Lista de obras - Evandro Piva - Dominio Público Uruguay

1,3-Diethyl-2-thiobarbituric acid as an alternative coinitiator for acidic photopolymerizable dental materials

artículo científico publicado en 2013

2,3-Epithiopropyl methacrylate as functionalized monomer in a dental adhesive.

artículo científico publicado en 2005

2-hydroxyethyl methacrylate as an inhibitor of matrix metalloproteinase-2.

artículo científico publicado en 2009

A new approach in self-etching adhesive formulations: replacing HEMA for surfactant dimethacrylate monomers.

artículo científico publicado en 2011

A systematic review about antibacterial monomers used in dental adhesive systems: Current status and further prospects.

artículo científico publicado en 2015

Acid etching concentration as a strategy to improve the adhesive performance on Er:YAG laser and bur-prepared demineralized enamel.

artículo científico publicado en 2014

Addition of phosphates and chlorhexidine to resin-modified MTA materials

scientific article published on 14 January 2019

Addition of zinc methacrylate in dental polymers: MMP-2 inhibition and ultimate tensile strength evaluation.

artículo científico publicado en 2011

Anti-Candida, anti-enzyme activity and cytotoxicity of 3,5-diaryl-4,5-dihydro-1H-pyrazole-1-carboximidamides.

artículo científico publicado en 2014

Antimicrobial activity of [2-(methacryloyloxy)ethyl]trimethylammonium chloride against Candida spp.

artículo científico publicado en 2011

Application of resin adhesive on the surface of a silanized glass fiber-reinforced post and its effect on the retention to root dentin.

artículo científico publicado en 2014

BAPO as an alternative photoinitiator for the radical polymerization of dental resins.

artículo científico publicado en 2014

Bioactive treatments in bone grafts for implant-based rehabilitation: Systematic review and meta-analysis

artículo científico publicado en 2017

Bond Strength of Methacrylate-based Blends Containing Elastomeric Monomers and Alternative Initiators after Thermomechanical Cycling

scientific article published on 01 January 2019

Bond strength of universal adhesives: A systematic review and meta-analysis.

artículo científico publicado en 2015

Bonding Performance of Universal Adhesives: An Updated Systematic Review and Meta-Analysis

scientific article published on 01 January 2019

Bonding Strength of Universal Adhesives to Indirect Substrates: A Meta-Analysis of in Vitro Studies

artículo científico publicado en 2020

Can viscosity of acid etchant influence the adhesion of fibre posts to root canal dentine?

artículo científico publicado en 2011

Characterization of an antimicrobial dental resin adhesive containing zinc methacrylate.

artículo científico publicado en 2011

Chemical-physical properties of experimental root canal sealers based on butyl ethylene glycol disalicylate and MTA.

artículo científico publicado en 2013

Clinical evaluation of two desensitizing treatments in southern Brazil: A 3-month follow-up.

artículo científico publicado en 2013

Clinical performance and wear resistance of two compomers in posterior occlusal restorations of permanent teeth: six-year follow-up.

artículo científico publicado en 2007

Could the application of bioactive molecules improve vital pulp therapy success? A systematic review

artículo científico publicado en 2016

Current trends and future perspectives of dental pulp capping materials: A systematic review.

artículo científico publicado en 2017

Cytotoxicity of Chelating Agents Used In Endodontics and Their Influence on MMPs of Cell Membranes

artículo científico publicado en 2020

Degree of conversion of etch-and-rinse and self-etch adhesives light-cured using QTH or LED.

artículo científico publicado en 2010

Dental Pulp Tissue Regeneration Using Dental Pulp Stem Cells Isolated and Expanded in Human Serum

artículo científico publicado en 2017

Development and characterization of a novel bulk-fill elastomeric temporary restorative composite

article

Development and characterization of novel ZnO-loaded electrospun membranes for periodontal regeneration.

