Lista de obras -

3D strain map of axially loaded mouse tibia: a numerical analysis validated by experimental measurements.

artículo científico publicado en 2009

A model for micromotion-induced fluid flow at the bone-implant interface.

artículo científico publicado en 2014

A musculoskeletal shoulder model based on pseudo-inverse and null-space optimization

artículo científico publicado en 2010

A new technique to measure micromotion distribution around a cementless femoral stem

artículo científico publicado en 2010

A patient-specific model of total knee arthroplasty to estimate patellar strain: A case study.

artículo científico publicado en 2015

A photopolymerized composite hydrogel and surgical implanting tool for a nucleus pulposus replacement

artículo científico publicado en 2016

Anti-Microbial Dendrimers against Multidrug-Resistant P. aeruginosa Enhance the Angiogenic Effect of Biological Burn-wound Bandages.

artículo científico publicado en 2016

Architecture and properties of anisotropic polymer composite scaffolds for bone tissue engineering

artículo científico publicado en 2005

Augmentation of bone defect healing using a new biocomposite scaffold: an in vivo study in sheep

artículo científico publicado en 2010

Biocompatibility of bioresorbable poly(L-lactic acid) composite scaffolds obtained by supercritical gas foaming with human fetal bone cells

artículo científico publicado en 2005

Biodegradable HEMA-based hydrogels with enhanced mechanical properties

artículo científico publicado en 2015

Biomechanical consequences of humeral component malpositioning after anatomical total shoulder arthroplasty

scientific article published on 16 October 2010

Biomechanical evaluation of intra-articular and extra-articular procedures in anterior cruciate ligament reconstruction: a finite element analysis

artículo científico publicado en 2006

Bioresorbable composites prepared by supercritical fluid foaming

artículo científico publicado en 2005

Bone regeneration and stem cells

artículo científico publicado en 2011

Calcium phosphate drug delivery system: influence of local zoledronate release on bone implant osteointegration.

artículo científico publicado en 2004

Combined effects of zoledronate and mechanical stimulation on bone adaptation in an axially loaded mouse tibia ⬇️

artículo científico publicado el 24 de septiembre de 2010

Comparison of an EMG-based and a stress-based method to predict shoulder muscle forces

artículo científico publicado en 2014

Comparison of polyethylene wear in anatomical and reversed shoulder prostheses.

artículo científico publicado en 2009

Composite Double-Network Hydrogels To Improve Adhesion on Biological Surfaces

scientific article published on 30 October 2018

Control of Dissipation Sources: A Central Aspect for Enhancing the Mechanical and Mechanobiological Performances of Hydrogels

artículo científico publicado en 2019

Controlled release from a mechanically-stimulated thermosensitive self-heating composite hydrogel

artículo científico publicado en 2013

Corrigendum: Anti-Microbial Dendrimers against Multidrug-Resistant P. aeruginosa Enhance the Angiogenic Effect of Biological Burn-wound Bandages

artículo científico publicado en 2016

Damping properties of the nucleus pulposus

artículo científico publicado en 2012

Distribution of gap and micromotion during compressive loading around a cementless femoral stem

artículo científico publicado en 2015

Does locally delivered Zoledronate influence peri-implant bone formation? - Spatio-temporal monitoring of bone remodeling in vivo

artículo científico publicado en 2014

Effect of a pathological scapular tilt after total shoulder arthroplasty.

artículo científico publicado en 2012

Effect of different Ti-6Al-4V surface treatments on osteoblasts behaviour

artículo científico publicado en 2002

Effect of micromechanical stimulations on osteoblasts: development of a device simulating the mechanical situation at the bone-implant interface

artículo científico publicado en 2003

Effect of partial-thickness tear on loading capacities of the supraspinatus tendon: a finite element analysis.

artículo científico publicado en 2015

Effect of temporal onsets of mechanical loading on bone formation inside a tissue engineering scaffold combined with cell therapy.

artículo científico publicado en 2018

Efficient decellularization of equine tendon with preserved biomechanical properties and cytocompatibility for human tendon surgery indications

artículo científico publicado en 2019

Experimental and mathematical methods for representing relative surface elongation of the ACL.

artículo científico publicado en 1995

Fetal bone cells for tissue engineering

artículo científico publicado en 2004

Gene expression analysis of osteoblastic cells contacted by orthopedic implant particles.

