Lista de obras - Gürkan Sin - Dominio Público Uruguay

A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production Process

A biochemically structured model for ethanol fermentation by Kluyveromyces marxianus: A batch fermentation and kinetic study

artículo científico publicado en 2011

A critical comparison of systematic calibration protocols for activated sludge models: a SWOT analysis.

artículo científico publicado en 2005

A dynamic model for cellulosic biomass hydrolysis: a comprehensive analysis and validation of hydrolysis and product inhibition mechanisms

artículo científico publicado en 2014

A framework for model-based optimization of bioprocesses under uncertainty: Lignocellulosic ethanol production case

article

A generic methodology for the optimisation of sewer systems using stochastic programming and self-optimizing control

artículo científico publicado en 2015

A model-based methodology for simultaneous design and control of a bioethanol production process

A new approach for modelling simultaneous storage and growth processes for activated sludge systems under aerobic conditions.

artículo científico publicado en 2005

A new extant respirometric assay to estimate intrinsic growth parameters applied to study plasmid metabolic burden

artículo científico publicado en 2010

A novel fuzzy-logic control strategy minimizing N2O emissions

artículo científico publicado en 2017

A novel model-based control strategy for aerobic filamentous fungal fed-batch fermentation processes

artículo científico publicado en 2017

An efficient approach to automate the manual trial and error calibration of activated sludge models

artículo científico publicado en 2008

An operational protocol for facilitating start-up of single-stage autotrophic nitrogen-removing reactors based on process stoichiometry

artículo científico publicado en 2013

Application of a mechanistic model as a tool for on-line monitoring of pilot scale filamentous fungal fermentation processes-The importance of evaporation effects.

artículo científico publicado en 2016

Application of mechanistic models to fermentation and biocatalysis for next-generation processes.

artículo científico publicado en 2010

Application of the Morris method for screening the influential parameters of fuzzy controllers applied to wastewater treatment plants.

artículo científico publicado en 2011

Applying mechanistic models in bioprocess development

artículo científico

Assessing reliability of cellulose hydrolysis models to support biofuel process design—Identifiability and uncertainty analysis

article

Assessment of Full-Scale N2O Emission Characteristics and Testing of Control Concepts in an Activated Sludge Wastewater Treatment Plant with Alternating Aerobic and Anoxic Phases

artículo científico publicado en 2019

Biorefinery Sustainability Analysis

CFD predicted pH gradients in lactic acid bacteria cultivations

artículo científico publicado en 2018

Calibration of the comprehensive NDHA-N2O dynamics model for nitrifier-enriched biomass using targeted respirometric assays

artículo científico publicado en 2017

Combining multiway principal component analysis (MPCA) and clustering for efficient data mining of historical data sets of SBR processes

artículo científico publicado en 2008

Comparison of the modeling approach between membrane bioreactor and conventional activated sludge processes

artículo científico publicado en 2009

Control of a Biological Nitrogen Removal Process in an Intensified Single Reactor Configuration

Developing a framework for continuous use of models in daily management and operation of WWTPs: a life cycle approach.

artículo científico publicado en 2008

Dynamic model-based evaluation of process configurations for integrated operation of hydrolysis and co-fermentation for bioethanol production from lignocellulose ⬇️

artículo científico publicado el 17 de septiembre de 2010

Dynamic modeling and validation of a lignocellulosic enzymatic hydrolysis process--a demonstration scale study

artículo científico publicado en 2013

Estimation of environment-related properties of chemicals for design of sustainable processes: development of group-contribution+ (GC+) property models and uncertainty analysis

artículo científico publicado en 2012

Evaluation of the impacts of model-based operation of SBRs on activated sludge microbial community

Extensions to modeling aerobic carbon degradation using combined respirometric-titrimetric measurements in view of activated sludge model calibration

artículo científico publicado en 2007

Global sensitivity analysis in wastewater treatment plant model applications: prioritizing sources of uncertainty

artículo científico publicado en 2010

Good modeling practice for PAT applications: propagation of input uncertainty and sensitivity analysis.

artículo científico publicado en 2009

Group-contribution based property estimation and uncertainty analysis for flammability-related properties.