artículo científico publicado en 2015

Development of an antibacterial and anti-metalloproteinase dental adhesive for long-lasting resin composite restorations

artículo científico publicado en 2020

Digital Smile Design for Computer-assisted Esthetic Rehabilitation: Two-year Follow-up.

artículo científico publicado en 2015

Disclosing the physiology of dental pulp for vital pulp therapy.

artículo científico publicado en 2018

Dyes for caries detection: influence on composite and compomer microleakage

artículo científico publicado en 2002

Effect of immediate and delayed light activation on the mechanical properties and degree of conversion in dual-cured resin cements

artículo científico publicado en 2012

Effect of immediate or delayed light activation on curing kinetics and shrinkage stress of dual-cure resin cements

artículo científico publicado en 2011

Effect of light-curing units, post-cured time and shade of resin cement on knoop hardness

artículo científico publicado en 2009

Effects of long-term water storage on the microtensile bond strength of five experimental self-etching adhesives based on surfactants rather than HEMA.

artículo científico publicado en 2012

Effects of metallic or translucent matrices for class II composite restorations: 4-year clinical follow-up findings

scientific article published on 05 January 2010

Efficacy of rhBMP-2 in Cleft Lip and Palate Defects: Systematic Review and Meta-analysis

artículo científico publicado en 2018

Evaluation of dentin hypersensitivity treatment with glass ionomer cements: A randomized clinical trial

artículo científico publicado en 2017

Evaluation of long-term bond strength and selected properties of self-adhesive resin cements.

artículo científico publicado en 2018

Evaluation of physical-mechanical properties, antibacterial effect, and cytotoxicity of temporary restorative materials

artículo científico publicado en 2018

Experimental Resin-Based Monoblock Endodontic Obturation System

scientific article published on 07 November 2019

Experimental Sealers Containing Metal Methacrylates: Physical and Biological Properties.

artículo científico

Experimental self-etching HEMA-free adhesive systems: cytotoxicity and degree of conversion.

artículo científico publicado en 2015

Fiber-reinforced fixed partial dentures: a preliminary retrospective clinical study.

artículo científico publicado en 2006

Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review

artículo científico publicado en 2016

Functionalized scaffolds to control dental pulp stem cell fate

artículo científico publicado en 2014

Histologic response and tenascin and fibronectin expression after pulp capping in pig primary teeth with mineral trioxide aggregate or calcium hydroxide

artículo científico publicado en 2011

Histological Evaluation of Bone Repair with Hydroxyapatite: A Systematic Review.

artículo científico publicado en 2017

Hybridization morphology and dentin bond stability of self-etch primers with different ethanol/water ratios

artículo científico publicado en 2011

Immunohistochemical expression of fibronectin and tenascin after direct pulp capping with calcium hydroxide

artículo científico publicado en 2006

Impact of curing protocol on the selected properties of a model bis-GMA/TEGDMA dental resin composite.

artículo científico publicado en 2009

Impact of immediate and delayed light activation on self-polymerization of dual-cured dental resin luting agents.

artículo científico publicado en 2009

Impact of shelf-life simulation on bonding performance of universal adhesive systems

scientific article published on 19 June 2019

In-depth polymerization of dual-cured resin cement assessed by hardness.

artículo científico publicado en 2008

Influence of 2-hydroxyethyl methacrylate concentration on polymer network of adhesive resin

artículo científico publicado en 2011

Influence of Cervical Preflaring on the Incidence of Root Dentin Defects

artículo científico publicado en 2017

Influence of Surface Treatment on Composite Adhesion in Noncarious Cervical Lesions: Systematic Review and Meta-analysis

artículo científico publicado en 2018

Influence of chain extender length of aromatic dimethacrylates on polymer network development.

artículo científico publicado en 2007

Influence of energy density of different light sources on Knoop hardness of a dual-cured resin cement

artículo científico publicado en 2008

Influence of the restoration quality on the success of pulpotomy treatment: a preliminary retrospective study

artículo científico publicado en 2005

Inhibition of the activity of matrix metalloproteinase 2 by triethylene glycol dimethacrylate.