artículo científico publicado en 2002

How plate positioning impacts the biomechanics of the open wedge tibial osteotomy; a finite element analysis

artículo científico publicado en 2005

Human fetal bone cells associated with ceramic reinforced PLA scaffolds for tissue engineering

artículo científico publicado en 2007

Human fetal bone cells in delivery systems for bone engineering

scientific article published on 10 January 2011

Human muscular fetal cells: a potential cell source for muscular therapies

artículo científico publicado en 2008

Hybrid granular hydrogels: combining composites and microgels for extended ranges of material properties

scientific article published on 02 April 2020

Impact of partial-thickness tears on supraspinatus tendon strain based on a finite element analysis

artículo científico publicado en 2014

Impact of synovial fluid flow on temperature regulation in knee cartilage

artículo científico publicado en 2014

Importance of polyethylene thickness in total shoulder arthroplasty: a finite element analysis

artículo científico publicado en 2012

Improving hydrogels' toughness by increasing the dissipative properties of their network

scientific article published on 22 October 2014

In vitro and in vivo investigation of bisphosphonate-loaded hydroxyapatite particles for peri-implant bone augmentation

artículo científico publicado en 2015

In vitro characterization of immune-related properties of human fetal bone cells for potential tissue engineering applications

artículo científico publicado en 2009

In vivo assessment of local effects after application of bone screws delivering bisphosphonates into a compromised cancellous bone site

artículo científico publicado en 2011

In vivo loading increases mechanical properties of scaffold by affecting bone formation and bone resorption rates

scientific article published on 18 September 2011

Injectable calcium phosphate cement for augmentation around cancellous bone screws. In vivo biomechanical studies

artículo científico publicado en 2012

Integration of mechanotransduction concepts in bone tissue engineering.

artículo científico publicado en 2013

Intrinsic viscoelasticity increases temperature in knee cartilage under physiological loading.

artículo científico publicado en 2013

Isolation and in vitro chondrogenic potential of human foetal spine cells

artículo científico publicado en 2008

Large-scale gene expression analysis of osteoblasts cultured on three different Ti-6Al-4V surface treatments

scientific article published on 01 November 2002

Light-Activated, Bioadhesive, Poly(2-hydroxyethyl methacrylate) Brush Coatings

artículo científico publicado en 2019

Local delivery of bisphosphonate from coated orthopedic implants increases implants mechanical stability in osteoporotic rats.

artículo científico publicado en 2006

Mechanical interaction between cells and fluid for bone tissue engineering scaffold: modulation of the interfacial shear stress

artículo científico publicado en 2009

Microstimulation at the bone-implant interface upregulates osteoclast activation pathways

artículo científico publicado en 2007

Miniature probe for the delivery and monitoring of a photopolymerizable material

artículo científico publicado en 2015

Nanofibrillated cellulose composite hydrogel for the replacement of the nucleus pulposus ⬇️

artículo científico publicado el 27 de mayo de 2011

Non-setting, injectable biomaterials containing particulate hydroxyapatite can increase primary stability of bone screws in cancellous bone

scientific article published on 23 September 2018

Novel micropatterns mechanically control fibrotic reactions at the surface of silicone implants.

artículo científico publicado en 2015

On the independence of time and strain effects in the stress relaxation of ligaments and tendons

artículo científico publicado en 2000

Patellar bone strain after total knee arthroplasty is correlated with bone mineral density and body mass index

scientific article published on 09 April 2019

Peri-implant bone remodeling after total hip replacement combined with systemic alendronate treatment: a finite element analysis.

artículo científico publicado en 2004

Photopolymerizable hydrogels for implants: Monte-Carlo modeling and experimental in vitro validation.

artículo científico publicado en 2014

Plasticity of fetal cartilaginous cells

scientific article published on 04 May 2010

Polylactic acid-phosphate glass composite foams as scaffolds for bone tissue engineering

artículo científico publicado en 2007

Prediction of spatio-temporal bone formation in scaffold by diffusion equation

artículo científico publicado en 2011

Repair of critical size defects in the rat cranium using ceramic-reinforced PLA scaffolds obtained by supercritical gas foaming

artículo científico publicado en 2007

Response to letter to the editor: comment on "injectable calcium phosphate cement for augmentation around cancellous bone screws. In vivo biomechanical studies" (volume 45, issue 7, pages 1156-1160)

artículo científico publicado en 2012

Simultaneous and multisite measure of micromotion, subsidence and gap to evaluate femoral stem stability

artículo científico publicado en 2012

Strain rate effect on the mechanical behavior of the anterior cruciate ligament-bone complex

scientific article published on 01 March 1999

Strategies for improving the repair of focal cartilage defects.

