Lista de obras - Feng Gao - Dominio Público Uruguay

14.7% Efficiency Organic Photovoltaic Cells Enabled by Active Materials with a Large Electrostatic Potential Difference

scientific article published on 03 May 2019

A dual ternary system for highly efficient ITO-free inverted polymer solar cells

A minimal non-radiative recombination loss for efficient non-fullerene all-small-molecule organic solar cells with a low energy loss of 0.54 eV and high open-circuit voltage of 1.15 V

A new tetracyclic lactam building block for thick, broad-bandgap photovoltaics.

artículo científico publicado en 2014

A piperidinium salt stabilizes efficient metal-halide perovskite solar cells

scientific article published on 01 July 2020

All-small-molecule organic solar cells with over 14% efficiency by optimizing hierarchical morphologies

scientific article published on 26 November 2019

Author Correction: Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics

artículo científico publicado en 2019

Balanced Partnership between Donor and Acceptor Components in Nonfullerene Organic Solar Cells with >12% Efficiency.

artículo científico publicado en 2018

Band structure engineering in organic semiconductors

artículo científico publicado en 2016

Barrierless Free Charge Generation in the High-Performance PM6:Y6 Bulk Heterojunction Non-Fullerene Solar Cell

artículo científico publicado en 2020

Blue perovskite light-emitting diodes: progress, challenges and future directions

artículo científico publicado en 2019

Bright Free Exciton Electroluminescence from Mn-Doped Two-Dimensional Layered Perovskites

scientific article published on 28 May 2019

Carbazole Functionalized Isocyanide Brushes in Heterojunction Photovoltaic Devices

artículo científico publicado en 2012

Colloidal metal oxide nanocrystals as charge transporting layers for solution-processed light-emitting diodes and solar cells

artículo científico publicado en 2017

Comparison of the Operation of Polymer/Fullerene, Polymer/Polymer, and Polymer/Nanocrystal Solar Cells: A Transient Photocurrent and Photovoltage Study

artículo científico publicado en 2011

Conjugated Zwitterionic Polyelectrolyte as the Charge Injection Layer for High-Performance Polymer Light-Emitting Diodes

artículo científico publicado en 2010

Control of exciton spin statistics through spin polarization in organic optoelectronic devices.

artículo científico publicado en 2012

Defect Passivation for Red Perovskite Light-Emitting Diodes with Improved Brightness and Stability

artículo científico publicado en 2019

Diffusion-Limited Crystallization: A Rationale for the Thermal Stability of Non-Fullerene Solar Cells

artículo científico publicado en 2019

Disodium edetate as a promising interfacial material for inverted organic solar cells and the device performance optimization

artículo científico publicado en 2014

Efficient Semitransparent Organic Solar Cells with Tunable Color enabled by an Ultralow-Bandgap Nonfullerene Acceptor.

artículo científico publicado en 2017

Efficient and Tunable Electroluminescence from In Situ Synthesized Perovskite Quantum Dots

scientific article published on 28 January 2019

Efficient perovskite light-emitting diodes based on a solution-processed tin dioxide electron transport layer

scientific article published on 06 June 2018

Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics

artículo científico publicado en 2019

Enhanced charge transport by incorporating additional thiophene units in the poly(fluorene-thienyl-benzothiadiazole) polymer

Extended Intermolecular Interactions Governing Photocurrent–Voltage Relations in Ternary Organic Solar Cells

artículo científico publicado en 2016

Fast charge separation in a non-fullerene organic solar cell with a small driving force

article

Formation of nanopatterned polymer blends in photovoltaic devices

artículo científico publicado en 2010

Fullerene-Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability.

artículo científico publicado en 2016

High Performance and Stable All-Inorganic Metal Halide Perovskite-Based Photodetectors for Optical Communication Applications

scientific article published on 31 July 2018

High-Efficiency Flexible Solar Cells Based on Organometal Halide Perovskites

scientific article published on 15 December 2015

High-Performance Perovskite Light-Emitting Diode with Enhanced Operational Stability Using Lithium Halide Passivation

scientific article published on 29 January 2020

High-Quality Ruddlesden-Popper Perovskite Films Based on In Situ Formed Organic Spacer Cations

artículo científico publicado en 2019

Highly Efficient Perovskite Nanocrystal Light-Emitting Diodes Enabled by a Universal Crosslinking Method.

artículo científico publicado en 2016

Intermediate-phase-assisted low-temperature formation of γ-CsPbI3 films for high-efficiency deep-red light-emitting devices

scientific article published on 21 September 2020

Inverted all-polymer solar cells based on a quinoxaline–thiophene/naphthalene-diimide polymer blend improved by annealing

Long Electron-Hole Diffusion Length in High-Quality Lead-Free Double Perovskite Films.

artículo científico publicado en 2018

Low-Temperature Combustion-Synthesized Nickel Oxide Thin Films as Hole-Transport Interlayers for Solution-Processed Optoelectronic Devices

scholarly article by Sai Bai et al published 19 November 2013 in Advanced Energy Materials