artículo científico publicado en 2010

Is a calcium hydroxide liner necessary in the treatment of deep caries lesions? - A systematic review and meta-analysis

artículo científico publicado en 2018

Kinetics of conversion of two dual-cured adhesive systems.

artículo científico publicado en 2008

Light- and time-dependent polymerization of dual-cured resin luting agent beneath ceramic

artículo científico publicado en 2008

Light-activation of resin cement through ceramic: relationship between irradiance intensity and bond strength to dentin

scientific article published on 01 April 2008

Long-term bonding efficacy of adhesives containing benzodioxioles as alternative co-initiators

scientific article published on 11 October 2018

Microleakage in bonded amalgam restorations using different adhesive materials

artículo científico publicado en 2004

Nanofiller loading level: Influence on selected properties of an adhesive resin.

artículo científico publicado en 2009

New adhesive system based in metals cross-linking methacrylate.

artículo científico publicado en 2017

New generation bulk-fill resin composites: Effects on mechanical strength and fracture reliability

scientific article published on 27 April 2019

Onium salt improves the polymerization kinetics in an experimental dental adhesive resin.

artículo científico publicado en 2007

Onium salt reduces the inhibitory polymerization effect from an organic solvent in a model dental adhesive resin.

artículo científico publicado en 2008

Panavia F: the role of the primer.

artículo científico publicado en 2009

Papain-based gel for biochemical caries removal: influence on microtensile bond strength to dentin

article

Pentaerythritol Tetrasalicylate in the Chemical Composition of Root Canal Sealers

artículo científico publicado en 2018

Physical Properties of MTA Fillapex Sealer

scientific article published on 22 May 2013

Physical and Biological Properties of a High-Plasticity Tricalcium Silicate Cement

artículo científico publicado en 2018

Physicochemical Properties of MTA and Portland Cement after Addition of Aloe Vera.

artículo científico publicado en 2017

Piperonyl methacrylate: Copolymerizable coinitiator for adhesive compositions

scientific article published on 22 September 2018

Polymerization kinetics and reactivity of alternative initiators systems for use in light-activated dental resins

scientific article published on 18 October 2012

Polymerization shrinkage stress of resin-based dental materials: A systematic review and meta-analyses of composition strategies

artículo científico publicado en 2018

Polymerization shrinkage stress of resin-based dental materials: A systematic review and meta-analyses of technique protocol and photo-activation strategies.

artículo científico publicado en 2018

Polypropylene glycol phosphate methacrylate as an alternative acid-functional monomer on self-etching adhesives

artículo científico publicado en 2014

Preparation and evaluation of dental resin luting agents with increasing content of bisphenol-A ethoxylated dimethacrylate.

artículo científico publicado en 2008

Preparation, modification, and characterization of alginate hydrogel with nano-/microfibers: a new perspective for tissue engineering.

artículo científico publicado en 2013

Replacing HEMA with alternative dimethacrylates in dental adhesive systems: evaluation of polymerization kinetics and physicochemical properties

scientific article published on 01 June 2014

Self-etching dental adhesive containing a natural essential oil: anti-biofouling performance and mechanical properties.

artículo científico publicado en 2013

Synthesis and characterization of CaO-loaded electrospun matrices for bone tissue engineering.

artículo científico publicado en 2015

Synthesis of an allyl carbonate monomer as alternative to TEGDMA in the formulation of dental composite resins

artículo científico publicado en 2018

Tetrahydrofuran as alternative solvent in dental adhesive systems

artículo científico publicado en 2009

Tetrahydrofuran as solvent in dental adhesives: cytotoxicity and dentin bond stability.