artículo científico

Surgical preparation of bone-scaffold interface is critical for bone regeneration inside tissue engineering scaffold

scientific article published on 19 November 2010

Targeted mechanical properties for optimal fluid motion inside artificial bone substitutes

scientific article published on 01 August 2009

The influence of wear particles in the expression of osteoclastogenesis factors by osteoblasts

artículo científico publicado en 2004

The role of energy dissipation of polymeric scaffolds in the mechanobiological modulation of chondrogenic expression.

artículo científico publicado en 2013

Tightening force and torque of nonlocking screws in a reverse shoulder prosthesis

artículo científico publicado en 2010

Time course of bone screw fixation following a local delivery of Zoledronate in a rat femoral model - a micro-finite element analysis.

artículo científico publicado en 2015

Total shoulder arthroplasty: downward inclination of the glenoid component to balance supraspinatus deficiency

artículo científico publicado en 2009

Translation of biomechanical concepts in bone tissue engineering: from animal study to revision knee arthroplasty

artículo científico publicado en 2012

Variability of the pullout strength of cancellous bone screws with cement augmentation

artículo científico publicado en 2015

Viscoelastic constitutive law in large deformations: application to human knee ligaments and tendons

artículo científico publicado en 1998

Whole-cell bioprocessing of human fetal cells for tissue engineering of skin

artículo científico publicado en 2009

Wound-healing gene family expression differences between fetal and foreskin cells used for bioengineered skin substitutes.

artículo científico publicado en 2008

Zone-dependent mechanical properties of human articular cartilage obtained by indentation measurements

artículo científico publicado en 2018

Lista de obras de

3D strain map of axially loaded mouse tibia: a numerical analysis validated by experimental measurements.

A model for micromotion-induced fluid flow at the bone-implant interface.

A musculoskeletal shoulder model based on pseudo-inverse and null-space optimization

A new technique to measure micromotion distribution around a cementless femoral stem

A patient-specific model of total knee arthroplasty to estimate patellar strain: A case study.

A photopolymerized composite hydrogel and surgical implanting tool for a nucleus pulposus replacement

Anti-Microbial Dendrimers against Multidrug-Resistant P. aeruginosa Enhance the Angiogenic Effect of Biological Burn-wound Bandages.

Architecture and properties of anisotropic polymer composite scaffolds for bone tissue engineering

Augmentation of bone defect healing using a new biocomposite scaffold: an in vivo study in sheep

Biocompatibility of bioresorbable poly(L-lactic acid) composite scaffolds obtained by supercritical gas foaming with human fetal bone cells

Biodegradable HEMA-based hydrogels with enhanced mechanical properties

Biomechanical consequences of humeral component malpositioning after anatomical total shoulder arthroplasty

Biomechanical evaluation of intra-articular and extra-articular procedures in anterior cruciate ligament reconstruction: a finite element analysis

Bioresorbable composites prepared by supercritical fluid foaming

Bone regeneration and stem cells

Calcium phosphate drug delivery system: influence of local zoledronate release on bone implant osteointegration.

Combined effects of zoledronate and mechanical stimulation on bone adaptation in an axially loaded mouse tibia ⬇️

Comparison of an EMG-based and a stress-based method to predict shoulder muscle forces

Comparison of polyethylene wear in anatomical and reversed shoulder prostheses.

Composite Double-Network Hydrogels To Improve Adhesion on Biological Surfaces

Control of Dissipation Sources: A Central Aspect for Enhancing the Mechanical and Mechanobiological Performances of Hydrogels

Controlled release from a mechanically-stimulated thermosensitive self-heating composite hydrogel

Corrigendum: Anti-Microbial Dendrimers against Multidrug-Resistant P. aeruginosa Enhance the Angiogenic Effect of Biological Burn-wound Bandages

Damping properties of the nucleus pulposus

Distribution of gap and micromotion during compressive loading around a cementless femoral stem

Does locally delivered Zoledronate influence peri-implant bone formation? - Spatio-temporal monitoring of bone remodeling in vivo

Effect of a pathological scapular tilt after total shoulder arthroplasty.

Effect of different Ti-6Al-4V surface treatments on osteoblasts behaviour

Effect of micromechanical stimulations on osteoblasts: development of a device simulating the mechanical situation at the bone-implant interface

Effect of partial-thickness tear on loading capacities of the supraspinatus tendon: a finite element analysis.

