A Sustainable Approach for the Geopolymerization of Natural Iron-Rich Aluminosilicate Materials

A lifetime prediction method based on Cumulative Flaw Length Theory

A polymer supported palladium(II) β-ketoesterate complex as active and recyclable pre-catalyst for selective reduction of quinolines in water with sodium borohydride

scholarly article by Maria Michela Dell’Anna et al published June 2015 in Journal of Molecular Catalysis A

A review on combustion synthesis intensification by means of microwave energy

article

A statistical approach for the assessment of reliability in ceramic materials from ultrasonic velocity measurement: Cumulative Flaw Length Theory

article published in 2009

Addition of WEEE Glass to Metakaolin-Based Geopolymeric Binder: A Cytotoxicity Study

article

Advancing the Use of Secondary Inputs in Geopolymer Binders for Sustainable Cementitious Composites: A Review

article

Alkali Activation of Metallurgical Slags: Reactivity, Chemical Behavior, and Environmental Assessment

Alkali activation as new option for gold mine tailings inertization

Alkali activation processes for incinerator residues management.

artículo científico publicado en 2013

Alkali-ions diffusion, mullite formation, and crystals dissolution during sintering of porcelain bodies: Microstructural approach

Anodic aqueous electrophoretic deposition of titanium dioxide using carboxylic acids as dispersing agents

scholarly article by Dorian Hanaor et al published June 2011 in Journal of the European Ceramic Society

Assessment of viscoelastic crack bridging toughening in refractory materials

article published in 2008

Binder Chemistry – Low-Calcium Alkali-Activated Materials

Bulk composition and microstructure dependence of effective thermal conductivity of porous inorganic polymer cements

article

Calibration and Use of the Heating Microscope for Indirect Evaluation of the Viscosity and Meltability of Archeological Glasses

scholarly article by Francesco Montanari published in August 2013

Characterisation of porcelain compositions using two china clays from Cameroon

article

Chemical stability of geopolymers containing municipal solid waste incinerator fly ash.

artículo científico publicado en 2009

Chromium liquid waste inertization in an inorganic alkali activated matrix: leaching and NMR multinuclear approach

artículo científico publicado en 2015

Cleaner production of the lightweight insulating composites: Microstructure, pore network and thermal conductivity

Cold-setting refractory composites from cordierite and mullite–cordierite design with geopolymer paste as binder: Thermal behavior and phase evolution

Colouring inorganic oxides in MgOCaOAl2O3SiO2 glass-ceramic systems

Combination of electrophoretic deposition and microwave-ignited combustion synthesis for the preparation of ceramic coated intermetallic-based materials

Comparison of metakaolin-based geopolymer cements from commercial sodium waterglass and sodium waterglass from rice husk ash

article published in 2016

Correlation between microstructural evolution and mechanical properties ofα-quartz and alumina reinforced K-geopolymers during high temperature treatments

Crystallization of aragonite particles from solution under microwave irradiation

Crystallization of some modified fluor-miserite Kx(Ca,Ce)5−xSi8O22F2 glasses

Cumulative pore volume, pore size distribution and phases percolation in porous inorganic polymer composites: Relation microstructure and effective thermal conductivity

Descriptive microstructure and fracture surface observations of fired volcanic ash

Design of Inorganic Polymer Mortar from Ferricalsialic and Calsialic Slags for Indoor Humidity Control

artículo científico publicado en 2016

Design of ceramic filters using Clay/Sawdust composites: Effect of pore network on the hydraulic permeability

Design of inorganic polymer cements: Effects of matrix strengthening on microstructure

Determination of thermal shock resistance in refractory materials by ultrasonic pulse velocity measurement

Development of Geopolymer Mortar from Metakaolin Blended with Agricultural and Industrial Wastes

article

Development of Thai Lignite Fly Ash and Metakaolin for Pervious Geopolymer Concrete

article by Sarochapat Sutikulsombat et al published April 2018 in Key Engineering Materials

Development of microwave-assisted sintering of Portland cement raw meal

Dispersing hydrophilic nanoparticles in hydrophobic polymers: HDPE/ZnO nanocomposites by a novel template-based approach

Early evidences of vitreous materials in Roman mosaics from Italy: An archaeological and archaeometric integrated study

article

Ecosustainable Development of Novel Bio-inorganic Hybrid Materials as UV Protection Systems for Potential Cosmetic Applications

artículo científico publicado en 2015

Effect of Pressure on Synthesis of Pr-Doped Zirconia Powders Produced by Microwave-Driven Hydrothermal Reaction

