Filtros de búsqueda

Lista de obras de Ricardo F. Ribeiro

A 3-year longitudinal prospective study assessing microbial profile and clinical outcomes of single-unit cement-retained implant restorations: Zirconia versus titanium abutments

artículo científico publicado en 2020

A Digital Image Correlation Analysis of Strain Generated by 3-Unit Implant-Supported Fixed Dental Prosthesis: An In Vitro Study.

artículo científico publicado en 2017

A Three-Dimensional Finite Element Analysis of the Stress Distribution Generated by Splinted and Nonsplinted Prostheses in the Rehabilitation of Various Bony Ridges with Regular or Short Morse Taper Implants

artículo científico publicado en 2017

A three-dimensional finite element analysis of the stress distribution on morse taper implants surface

artículo científico publicado en 2013

Abutment rotational freedom evaluation of external hexagon single-implant restorations after mechanical cycling.

artículo científico publicado en 2012

Abutments with reduced diameter for both cement and screw retentions: analysis of failure modes and misfit of abutment-crown-connections after cyclic loading

artículo científico publicado en 2016

An alternative section method for casting and posterior laser welding of metallic frameworks for an implant-supported prosthesis

artículo científico publicado en 2008

An in vitro study of non-axial forces upon the retention of an O-ring attachment.

artículo científico publicado en 2009

Bacterial adhesion on the titanium and zirconia abutment surfaces.

artículo científico publicado en 2013

Biomechanical behavior of titanium and zirconia frameworks for implant-supported full-arch fixed dental prosthesis

artículo científico publicado en 2017

Castability and resistance of ceramometal bonding in Ni-Cr and Ni-Cr-Be alloys

scientific article published on 01 March 2001

Clinical evaluation of interocclusal recording materials in bilateral free end cases

artículo científico publicado en 2005

Comparative study of chemical and mechanical retentive systems for bonding of indirect composite resin to commercially pure titanium

artículo científico publicado en 2008

Comparative study of circumferential clasp retention force for titanium and cobalt-chromium removable partial dentures

artículo científico publicado en 2002

Comparative study of two commercially pure titanium casting methods

artículo científico publicado en 2010

Comparison of the correlation of photoelasticity and digital imaging to characterize the load transfer of implant-supported restorations.

artículo científico publicado en 2014

Correlation between vertical misfits and stresses over implants from castable frameworks made of different alloys.

artículo científico publicado en 2014

Custom Morse taper zirconia abutments: Influence on marginal fit and torque loss before and after thermomechanical cycling

artículo científico publicado en 2017

Device for recording the path of insertion for removable partial dentures

artículo científico publicado en 2000

Digital image correlation analysis of the load transfer by implant-supported restorations.

artículo científico publicado en 2011

Digital image correlation analysis on the influence of crown material in implant-supported prostheses on bone strain distribution.

artículo científico publicado en 2012

Ear symptomatology and occlusal factors: a clinical report

artículo científico publicado en 2000

Effect of acetyl resin retentive arms on the retentive force of circumferential clasps: An in vitro study ⬇️

artículo científico publicado el 21 de noviembre de 2011

Effect of beryllium on the castability and resistance of ceramometal bonds in nickel-chromium alloys.

artículo científico publicado en 1998

Effect of cyclic loading on the vertical microgap of long-span zirconia frameworks supported by 4 or 6 implants.

artículo científico publicado en 2014

Effect of different investments and mold temperatures on titanium mechanical properties

artículo científico publicado en 2012

Effect of laser welding on the titanium ceramic tensile bond strength ⬇️

artículo científico publicado el 27 de mayo de 2011

Effect of phosphate-bonded investments on titanium reaction layer and crown fit.

artículo científico publicado en 2010

Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study.

artículo científico publicado en 2009

Effect of surface treatment on the bond strength between yttria partially stabilized zirconia ceramics and resin cement

artículo científico publicado en 2014

Effect of whitening toothpaste on titanium and titanium alloy surfaces

artículo científico publicado en 2012

Effects of chemical composition on the corrosion of dental alloys

artículo científico publicado en 2012

Effects of surface treatments on mechanical behavior of sintered and pre-sintered yttria-stabilized zirconia and reliability of crowns and abutments processed by CAD/CAM

artículo científico publicado en 2019

Endodontically treated teeth: characteristics and considerations to restore them.

artículo científico publicado en 2010

Evaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique

artículo científico publicado en 2005

Experimental titanium alloys for dental applications.

artículo científico publicado en 2014

Fabrication of an acrylic resin device used to increase the size of toothbrush handles

artículo científico publicado en 1998

Fracture Strength of Weakened Anterior Teeth Associated to Different Reconstructive Techniques.

artículo científico publicado en 2016

Fracture loads and failure modes of customized and non-customized zirconia abutments

artículo científico publicado en 2018

Genome analysis and clinical implications of the bacterial communities in early biofilm formation on dental implants restored with titanium or zirconia abutments.

artículo científico publicado en 2018

Impact of temperature and time storage on the microbial detection of oral samples by Checkerboard DNA-DNA hybridization method.

artículo científico publicado en 2013

Importance of a distal proximal contact on load transfer by implant-supported single adjacent crowns in posterior region of the mandible: a photoelastic study.

artículo científico publicado en 2013

Improvement to the marginal coping fit of commercially pure titanium cast in phosphate-bonded investment by using a simple pattern coating technique.

