Lista de obras - Paolo Veronesi - Dominio Público Uruguay

A review on combustion synthesis intensification by means of microwave energy

article

A statistical approach for the assessment of reliability in ceramic materials from ultrasonic velocity measurement: Cumulative Flaw Length Theory

article published in 2009

Anodic aqueous electrophoretic deposition of titanium dioxide using carboxylic acids as dispersing agents

scholarly article by Dorian Hanaor et al published June 2011 in Journal of the European Ceramic Society

Assessment of viscoelastic crack bridging toughening in refractory materials

article published in 2008

Characterisation of porcelain compositions using two china clays from Cameroon

article

Combination of electrophoretic deposition and microwave-ignited combustion synthesis for the preparation of ceramic coated intermetallic-based materials

Corrosion behavior and mechanical properties of bioactive sol-gel coatings on titanium implants.

artículo científico publicado en 2014

Determination of thermal shock resistance in refractory materials by ultrasonic pulse velocity measurement

E-LCA of Two Microwave Absorbers Obtained from Slag of Copper Primary Production

artículo científico publicado en 2017

Early evidences of vitreous materials in Roman mosaics from Italy: An archaeological and archaeometric integrated study

article

Ecosustainable Development of Novel Bio-inorganic Hybrid Materials as UV Protection Systems for Potential Cosmetic Applications

artículo científico publicado en 2015

Electrochemical impedance spectroscopy: A deeper and quantitative insight into the fingermarks physical modifications over time.

artículo científico publicado en 2017

Electrophoretic deposition of PEEK-nano alumina composite coatings on stainless steel

scholarly article by Ilaria Corni et al published February 2009 in Surface & Coatings Technology

Energy Efficiency in the Microwave-Assisted Solid-State Synthesis of Cobalt Aluminate Pigment

scholarly article by Paolo Veronesi et al published 4 July 2017 in Technologies

Enhanced reactive NiAl coatings by microwave‐assisted SHS

article published in 2008

Enhancing the scratch resistance of polycarbonate with poly(ethylene oxide)-silica hybrid coatings

Forming Silver Conductive Thick Films by Microwave Heating

Improvement of the surface properties of polycarbonate by organic–inorganic hybrid coatings

article

Influence of PCL on mechanical properties and bioactivity of ZrO2-based hybrid coatings synthesized by sol-gel dip coating technique.

artículo científico publicado en 2014

Microwave Ignited Combustion Synthesis as a Joining Technique for Dissimilar Materials

Microwave Processing of Ceramic and Ceramic Matrix Composites

Microwave Selective Thermal Development of Latent Fingerprints on Porous Surfaces: Potentialities of the Method and Preliminary Experimental Results ⬇️

artículo científico publicado el 18 de julio de 2013

Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: Experimental and numerical simulation results

Microwave assisted sintering of green metal parts

Microwave assisted synthesis of Si-modified Mn25FexNi25Cu(50−x) high entropy alloys

article published in 2016

Microwave energy application to combustion synthesis: A comprehensive review of recent advancements and most promising perspectives

article

Microwave ignited combustion synthesis as a joining technique for dissimilar materials: Modeling and experimental results

Microwave ignition of the combustion synthesis of aluminides and field-related effects

Microwave processing of high entropy alloys: A powder metallurgy approach

Microwave thermal inertisation of asbestos containing waste and its recycling in traditional ceramics.

artículo científico publicado en 2006

Morphological characterization of poly(phenylacetylene) nanospheres prepared by homogeneous and heterogeneous catalysis

New "green" approaches to the synthesis of pyrazole derivatives

artículo científico publicado en 2007

Ni–Al–Ti coatings obtained by microwave assisted SHS: Oxidation behaviour in the 750–900°C range

Ni–Al–Ti coatings obtained by microwave assisted combustion synthesis

Phytochemical compounds or their synthetic counterparts? A detailed comparison of the quantitative environmental assessment for the synthesis and extraction of curcumin

Prediction of Service Life of Cordierite-Mullite Refractory Materials by Non-Destructive Methods

Prismatic applicator for continuous microwave-assisted synthesis of metallic nanoparticles

Process Intensification by Experimental Design Application to Microwave-Assisted Extraction of Phenolic Compounds from Juglans regia L

Quality Control and Thermal Shock Damage Characterization of High-Temperature Ceramics by Ultrasonic Pulse Velocity Testing

Rapid microwave sintering of protective ZrO 2 coatings on reactive metal powder compacts

Recycling of microwave inertised asbestos containing waste in refractory materials

Service life prediction for refractory materials

Single step combustion synthesis of β-NiAl-coated γ-TiAl by microwave ignition and subsequent annealing

article by Roberto Rosa et al published October 2013 in Surface & Coatings Technology

Solution combustion synthesis of La1−xSrxFe1−yCuyO3±w (x=0, 0.2; y=0, 0.2) perovskite nanoparticles: Conventional vs. microwaves ignition

The design and optimization of a new microwave plasma source by numerical simulation

article published in 2007

The pO-Index andRRatio Gap Methods for the Assessment of Corrosion Risk in Refractory Materials in Contact with Glass Melts