Effect of Thai Kaolin on properties of agricultural ash blended geopolymers

Effect of low-temperature high-pressure sintering on BiFeO3density, electrical magnetic and structural properties

Effect of the Introduction of Reactive Fillers and Metakaolin in Waste Clay-Based Materials for Geopolymerization Processes

Efficient Addition of Waste Glass in MK-Based Geopolymers: Microstructure, Antibacterial and Cytotoxicity Investigation

Electrochemical impedance spectroscopy: A deeper and quantitative insight into the fingermarks physical modifications over time.

artículo científico publicado en 2017

Electrophoretic deposition of multiferroic BiFeO3 sub-micrometric particles from stabilized suspensions

Enhanced reactive NiAl coatings by microwave‐assisted SHS

article published in 2008

Enhanced thermal stability in K2O-metakaolin-based geopolymer concretes by Al2O3 and SiO2 fillers addition

article

Enhancing the mechanical properties of porcelain stoneware tiles

article published in 2001

FT-IR Characterization of Antimicrobial Hybrid Materials through Sol-Gel Synthesis

Forming Silver Conductive Thick Films by Microwave Heating

Geopolymer binders from metakaolin using sodium waterglass from waste glass and rice husk ash as alternative activators: A comparative study

Geopolymerization as Cold-Consolidation Techniques for Hazardous and Non-Hazardous Wastes

article published in 2017

Geopolymers: An option for the valorization of incinerator bottom ash derived “end of waste”

Geopolymers: a new and smart way for a sustainable development

article

Glass-working evidences at Dürres, Albania: An archaeological and archaeometric study

scholarly article by Cristina Boschetti published in December 2008

Green Deep Eutectic Solvents for Microwave-Assisted Biomass Delignification and Valorisation

Highly Homogeneous Al2O3-ZrO2Nanopowder via Microwave-Assisted Hydro- and SolvoThermal Synthesis

article

Improvement of the surface properties of polycarbonate by organic–inorganic hybrid coatings

article

Incinerator Bottom Ash and Ladle Slag for Geopolymers Preparation

article published in 2014

Influence of fine aggregates on the microstructure, porosity and chemico-mechanical stability of inorganic polymer concretes

Influence of some transition metal cations on the properties of BaO-containing glasses and glass-ceramics

Influence of the drying treatment on the performance of V–Nb mixed oxides catalysts synthesised via sol–gel

article

Influence of the molar concentration of phosphoric acid solution on the properties of metakaolin-phosphate-based geopolymer cements

Inorganic polymers from alkali activation of metakaolin: Effect of setting and curing on structure

Investigation of the relationship between the condensed structure and the chemically bonded water content in the poly(sialate-siloxo) network

Li2OSiO2Al2O3MeIIO Glass-Ceramic Systems for Tile Glaze Applications

Mechanical and dynamic-mechanical behavior and morphology of polystyrene/perovskite composites: Effects of filler size

Mechanical strength and microstructure of metakaolin/volcanic ash-based geopolymer composites reinforced with reactive silica from rice husk ash (RHA)

Metakaolin-Based Porous Geopolymer with Aluminium Powder

Metakaolin-based inorganic polymer composite: Effects of fine aggregate composition and structure on porosity evolution, microstructure and mechanical properties

article

Microstructural investigations in cordierite–mullite refractories

Microstructural study of microwave sintered zirconia for dental applications

Microstuctural evolution during thermal treatment of three kaolinitic clays from Cameroon

article

Microwave Ignited Combustion Synthesis as a Joining Technique for Dissimilar Materials

Microwave Processing of Ceramic and Ceramic Matrix Composites

Microwave Selective Thermal Development of Latent Fingerprints on Porous Surfaces: Potentialities of the Method and Preliminary Experimental Results ⬇️

artículo científico publicado el 18 de julio de 2013

Microwave and ultrasonic processing: Now a realistic option for industry

Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: Experimental and numerical simulation results

Microwave assisted sintering of green metal parts

Microwave assisted synthesis of Si-modified Mn25FexNi25Cu(50−x) high entropy alloys

article published in 2016

Microwave energy application to combustion synthesis: A comprehensive review of recent advancements and most promising perspectives

article

Microwave ignited combustion synthesis as a joining technique for dissimilar materials: Modeling and experimental results

Microwave ignition of the combustion synthesis of aluminides and field-related effects

Microwave processing of glass matrix composites containing controlled isolated porosity

Microwave processing of high entropy alloys: A powder metallurgy approach

Microwave technique applied to the hydrothermal synthesis and sintering of calcia stabilized zirconia nanoparticles

Microwave thermal inertisation of asbestos containing waste and its recycling in traditional ceramics.