Magnetizing lead-free halide double perovskites

artículo científico publicado en 2020

Mapping Polymer Donors toward High-Efficiency Fullerene Free Organic Solar Cells

artículo científico publicado en 2016

Metal halide perovskites for light-emitting diodes

scientific article published on 14 September 2020

Minimising efficiency roll-off in high-brightness perovskite light-emitting diodes.

artículo científico publicado en 2018

Morphology, Temperature, and Field Dependence of Charge Separation in High-Efficiency Solar Cells Based on Alternating Polyquinoxaline Copolymer

Neat C60:C70 buckminsterfullerene mixtures enhance polymer solar cell performance

Non-fullerene acceptor with low energy loss and high external quantum efficiency: towards high performance polymer solar cells

Organic-Inorganic Hybrid Ruddlesden-Popper Perovskites: An Emerging Paradigm for High-Performance Light-Emitting Diodes

artículo científico publicado en 2018

Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages

artículo científico publicado en 2019

Oxygen- and Water-Induced Energetics Degradation in Organometal Halide Perovskites.

artículo científico publicado en 2018

Perovskite light-emitting diodes based on solution-processed self-organized multiple quantum wells

artículo científico publicado en 2016

Perovskite-molecule composite thin films for efficient and stable light-emitting diodes

artículo científico publicado en 2020

Quantifying Loss Mechanisms in Polymer:Fullerene Photovoltaic Devices

article published in 2012

Regular Energetics at Conjugated Electrolyte/Electrode Modifier for Organic Electronics and their Implications on Design Rules

article

Reproducible Planar Heterojunction Solar Cells Based on One-Step Solution-Processed Methylammonium Lead Halide Perovskites

article by Sai Bai et al published 12 December 2016 in Chemistry of Materials

Room-temperature film formation of metal halide perovskites on n-type metal oxides: the catalysis of ZnO on perovskite crystallization

artículo científico publicado en 2018

Sequential Polymer Precipitation of Core-Shell Microstructured Composites with Giant Permittivity

artículo científico publicado en 2009

Simultaneously Achieved High Open-Circuit Voltage and Efficient Charge Generation by Fine-Tuning Charge-Transfer Driving Force in Nonfullerene Polymer Solar Cells

Stable and bright formamidinium-based perovskite light-emitting diodes with high energy conversion efficiency

scientific article published on 09 August 2019

Structural and Functional Diversity in Lead-Free Halide Perovskite Materials

artículo científico publicado en 2019

Synthesis of unstable colloidal inorganic nanocrystals through the introduction of a protecting ligand

artículo científico publicado en 2014

Temperature Dependence of Charge Carrier Generation in Organic Photovoltaics

scientific article published in Physical Review Letters

The Effect of Processing Additives on Energetic Disorder in Highly Efficient Organic Photovoltaics: A Case Study on PBDTTT-C-T:PC71BM

article

The effect of dislocations on the efficiency of InGaN/GaN solar cells

The effect of external electric field on the performance of perovskite solar cells

The surface-state-induced Stark effect in ZnO nanocrystals

Ti deficiency effect on the dielectric response of CaCu3Ti4O12 ceramics

article published in 2007

Trap-Induced Losses in Hybrid Photovoltaics

artículo científico publicado en 2014

Ultra-Bright Near-Infrared Perovskite Light-Emitting Diodes with Reduced Efficiency Roll-off

artículo científico publicado en 2018

Ultrafast long-range spin-funneling in solution-processed Ruddlesden-Popper halide perovskites

artículo científico publicado en 2019

Unveiling the synergistic effect of precursor stoichiometry and interfacial reactions for perovskite light-emitting diodes

scientific article published on 27 June 2019

Lista de obras de Feng Gao

14.7% Efficiency Organic Photovoltaic Cells Enabled by Active Materials with a Large Electrostatic Potential Difference

A dual ternary system for highly efficient ITO-free inverted polymer solar cells

A minimal non-radiative recombination loss for efficient non-fullerene all-small-molecule organic solar cells with a low energy loss of 0.54 eV and high open-circuit voltage of 1.15 V

A new tetracyclic lactam building block for thick, broad-bandgap photovoltaics.

A piperidinium salt stabilizes efficient metal-halide perovskite solar cells

All-small-molecule organic solar cells with over 14% efficiency by optimizing hierarchical morphologies

Author Correction: Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics

Balanced Partnership between Donor and Acceptor Components in Nonfullerene Organic Solar Cells with >12% Efficiency.

Band structure engineering in organic semiconductors

Barrierless Free Charge Generation in the High-Performance PM6:Y6 Bulk Heterojunction Non-Fullerene Solar Cell

Blue perovskite light-emitting diodes: progress, challenges and future directions

Bright Free Exciton Electroluminescence from Mn-Doped Two-Dimensional Layered Perovskites

Carbazole Functionalized Isocyanide Brushes in Heterojunction Photovoltaic Devices

Colloidal metal oxide nanocrystals as charge transporting layers for solution-processed light-emitting diodes and solar cells

Comparison of the Operation of Polymer/Fullerene, Polymer/Polymer, and Polymer/Nanocrystal Solar Cells: A Transient Photocurrent and Photovoltage Study

Conjugated Zwitterionic Polyelectrolyte as the Charge Injection Layer for High-Performance Polymer Light-Emitting Diodes

Control of exciton spin statistics through spin polarization in organic optoelectronic devices.