Effect of temporal onsets of mechanical loading on bone formation inside a tissue engineering scaffold combined with cell therapy.

Efficient decellularization of equine tendon with preserved biomechanical properties and cytocompatibility for human tendon surgery indications

Experimental and mathematical methods for representing relative surface elongation of the ACL.

Fetal bone cells for tissue engineering

Gene expression analysis of osteoblastic cells contacted by orthopedic implant particles.

How plate positioning impacts the biomechanics of the open wedge tibial osteotomy; a finite element analysis

Human fetal bone cells associated with ceramic reinforced PLA scaffolds for tissue engineering

Human fetal bone cells in delivery systems for bone engineering

Human muscular fetal cells: a potential cell source for muscular therapies

Hybrid granular hydrogels: combining composites and microgels for extended ranges of material properties

Impact of partial-thickness tears on supraspinatus tendon strain based on a finite element analysis

Impact of synovial fluid flow on temperature regulation in knee cartilage

Importance of polyethylene thickness in total shoulder arthroplasty: a finite element analysis

Improving hydrogels' toughness by increasing the dissipative properties of their network

In vitro and in vivo investigation of bisphosphonate-loaded hydroxyapatite particles for peri-implant bone augmentation

In vitro characterization of immune-related properties of human fetal bone cells for potential tissue engineering applications

In vivo assessment of local effects after application of bone screws delivering bisphosphonates into a compromised cancellous bone site

In vivo loading increases mechanical properties of scaffold by affecting bone formation and bone resorption rates

Injectable calcium phosphate cement for augmentation around cancellous bone screws. In vivo biomechanical studies

Integration of mechanotransduction concepts in bone tissue engineering.

Intrinsic viscoelasticity increases temperature in knee cartilage under physiological loading.

Isolation and in vitro chondrogenic potential of human foetal spine cells

Large-scale gene expression analysis of osteoblasts cultured on three different Ti-6Al-4V surface treatments

Light-Activated, Bioadhesive, Poly(2-hydroxyethyl methacrylate) Brush Coatings

Local delivery of bisphosphonate from coated orthopedic implants increases implants mechanical stability in osteoporotic rats.

Mechanical interaction between cells and fluid for bone tissue engineering scaffold: modulation of the interfacial shear stress

Microstimulation at the bone-implant interface upregulates osteoclast activation pathways

Miniature probe for the delivery and monitoring of a photopolymerizable material

Nanofibrillated cellulose composite hydrogel for the replacement of the nucleus pulposus ⬇️

Non-setting, injectable biomaterials containing particulate hydroxyapatite can increase primary stability of bone screws in cancellous bone

Novel micropatterns mechanically control fibrotic reactions at the surface of silicone implants.

On the independence of time and strain effects in the stress relaxation of ligaments and tendons

Patellar bone strain after total knee arthroplasty is correlated with bone mineral density and body mass index

Peri-implant bone remodeling after total hip replacement combined with systemic alendronate treatment: a finite element analysis.

Photopolymerizable hydrogels for implants: Monte-Carlo modeling and experimental in vitro validation.

Plasticity of fetal cartilaginous cells

Polylactic acid-phosphate glass composite foams as scaffolds for bone tissue engineering

Prediction of spatio-temporal bone formation in scaffold by diffusion equation

Repair of critical size defects in the rat cranium using ceramic-reinforced PLA scaffolds obtained by supercritical gas foaming

Response to letter to the editor: comment on "injectable calcium phosphate cement for augmentation around cancellous bone screws. In vivo biomechanical studies" (volume 45, issue 7, pages 1156-1160)

Simultaneous and multisite measure of micromotion, subsidence and gap to evaluate femoral stem stability

Strain rate effect on the mechanical behavior of the anterior cruciate ligament-bone complex

Strategies for improving the repair of focal cartilage defects.

Surgical preparation of bone-scaffold interface is critical for bone regeneration inside tissue engineering scaffold

Targeted mechanical properties for optimal fluid motion inside artificial bone substitutes

The influence of wear particles in the expression of osteoclastogenesis factors by osteoblasts

The role of energy dissipation of polymeric scaffolds in the mechanobiological modulation of chondrogenic expression.

Tightening force and torque of nonlocking screws in a reverse shoulder prosthesis

Time course of bone screw fixation following a local delivery of Zoledronate in a rat femoral model - a micro-finite element analysis.