artículo científico publicado en 2006

Microwave-Assisted Hydrothermal Synthesis as a Rapid Route Towards Manganite Preparation

Microwave-Hydrothermal Synthesis and Hyperfine Characterization of Praseodymium-Doped Nanometric Zirconia Powders

scholarly article by Federica Bondioli et al published March 2005 in Journal of the American Ceramic Society

Microwave-assisted preparation of sodium-silicate solutions from perlite

Microwaves-Mediated Preparation of Organoclays as Organic-/Bio-Inorganic Hybrid Materials

article

Mix-design and characterization of alkali activated materials based on metakaolin and ladle slag

article

Moisture Control Capacity of Geopolymer Composites: Correlation of the Bulk Composition–Pore Network with the Absorption–Desorption Behavior

article

Morphological characterization of poly(phenylacetylene) nanospheres prepared by homogeneous and heterogeneous catalysis

Mosaic tesserae from Italy and the production of Mediterranean coloured glass (4rd century BCE–4th century CE). Part I: Chemical composition and technology

article

New "green" approaches to the synthesis of pyrazole derivatives

artículo científico publicado en 2007

New ceramic materials from MSWI bottom ash obtained by an innovative microwave-assisted sintering process

Ni–Al–Ti coatings obtained by microwave assisted combustion synthesis

Non-contact dilatometry of hard and soft porcelain compositions

article

Nonconventional Synthesis of Praseodymium-Doped Ceria by Flux Method

scholarly article by Federica Bondioli et al published February 2000 in Chemistry of Materials

Numerical models for thermal residual stresses in Al2O3 platelets/borosilicate glass matrix composites

On the versatility and distinctiveness in the use of microwave energy for the ignition of low exothermic Ni–Ti intermetallics combustion synthesis

One-pot synthesis of aniline derivatives from nitroarenes under mild conditions promoted by a recyclable polymer-supported palladium catalyst

Optimization of BFO microwave-hydrothermal synthesis: Influence of process parameters

Pair distribution function analysis and Mössbauer study of defects in microwave-hydrothermal LiFePO4

scholarly article in RSC Advances, vol. 2 no. 1, 2012

Particles size and distribution on the improvement of the mechanical performance of high strength solid solution based inorganic polymer composites: A microstructural approach

Phytochemical compounds or their synthetic counterparts? A detailed comparison of the quantitative environmental assessment for the synthesis and extraction of curcumin

Polymer supported Nickel nanoparticles as recyclable catalyst for the reduction of nitroarenes to anilines in aqueous medium

scholarly article published February 2018

Polymer supported palladium nanocrystals as efficient and recyclable catalyst for the reduction of nitroarenes to anilines under mild conditions in water

article

Porcelain stoneware with pegmatite and nepheline syenite solid solutions: Pore size distribution and descriptive microstructure

Potassium alkali concentration and heat treatment affected metakaolin-based geopolymer

Prediction of Service Life of Cordierite-Mullite Refractory Materials by Non-Destructive Methods

Preliminary Thermal Investigations of Calcium Antimonate Opacified White Glass Tesserae

article by Cristina Boschetti et al published 26 June 2020 in Heritage

Preparation of Nd:YAG Nanopowder in a Confined Environment

artículo científico publicado en 2007

Prismatic applicator for continuous microwave-assisted synthesis of metallic nanoparticles

Process Intensification by Experimental Design Application to Microwave-Assisted Extraction of Phenolic Compounds from Juglans regia L

Processing Fly Ash from Coal Burning Power Station in a Variable Radiofrequency Field

scholarly article published 21 September 2009

Production of Cement Blocks and New Ceramic Materials with High Content of Glass Waste

article

RETRACTED: Dynamic-Mechanical Behavior and Morphology of Polystyrene/Perovskite Composites: Effects of Filler Size

retracted paper

Reaction sintering and microstructural evolution in metakaolin-metastable alumina composites

article published in 2014

Recycled natural wastes in metakaolin based porous geopolymers for insulating applications

Recycling of Waste Corundum Abrasive Powder in MK-Based Geopolymers

artículo científico publicado en 2022

Recycling of industrial wastes in ceramic manufacturing: State of art and glass case studies

article

Recycling of microwave inertised asbestos containing waste in refractory materials

Resin-Immobilized Palladium Nanoparticle Catalysts for Organic Reactions in Aqueous Media: Morphological Aspects.

artículo científico publicado en 2015

Rheology of geopolymer by DOE approach

Rheology parameters of alkali-activated geopolymeric concrete binders

Role of ɣ-Al2O3 on the mechanical and microstructural properties of metakaolin-based geopolymer cements

