing the Spiral Linking Technique Against the Pulvertaft Weave for Tendon Repair

artículo científico publicado en 2007

An in vitro study of ultrasound signal loss across simple fractures in cortical bone mimics and bovine cortical bone samples.

artículo científico publicado en 2006

An in-vitro investigation into the cement pressurization achieved during insertion of four different femoral stems

artículo científico publicado en 2005

An investigation into axial impacts of the cervical spine using digital image correlation.

artículo científico publicado en 2015

Clinical experience with metal-on-metal total joint replacements: indications and results.

artículo científico publicado en 2006

Dynamic, six-axis stiffness matrix characteristics of the intact intervertebral disc and a disc replacement.

artículo científico publicado en 2015

Factors affecting the mechanical and viscoelastic properties of acrylic bone cement

artículo científico publicado en 2002

Femoral cementing techniques: current trends in the UK.

artículo científico publicado en 2006

In vitro method for assessing the biomechanics of the patellofemoral joint following total knee arthroplasty

artículo científico publicado en 2014

In vitro pressurization of the acetabular cement mantle: the effect of a flange.

artículo científico publicado en 2007

Influence of setting liquid composition and liquid-to-powder ratio on properties of a Mg-substituted calcium phosphate cement

article

Locking plates increase the strength of dynamic hip screws

artículo científico publicado en 2007

Mechanical characterisation of three percutaneous vertebroplasty biomaterials

artículo científico publicado en 2006

Modelling the effects of different fracture geometries and healing stages on ultrasound signal loss across a long bone fracture.

artículo científico publicado en 2007

Morsellised sawbones is an acceptable experimental substitute for the in vitro elastic and viscoelastic mechanical characterisation of morsellised cancellous bone undergoing impaction grafting

artículo científico publicado en 2013

Musculoskeletal modelling of the human cervical spine for the investigation of injury mechanisms during axial impacts

artículo científico publicado en 2019

Numerical predictions of the thermal behaviour and resultant effects of grouting cements while setting prosthetic components in bone

artículo científico publicado en 2006

Pectoralis major tendon repair: a biomechanical study of suture button versus transosseous suture techniques

artículo científico publicado en 2014

The application of physiological loading using a dynamic, multi-axis spine simulator.

artículo científico publicado en 2016

The development of a dynamic, six-axis spine simulator

artículo científico publicado en 2013

The development of a model for in vitro testing of femoral stems in impaction bone grafting

artículo científico publicado en 2007

The dynamic, six-axis stiffness matrix testing of porcine spinal specimens.

artículo científico publicado en 2014

The equivalence of multi-axis spine systems: Recommended stiffness limits using a standardized testing protocol

artículo científico publicado en 2017

The influence of tibial component malalignment on bone strain in revision total knee replacement

artículo científico publicado en 2016

Ultrasonic propagation in cortical bone mimics.

artículo científico publicado en 2006

Ultrasound mimics the effect of mechanical loading on bone formation in vivo on rat ulnae

artículo científico publicado en 2008

Ultrasound transmission loss across transverse and oblique bone fractures: an in vitro study.

artículo científico publicado en 2007

Lista de obras de Sabina Gheduzzi

A Novel Modelling Methodology Which Predicts the Structural Behaviour of Vertebral Bodies under Axial Impact Loading: A Finite Element and DIC Study

A biomechanical evaluation of hinged total knee replacement prostheses

A comparison of the viscoelastic properties of bone grafts

An In Vitro Biomechanical Study Comparing the Spiral Linking Technique Against the Pulvertaft Weave for Tendon Repair

An in vitro study of ultrasound signal loss across simple fractures in cortical bone mimics and bovine cortical bone samples.

An in-vitro investigation into the cement pressurization achieved during insertion of four different femoral stems

An investigation into axial impacts of the cervical spine using digital image correlation.

Clinical experience with metal-on-metal total joint replacements: indications and results.

Dynamic, six-axis stiffness matrix characteristics of the intact intervertebral disc and a disc replacement.

Factors affecting the mechanical and viscoelastic properties of acrylic bone cement

Femoral cementing techniques: current trends in the UK.

In vitro method for assessing the biomechanics of the patellofemoral joint following total knee arthroplasty

In vitro pressurization of the acetabular cement mantle: the effect of a flange.

Influence of setting liquid composition and liquid-to-powder ratio on properties of a Mg-substituted calcium phosphate cement

Locking plates increase the strength of dynamic hip screws

Mechanical characterisation of three percutaneous vertebroplasty biomaterials

Modelling the effects of different fracture geometries and healing stages on ultrasound signal loss across a long bone fracture.

Morsellised sawbones is an acceptable experimental substitute for the in vitro elastic and viscoelastic mechanical characterisation of morsellised cancellous bone undergoing impaction grafting

Musculoskeletal modelling of the human cervical spine for the investigation of injury mechanisms during axial impacts

Numerical predictions of the thermal behaviour and resultant effects of grouting cements while setting prosthetic components in bone

Pectoralis major tendon repair: a biomechanical study of suture button versus transosseous suture techniques

The application of physiological loading using a dynamic, multi-axis spine simulator.

The development of a dynamic, six-axis spine simulator

The development of a model for in vitro testing of femoral stems in impaction bone grafting

The dynamic, six-axis stiffness matrix testing of porcine spinal specimens.

The equivalence of multi-axis spine systems: Recommended stiffness limits using a standardized testing protocol

The influence of tibial component malalignment on bone strain in revision total knee replacement

Ultrasonic propagation in cortical bone mimics.

Ultrasound mimics the effect of mechanical loading on bone formation in vivo on rat ulnae

Ultrasound transmission loss across transverse and oblique bone fractures: an in vitro study.