artículo científico publicado en 2012

The effect of polishing techniques and time on the surface characteristics and sealing ability of resin composite restorations after one-year storage

artículo científico publicado en 2008

The influence of haemostatic agents on healing of healthy human dental pulp tissue capped with calcium hydroxide

artículo científico publicado en 2006

UV-Vis spectrophotometric analysis and light irradiance through hot-pressed and hot-pressed-veneered glass ceramics.

artículo científico publicado en 2008

Use of dental adhesives as modeler liquid of resin composites

artículo científico publicado en 2016

Ytterbium trifluoride as a radiopaque agent for dental cements.

artículo científico publicado en 2010

Lista de obras de Evandro Piva

1,3-Diethyl-2-thiobarbituric acid as an alternative coinitiator for acidic photopolymerizable dental materials

2,3-Epithiopropyl methacrylate as functionalized monomer in a dental adhesive.

2-hydroxyethyl methacrylate as an inhibitor of matrix metalloproteinase-2.

A new approach in self-etching adhesive formulations: replacing HEMA for surfactant dimethacrylate monomers.

A systematic review about antibacterial monomers used in dental adhesive systems: Current status and further prospects.

Acid etching concentration as a strategy to improve the adhesive performance on Er:YAG laser and bur-prepared demineralized enamel.

Addition of phosphates and chlorhexidine to resin-modified MTA materials

Addition of zinc methacrylate in dental polymers: MMP-2 inhibition and ultimate tensile strength evaluation.

Anti-Candida, anti-enzyme activity and cytotoxicity of 3,5-diaryl-4,5-dihydro-1H-pyrazole-1-carboximidamides.

Antimicrobial activity of [2-(methacryloyloxy)ethyl]trimethylammonium chloride against Candida spp.

Application of resin adhesive on the surface of a silanized glass fiber-reinforced post and its effect on the retention to root dentin.

BAPO as an alternative photoinitiator for the radical polymerization of dental resins.

Bioactive treatments in bone grafts for implant-based rehabilitation: Systematic review and meta-analysis

Bond Strength of Methacrylate-based Blends Containing Elastomeric Monomers and Alternative Initiators after Thermomechanical Cycling

Bond strength of universal adhesives: A systematic review and meta-analysis.

Bonding Performance of Universal Adhesives: An Updated Systematic Review and Meta-Analysis

Bonding Strength of Universal Adhesives to Indirect Substrates: A Meta-Analysis of in Vitro Studies

Can viscosity of acid etchant influence the adhesion of fibre posts to root canal dentine?

Characterization of an antimicrobial dental resin adhesive containing zinc methacrylate.

Chemical-physical properties of experimental root canal sealers based on butyl ethylene glycol disalicylate and MTA.

Clinical evaluation of two desensitizing treatments in southern Brazil: A 3-month follow-up.

Clinical performance and wear resistance of two compomers in posterior occlusal restorations of permanent teeth: six-year follow-up.

Could the application of bioactive molecules improve vital pulp therapy success? A systematic review

Current trends and future perspectives of dental pulp capping materials: A systematic review.

Cytotoxicity of Chelating Agents Used In Endodontics and Their Influence on MMPs of Cell Membranes

Degree of conversion of etch-and-rinse and self-etch adhesives light-cured using QTH or LED.

Dental Pulp Tissue Regeneration Using Dental Pulp Stem Cells Isolated and Expanded in Human Serum

Development and characterization of a novel bulk-fill elastomeric temporary restorative composite

Development and characterization of novel ZnO-loaded electrospun membranes for periodontal regeneration.

Development of an antibacterial and anti-metalloproteinase dental adhesive for long-lasting resin composite restorations

Digital Smile Design for Computer-assisted Esthetic Rehabilitation: Two-year Follow-up.

Disclosing the physiology of dental pulp for vital pulp therapy.