artículo científico publicado en 2012

In Vitro Fit and Cementation Resistance of Provisional Crowns for Single Implant-Supported Restorations

artículo científico publicado en 2015

In vitro cytotoxicity of dental alloys and cpTi obtained by casting.

artículo científico publicado en 2008

In vivo evaluation of Candida spp. adhesion on titanium or zirconia abutment surfaces.

artículo científico publicado en 2013

Influence of Cyclic Fatigue in Water on Screw Torque Loss of Long-Span One-Piece Implant-Supported Zirconia Frameworks

artículo científico publicado en 2015

Influence of Manufacturing Methods of Implant-Supported Crowns on External and Internal Marginal Fit: A Micro-CT Analysis.

artículo científico publicado en 2018

Influence of the casting processing route on the corrosion behavior of dental alloys

artículo científico publicado en 2014

Influence of the interimplant distance on crestal bone resorption and bone density: a histomorphometric study in dogs.

artículo científico publicado en 2006

Internal adaptation of cast titanium crowns.

artículo científico publicado en 2007

Internal and Marginal Fit and Fracture Strength of Narrow Diameter Dental Implant-Abutment Assembly

scientific article published on 01 March 2020

Loss of preload in screwed implant joints as a function of time and tightening/untightening sequences.

artículo científico publicado en 2014

Marginal fit and microbial leakage along the implant-abutment interface of fixed partial prostheses: An in vitro analysis using Checkerboard DNA-DNA hybridization.

artículo científico publicado en 2015

Mechanical analysis of conventional and small diameter conical implant abutments.

artículo científico publicado en 2012

Mechanical comparison of experimental conical-head abutment screws with conventional flat-head abutment screws for external-hex and internal tri-channel implant connections: an in vitro evaluation of loosening torque.

artículo científico publicado en 2013

Microbiome of titanium and zirconia dental implants abutments

artículo científico publicado en 2015

Microleakage at Different Implant-Abutment Connections Under Unloaded and Loaded Conditions

artículo científico publicado en 2017

Modified section method for laser-welding of ill-fitting cp Ti and Ni-Cr alloy one-piece cast implant-supported frameworks.

artículo científico publicado en 2010

Oral bacterial colonization on dental implants restored with titanium or zirconia abutments: 6-month follow-up

artículo científico publicado en 2018

Oral biofilm formation on the titanium and zirconia substrates

artículo científico publicado en 2012

Photoelastic Analysis of Stresses Transmitted by Universal Cast to Long Abutment on Implant-Supported Single Restorations Under Static Occlusal Loads

artículo científico publicado en 2012

Photoelastic comparison of as-cast and laser-welded implant frameworks

artículo científico publicado en 2015

Photoelastic stress analysis of different designs of cement-retained fixed partial dentures on Morse taper oral implants.

artículo científico publicado en 2011

Reliability of FEA on the Results of Mechanical Properties of Materials

artículo científico publicado en 2015

Retention and stress distribution in distal extension removable partial dentures with and without implant association

artículo científico publicado en 2013

Strain transfer behavior of different planning options for mandibular single-molar replacement.

artículo científico publicado en 2017

Stress Over Implants of One-Piece Cast Frameworks Made With Different Materials

artículo científico publicado en 2015

Surveying removable partial dentures: the importance of guiding planes and path of insertion for stability

artículo científico publicado en 1997

Tensile Strength of Resin Cements Used with Base Metals in a Simulating Passive Cementation Technique for Implant-Supported Prostheses

artículo científico publicado en 2016

Tensile bond strength of cast commercially pure titanium and cast gold-alloy posts and cores cemented with two luting agents

artículo científico publicado en 2008

Tensile bond strength of cast commercially pure titanium dowel and cores cemented with three luting agents

artículo científico publicado en 2010

The effect of coating patterns with spinel-based investment on the castability and porosity of titanium cast into three phosphate-bonded investments

artículo científico publicado en 2010

The effect of commercially pure titanium and alternative dental alloys on the marginal fit of one-piece cast implant frameworks

artículo científico publicado en 2007

The effect of mold temperature on castability of CP Ti and Ti-6Al-4V castings into phosphate bonded investment materials.

artículo científico publicado en 2006

The use of a mandibular repositioning device for obstructive sleep apnea

artículo científico publicado en 2013

Three-Dimensional Finite Element Analysis of Stress Distribution on Different Bony Ridges With Different Lengths of Morse Taper Implants and Prosthesis Dimensions

artículo científico publicado en 2012

Three-dimensional finite element analysis of endodontically treated teeth with weakened radicular walls restored with different protocols

artículo científico publicado en 2015

Torque loss of different abutment sizes before and after cyclic loading

artículo científico publicado en 2015

Torque loss under mechanical cycling of long-span zirconia and titanium-cemented and screw-retained implant-supported CAD/CAM frameworks.

artículo científico publicado en 2014

Torque removal evaluation of prosthetic screws after tightening and loosening cycles: an in vitro study.

artículo científico publicado en 2011

Validation of finite element models for strain analysis of implant-supported prostheses using digital image correlation.

artículo científico publicado en 2013

Wear resistance and compression strength of ceramics tested in fluoride environments

artículo científico publicado en 2016

Wear resistance of experimental titanium alloys for dental applications

artículo científico publicado en 2011

Dominio Público Uruguay está sostenido por:

Acerca de Dominio Público Uruguay

Ayuda