Thermal shock behaviour of mullite–cordierite refractory materials

Transformation of the geopolymer gels to crystalline bonds in cold-setting refractory concretes: Pore evolution, mechanical strength and microstructure

Use of noncontact dilatometry for the assessment of the sintering kinetics during mullitization of three kaolinitic clays from Cameroon

scholarly article by Elie Kamseu et al published 11 September 2009 in Journal of Thermal Analysis and Calorimetry

Lista de obras de Paolo Veronesi

A review on combustion synthesis intensification by means of microwave energy

A statistical approach for the assessment of reliability in ceramic materials from ultrasonic velocity measurement: Cumulative Flaw Length Theory

Anodic aqueous electrophoretic deposition of titanium dioxide using carboxylic acids as dispersing agents

Assessment of viscoelastic crack bridging toughening in refractory materials

Characterisation of porcelain compositions using two china clays from Cameroon

Combination of electrophoretic deposition and microwave-ignited combustion synthesis for the preparation of ceramic coated intermetallic-based materials

Corrosion behavior and mechanical properties of bioactive sol-gel coatings on titanium implants.

Determination of thermal shock resistance in refractory materials by ultrasonic pulse velocity measurement

E-LCA of Two Microwave Absorbers Obtained from Slag of Copper Primary Production

Early evidences of vitreous materials in Roman mosaics from Italy: An archaeological and archaeometric integrated study

Ecosustainable Development of Novel Bio-inorganic Hybrid Materials as UV Protection Systems for Potential Cosmetic Applications

Electrochemical impedance spectroscopy: A deeper and quantitative insight into the fingermarks physical modifications over time.

Electrophoretic deposition of PEEK-nano alumina composite coatings on stainless steel

Energy Efficiency in the Microwave-Assisted Solid-State Synthesis of Cobalt Aluminate Pigment

Enhanced reactive NiAl coatings by microwave‐assisted SHS

Enhancing the scratch resistance of polycarbonate with poly(ethylene oxide)-silica hybrid coatings

Forming Silver Conductive Thick Films by Microwave Heating

Improvement of the surface properties of polycarbonate by organic–inorganic hybrid coatings

Influence of PCL on mechanical properties and bioactivity of ZrO2-based hybrid coatings synthesized by sol-gel dip coating technique.

Microwave Ignited Combustion Synthesis as a Joining Technique for Dissimilar Materials

Microwave Processing of Ceramic and Ceramic Matrix Composites

Microwave Selective Thermal Development of Latent Fingerprints on Porous Surfaces: Potentialities of the Method and Preliminary Experimental Results ⬇️

Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: Experimental and numerical simulation results

Microwave assisted sintering of green metal parts

Microwave assisted synthesis of Si-modified Mn25FexNi25Cu(50−x) high entropy alloys

Microwave energy application to combustion synthesis: A comprehensive review of recent advancements and most promising perspectives

Microwave ignited combustion synthesis as a joining technique for dissimilar materials: Modeling and experimental results

Microwave ignition of the combustion synthesis of aluminides and field-related effects

Microwave processing of high entropy alloys: A powder metallurgy approach

Microwave thermal inertisation of asbestos containing waste and its recycling in traditional ceramics.

Morphological characterization of poly(phenylacetylene) nanospheres prepared by homogeneous and heterogeneous catalysis

New "green" approaches to the synthesis of pyrazole derivatives

Ni–Al–Ti coatings obtained by microwave assisted SHS: Oxidation behaviour in the 750–900°C range

Ni–Al–Ti coatings obtained by microwave assisted combustion synthesis

Phytochemical compounds or their synthetic counterparts? A detailed comparison of the quantitative environmental assessment for the synthesis and extraction of curcumin

Prediction of Service Life of Cordierite-Mullite Refractory Materials by Non-Destructive Methods

Prismatic applicator for continuous microwave-assisted synthesis of metallic nanoparticles

Process Intensification by Experimental Design Application to Microwave-Assisted Extraction of Phenolic Compounds from Juglans regia L

Quality Control and Thermal Shock Damage Characterization of High-Temperature Ceramics by Ultrasonic Pulse Velocity Testing

Rapid microwave sintering of protective ZrO 2 coatings on reactive metal powder compacts

Recycling of microwave inertised asbestos containing waste in refractory materials

Service life prediction for refractory materials

Single step combustion synthesis of β-NiAl-coated γ-TiAl by microwave ignition and subsequent annealing

Solution combustion synthesis of La1−xSrxFe1−yCuyO3±w (x=0, 0.2; y=0, 0.2) perovskite nanoparticles: Conventional vs. microwaves ignition

The design and optimization of a new microwave plasma source by numerical simulation

The pO-Index andRRatio Gap Methods for the Assessment of Corrosion Risk in Refractory Materials in Contact with Glass Melts

Thermal shock behaviour of mullite–cordierite refractory materials

Transformation of the geopolymer gels to crystalline bonds in cold-setting refractory concretes: Pore evolution, mechanical strength and microstructure

Use of noncontact dilatometry for the assessment of the sintering kinetics during mullitization of three kaolinitic clays from Cameroon