Dyes for caries detection: influence on composite and compomer microleakage

Effect of immediate and delayed light activation on the mechanical properties and degree of conversion in dual-cured resin cements

Effect of immediate or delayed light activation on curing kinetics and shrinkage stress of dual-cure resin cements

Effect of light-curing units, post-cured time and shade of resin cement on knoop hardness

Effects of long-term water storage on the microtensile bond strength of five experimental self-etching adhesives based on surfactants rather than HEMA.

Effects of metallic or translucent matrices for class II composite restorations: 4-year clinical follow-up findings

Efficacy of rhBMP-2 in Cleft Lip and Palate Defects: Systematic Review and Meta-analysis

Evaluation of dentin hypersensitivity treatment with glass ionomer cements: A randomized clinical trial

Evaluation of long-term bond strength and selected properties of self-adhesive resin cements.

Evaluation of physical-mechanical properties, antibacterial effect, and cytotoxicity of temporary restorative materials

Experimental Resin-Based Monoblock Endodontic Obturation System

Experimental Sealers Containing Metal Methacrylates: Physical and Biological Properties.

Experimental self-etching HEMA-free adhesive systems: cytotoxicity and degree of conversion.

Fiber-reinforced fixed partial dentures: a preliminary retrospective clinical study.

Fifty years of Brazilian Dental Materials Group: scientific contributions of dental materials field evaluated by systematic review

Functionalized scaffolds to control dental pulp stem cell fate

Histologic response and tenascin and fibronectin expression after pulp capping in pig primary teeth with mineral trioxide aggregate or calcium hydroxide

Histological Evaluation of Bone Repair with Hydroxyapatite: A Systematic Review.

Hybridization morphology and dentin bond stability of self-etch primers with different ethanol/water ratios

Immunohistochemical expression of fibronectin and tenascin after direct pulp capping with calcium hydroxide

Impact of curing protocol on the selected properties of a model bis-GMA/TEGDMA dental resin composite.

Impact of immediate and delayed light activation on self-polymerization of dual-cured dental resin luting agents.

Impact of shelf-life simulation on bonding performance of universal adhesive systems

In-depth polymerization of dual-cured resin cement assessed by hardness.

Influence of 2-hydroxyethyl methacrylate concentration on polymer network of adhesive resin

Influence of Cervical Preflaring on the Incidence of Root Dentin Defects

Influence of Surface Treatment on Composite Adhesion in Noncarious Cervical Lesions: Systematic Review and Meta-analysis

Influence of chain extender length of aromatic dimethacrylates on polymer network development.

Influence of energy density of different light sources on Knoop hardness of a dual-cured resin cement

Influence of the restoration quality on the success of pulpotomy treatment: a preliminary retrospective study

Inhibition of the activity of matrix metalloproteinase 2 by triethylene glycol dimethacrylate.

Is a calcium hydroxide liner necessary in the treatment of deep caries lesions? - A systematic review and meta-analysis

Kinetics of conversion of two dual-cured adhesive systems.

Light- and time-dependent polymerization of dual-cured resin luting agent beneath ceramic

Light-activation of resin cement through ceramic: relationship between irradiance intensity and bond strength to dentin

Long-term bonding efficacy of adhesives containing benzodioxioles as alternative co-initiators

Microleakage in bonded amalgam restorations using different adhesive materials

Nanofiller loading level: Influence on selected properties of an adhesive resin.

New adhesive system based in metals cross-linking methacrylate.

New generation bulk-fill resin composites: Effects on mechanical strength and fracture reliability

Onium salt improves the polymerization kinetics in an experimental dental adhesive resin.

Onium salt reduces the inhibitory polymerization effect from an organic solvent in a model dental adhesive resin.

Panavia F: the role of the primer.

Papain-based gel for biochemical caries removal: influence on microtensile bond strength to dentin

Pentaerythritol Tetrasalicylate in the Chemical Composition of Root Canal Sealers

Physical Properties of MTA Fillapex Sealer

Physical and Biological Properties of a High-Plasticity Tricalcium Silicate Cement