artículo científico publicado en 2016

Influence of Scaling and Unfolding in PCA Based Monitoring of Nutrient Removing Batch Process

Introducing mechanistic models in Process Analytical Technology education

artículo científico publicado en 2009

Introducing uncertainty analysis of nucleation and crystal growth models in Process Analytical Technology (PAT) system design of crystallization processes

artículo científico publicado en 2013

Mechanistic Fermentation Models for Process Design, Monitoring, and Control

artículo científico

Model-based evaluation of an on-line control strategy for SBRs based on OUR and ORP measurements.

artículo científico publicado en 2006

Model-based optimisation of the biological performance of a sidestream MBR.

artículo científico publicado en 2007

Modelling nitrite in wastewater treatment systems: a discussion of different modelling concepts.

artículo científico publicado en 2008

Modified calibration protocol evaluated in a model-based testing of SBR flexibility

artículo científico publicado en 2010

Multi-criteria evaluation of wastewater treatment plant control strategies under uncertainty.

artículo científico publicado en 2008

Multivariate Principal Component Analysis and Case-Based Reasoning for monitoring, fault detection and diagnosis in a WWTP.

artículo científico publicado en 2011

Nitrous oxide production in autotrophic nitrogen removal granular sludge: A modeling study

scientific article published on 06 February 2019

Sensitivity analysis of autotrophic N removal by a granule based bioreactor: Influence of mass transfer versus microbial kinetics

artículo científico publicado en 2012

Significance of settling model structures and parameter subsets in modelling WWTPs under wet-weather flow and filamentous bulking conditions

artículo científico publicado en 2014

Systematic design of membership functions for fuzzy-logic control: A case study on one-stage partial nitritation/anammox treatment systems.

artículo científico publicado en 2016

Systematic model development for partial nitrification of landfill leachate in a SBR.

artículo científico publicado en 2010

Transient response of aerobic and anoxic activated sludge activities to sudden substrate concentration changes

artículo científico publicado en 2004

Uncertainty analysis in WWTP model applications: a critical discussion using an example from design

artículo científico publicado en 2009

Uncertainty analysis of the CPA and a quadrupolar CPA equation of state – With emphasis on CO2

Uncertainty and sensitivity analysis of control strategies using the benchmark simulation model No1 (BSM1).

artículo científico publicado en 2009

Uncertainty estimation in deep learning‐based property models: Graph neural networks applied to the critical properties

artículo científico publicado en 2022

Use of continuous lactose fermentation for ethanol production by Kluveromyces marxianus for verification and extension of a biochemically structured model

scientific article published on 20 December 2012

Wastewater treatment modelling: dealing with uncertainties

artículo científico publicado en 2009

pH variation and influence in an autotrophic nitrogen removing biofilm system using an efficient numerical solution strategy

artículo científico publicado en 2013

Lista de obras de Gürkan Sin

A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production Process

A biochemically structured model for ethanol fermentation by Kluyveromyces marxianus: A batch fermentation and kinetic study

A critical comparison of systematic calibration protocols for activated sludge models: a SWOT analysis.

A dynamic model for cellulosic biomass hydrolysis: a comprehensive analysis and validation of hydrolysis and product inhibition mechanisms

A framework for model-based optimization of bioprocesses under uncertainty: Lignocellulosic ethanol production case

A generic methodology for the optimisation of sewer systems using stochastic programming and self-optimizing control

A model-based methodology for simultaneous design and control of a bioethanol production process

A new approach for modelling simultaneous storage and growth processes for activated sludge systems under aerobic conditions.

A new extant respirometric assay to estimate intrinsic growth parameters applied to study plasmid metabolic burden

A novel fuzzy-logic control strategy minimizing N2O emissions

A novel model-based control strategy for aerobic filamentous fungal fed-batch fermentation processes

An efficient approach to automate the manual trial and error calibration of activated sludge models

An operational protocol for facilitating start-up of single-stage autotrophic nitrogen-removing reactors based on process stoichiometry

Application of a mechanistic model as a tool for on-line monitoring of pilot scale filamentous fungal fermentation processes-The importance of evaporation effects.