Self-compacting geopolymer concretes: Effects of addition of aluminosilicate-rich fines

article

Service life prediction for refractory materials

Single step combustion synthesis of β-NiAl-coated γ-TiAl by microwave ignition and subsequent annealing

article by Roberto Rosa et al published October 2013 in Surface & Coatings Technology

Sintering behaviors of two porcelainized stoneware compositions using pegmatite and nepheline syenite minerals

article

Sintering behaviour of tape-cast CMAS glass-ceramic reinforced with alumina chopped fibres

Sintering behaviour, microstructure and mechanical properties of low quartz content vitrified ceramics using volcanic ash

Solution combustion synthesis of La1−xSrxFe1−yCuyO3±w (x=0, 0.2; y=0, 0.2) perovskite nanoparticles: Conventional vs. microwaves ignition

Special Issue AMPERE 15-Foreword

Stabilization and thermal conductivity of aqueous magnetite nanofluid from continuous flows hydrothermal microwave synthesis

Stabilization of bismuth ferrite suspensions in aqueous medium with sodium polyacrylate characterized by different molecular weights

Structural Characterization of Zirconia Nanoparticles Prepared by Microwave-Hydrothermal Synthesis

Study of barium feldspar polymorphism as a function of temperature and calcium content

scholarly article by Luisa Barbieri et al published 1995 in Journal of Materials Science

Substitution of sodium silicate with rice husk ash-NaOH solution in metakaolin based geopolymer cement concerning reduction in global warming

article

Suzuki–Miyaura coupling under air in water promoted by polymer supported palladium nanoparticles

scholarly article by Maria Michela Dell’Anna et al published January 2013 in Journal of Molecular Catalysis A

Synthesis and characterization of cerium-doped glasses and in vitro evaluation of bioactivity

scholarly article by Cristina Leonelli et al published February 2003 in Journal of Non-Crystalline Solids

Synthesis of Zirconia Nanoparticles in a Continuous-Flow Microwave Reactor

Synthesis of silica nanoparticles in a continuous-flow microwave reactor

article published in 2006

The Anorthite-Diopside System: Structural and Devitrification Study. Part II: Crystallinity Analysis by the Rietveld-RIR Method

The Liquidus Temperature of Nuclear Waste Glasses: An International Round-Robin Study

The corrosion of kaolinite by iron minerals and the effects on geopolymerization

The design and optimization of a new microwave plasma source by numerical simulation

article published in 2007

The effects of carboxylic acids on the aqueous dispersion and electrophoretic deposition of ZrO2

The effects of firing conditions on the properties of electrophoretically deposited titanium dioxide films on graphite substrates

scholarly article by Dorian Hanaor et al published December 2011 in Journal of the European Ceramic Society

The effects of synthesized calcium phosphate compounds on the mechanical and microstructural properties of metakaolin-based geopolymer cements

The influence of gibbsite in kaolin and the formation of berlinite on the properties of metakaolin-phosphate-based geopolymer cements

The microstructure and mechanical properties of sintered celsian and strontium-celsian glass-ceramics

The pO-Index andRRatio Gap Methods for the Assessment of Corrosion Risk in Refractory Materials in Contact with Glass Melts

The role of kyanite in the improvement in the crystallization and densification of the high strength mullite matrix

Thermal Behavior of Metakaolin-Based Geopolymer Cements Using Sodium Waterglass from Rice Husk Ash and Waste Glass as Alternative Activators

Thermal Shock Resistance of Cordierite-Mullite Refractory Composites

Thermal shock behaviour of mullite–cordierite refractory materials

Transformation of the geopolymer gels to crystalline bonds in cold-setting refractory concretes: Pore evolution, mechanical strength and microstructure

Ultrafast microwave hydrothermal synthesis and characterization of Bi1−xLaxFeO3 micronized particles

article published in 2015

Ultrafine Magnetite Nanopowder: Synthesis, Characterization, and Preliminary Use as Filler of Polymethylmethacrylate Nanocomposites

article published in 2012

Use of alkali-activated concrete binders for toxic waste immobilization

article

Use of noncontact dilatometry for the assessment of the sintering kinetics during mullitization of three kaolinitic clays from Cameroon

scholarly article by Elie Kamseu et al published 11 September 2009 in Journal of Thermal Analysis and Calorimetry

Utilization of sodium waterglass from sugar cane bagasse ash as a new alternative hardener for producing metakaolin-based geopolymer cement

scholarly article by Hervé Kouamo Tchakouté et al published May 2017 in Geochemistry

Volcanic ash as alternative raw materials for traditional vitrified ceramic products