Defect Passivation for Red Perovskite Light-Emitting Diodes with Improved Brightness and Stability

Diffusion-Limited Crystallization: A Rationale for the Thermal Stability of Non-Fullerene Solar Cells

Disodium edetate as a promising interfacial material for inverted organic solar cells and the device performance optimization

Efficient Semitransparent Organic Solar Cells with Tunable Color enabled by an Ultralow-Bandgap Nonfullerene Acceptor.

Efficient and Tunable Electroluminescence from In Situ Synthesized Perovskite Quantum Dots

Efficient perovskite light-emitting diodes based on a solution-processed tin dioxide electron transport layer

Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics

Enhanced charge transport by incorporating additional thiophene units in the poly(fluorene-thienyl-benzothiadiazole) polymer

Extended Intermolecular Interactions Governing Photocurrent–Voltage Relations in Ternary Organic Solar Cells

Fast charge separation in a non-fullerene organic solar cell with a small driving force

Formation of nanopatterned polymer blends in photovoltaic devices

Fullerene-Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability.

High Performance and Stable All-Inorganic Metal Halide Perovskite-Based Photodetectors for Optical Communication Applications

High-Efficiency Flexible Solar Cells Based on Organometal Halide Perovskites

High-Performance Perovskite Light-Emitting Diode with Enhanced Operational Stability Using Lithium Halide Passivation

High-Quality Ruddlesden-Popper Perovskite Films Based on In Situ Formed Organic Spacer Cations

Highly Efficient Perovskite Nanocrystal Light-Emitting Diodes Enabled by a Universal Crosslinking Method.

Intermediate-phase-assisted low-temperature formation of γ-CsPbI3 films for high-efficiency deep-red light-emitting devices

Inverted all-polymer solar cells based on a quinoxaline–thiophene/naphthalene-diimide polymer blend improved by annealing

Long Electron-Hole Diffusion Length in High-Quality Lead-Free Double Perovskite Films.

Low-Temperature Combustion-Synthesized Nickel Oxide Thin Films as Hole-Transport Interlayers for Solution-Processed Optoelectronic Devices

Magnetizing lead-free halide double perovskites

Mapping Polymer Donors toward High-Efficiency Fullerene Free Organic Solar Cells

Metal halide perovskites for light-emitting diodes

Minimising efficiency roll-off in high-brightness perovskite light-emitting diodes.

Morphology, Temperature, and Field Dependence of Charge Separation in High-Efficiency Solar Cells Based on Alternating Polyquinoxaline Copolymer

Neat C60:C70 buckminsterfullerene mixtures enhance polymer solar cell performance

Non-fullerene acceptor with low energy loss and high external quantum efficiency: towards high performance polymer solar cells

Organic-Inorganic Hybrid Ruddlesden-Popper Perovskites: An Emerging Paradigm for High-Performance Light-Emitting Diodes

Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages

Oxygen- and Water-Induced Energetics Degradation in Organometal Halide Perovskites.

Perovskite light-emitting diodes based on solution-processed self-organized multiple quantum wells

Perovskite-molecule composite thin films for efficient and stable light-emitting diodes

Quantifying Loss Mechanisms in Polymer:Fullerene Photovoltaic Devices

Regular Energetics at Conjugated Electrolyte/Electrode Modifier for Organic Electronics and their Implications on Design Rules

Reproducible Planar Heterojunction Solar Cells Based on One-Step Solution-Processed Methylammonium Lead Halide Perovskites

Room-temperature film formation of metal halide perovskites on n-type metal oxides: the catalysis of ZnO on perovskite crystallization

Sequential Polymer Precipitation of Core-Shell Microstructured Composites with Giant Permittivity

Simultaneously Achieved High Open-Circuit Voltage and Efficient Charge Generation by Fine-Tuning Charge-Transfer Driving Force in Nonfullerene Polymer Solar Cells

Stable and bright formamidinium-based perovskite light-emitting diodes with high energy conversion efficiency

Structural and Functional Diversity in Lead-Free Halide Perovskite Materials

Synthesis of unstable colloidal inorganic nanocrystals through the introduction of a protecting ligand

Temperature Dependence of Charge Carrier Generation in Organic Photovoltaics

The Effect of Processing Additives on Energetic Disorder in Highly Efficient Organic Photovoltaics: A Case Study on PBDTTT-C-T:PC71BM

The effect of dislocations on the efficiency of InGaN/GaN solar cells

The effect of external electric field on the performance of perovskite solar cells

The surface-state-induced Stark effect in ZnO nanocrystals

Ti deficiency effect on the dielectric response of CaCu3Ti4O12 ceramics

Trap-Induced Losses in Hybrid Photovoltaics

Ultra-Bright Near-Infrared Perovskite Light-Emitting Diodes with Reduced Efficiency Roll-off

Ultrafast long-range spin-funneling in solution-processed Ruddlesden-Popper halide perovskites

Unveiling the synergistic effect of precursor stoichiometry and interfacial reactions for perovskite light-emitting diodes