Application of mechanistic models to fermentation and biocatalysis for next-generation processes.

Application of the Morris method for screening the influential parameters of fuzzy controllers applied to wastewater treatment plants.

Applying mechanistic models in bioprocess development

Assessing reliability of cellulose hydrolysis models to support biofuel process design—Identifiability and uncertainty analysis

Assessment of Full-Scale N2O Emission Characteristics and Testing of Control Concepts in an Activated Sludge Wastewater Treatment Plant with Alternating Aerobic and Anoxic Phases

Biorefinery Sustainability Analysis

CFD predicted pH gradients in lactic acid bacteria cultivations

Calibration of the comprehensive NDHA-N2O dynamics model for nitrifier-enriched biomass using targeted respirometric assays

Combining multiway principal component analysis (MPCA) and clustering for efficient data mining of historical data sets of SBR processes

Comparison of the modeling approach between membrane bioreactor and conventional activated sludge processes

Control of a Biological Nitrogen Removal Process in an Intensified Single Reactor Configuration

Developing a framework for continuous use of models in daily management and operation of WWTPs: a life cycle approach.

Dynamic model-based evaluation of process configurations for integrated operation of hydrolysis and co-fermentation for bioethanol production from lignocellulose ⬇️

Dynamic modeling and validation of a lignocellulosic enzymatic hydrolysis process--a demonstration scale study

Estimation of environment-related properties of chemicals for design of sustainable processes: development of group-contribution+ (GC+) property models and uncertainty analysis

Evaluation of the impacts of model-based operation of SBRs on activated sludge microbial community

Extensions to modeling aerobic carbon degradation using combined respirometric-titrimetric measurements in view of activated sludge model calibration

Global sensitivity analysis in wastewater treatment plant model applications: prioritizing sources of uncertainty

Good modeling practice for PAT applications: propagation of input uncertainty and sensitivity analysis.

Group-contribution based property estimation and uncertainty analysis for flammability-related properties.

Influence of Scaling and Unfolding in PCA Based Monitoring of Nutrient Removing Batch Process

Introducing mechanistic models in Process Analytical Technology education

Introducing uncertainty analysis of nucleation and crystal growth models in Process Analytical Technology (PAT) system design of crystallization processes

Mechanistic Fermentation Models for Process Design, Monitoring, and Control

Model-based evaluation of an on-line control strategy for SBRs based on OUR and ORP measurements.

Model-based optimisation of the biological performance of a sidestream MBR.

Modelling nitrite in wastewater treatment systems: a discussion of different modelling concepts.

Modified calibration protocol evaluated in a model-based testing of SBR flexibility

Multi-criteria evaluation of wastewater treatment plant control strategies under uncertainty.

Multivariate Principal Component Analysis and Case-Based Reasoning for monitoring, fault detection and diagnosis in a WWTP.

Nitrous oxide production in autotrophic nitrogen removal granular sludge: A modeling study

Sensitivity analysis of autotrophic N removal by a granule based bioreactor: Influence of mass transfer versus microbial kinetics

Significance of settling model structures and parameter subsets in modelling WWTPs under wet-weather flow and filamentous bulking conditions

Systematic design of membership functions for fuzzy-logic control: A case study on one-stage partial nitritation/anammox treatment systems.

Systematic model development for partial nitrification of landfill leachate in a SBR.

Transient response of aerobic and anoxic activated sludge activities to sudden substrate concentration changes

Uncertainty analysis in WWTP model applications: a critical discussion using an example from design

Uncertainty analysis of the CPA and a quadrupolar CPA equation of state – With emphasis on CO2

Uncertainty and sensitivity analysis of control strategies using the benchmark simulation model No1 (BSM1).

Uncertainty estimation in deep learning‐based property models: Graph neural networks applied to the critical properties

Use of continuous lactose fermentation for ethanol production by Kluveromyces marxianus for verification and extension of a biochemically structured model

Wastewater treatment modelling: dealing with uncertainties

pH variation and influence in an autotrophic nitrogen removing biofilm system using an efficient numerical solution strategy