Lista de obras - Manuel Toledano - Dominio Público Uruguay

A Zn-doped etch-and-rinse adhesive may improve the mechanical properties and the integrity at the bonded-dentin interface.

artículo científico publicado en 2013

A ZnO-doped adhesive reduced collagen degradation favouring dentine remineralization

artículo científico publicado en 2012

Adjunctive use of an anti-oxidant agent to improve resistance of hybrid layers to degradation

scientific article published on 28 October 2010

Assessment of the quality of resin–dentin bonded interfaces: An AFM nano-indentation, μTBS and confocal ultramorphology study

artículo científico publicado en 2012

Bioactive Polymeric Nanoparticles for Periodontal Therapy

artículo científico publicado en 2016

Bioactivity of zinc-doped dental adhesives.

artículo científico publicado en 2013

Bleaching Agents Increase Metalloproteinases-mediated Collagen Degradation in Dentin

artículo científico publicado en 2011

Bond strength and nanoroughness assessment on human pretreated cementum surfaces

artículo científico publicado en 2010

Bonding efficacy of an acetone/based etch-and-rinse adhesive after dentin deproteinization

artículo científico publicado en 2012

Characterization of Micro- and Nanophase Separation of Dentin Bonding Agents by Stereoscopy and Atomic Force Microscopy

artículo científico publicado en 2012

Comparison of bond stability between dual-cure resin cements and pretreated glass-infiltrated alumina ceramics.

artículo científico publicado en 2011

Dentin regional bond strength of self-etch and total-etch adhesive systems.

artículo científico

Dentin treatment effects on the bonding performance of self-adhesive resin cements

artículo científico publicado en 2010

Dentin wetting by four adhesive systems

artículo científico publicado en 2001

Determining efficacy of monitoring devices on ceramic bond to resin composite

artículo científico publicado en 2012

Differential bonds degradation of two resin-modified glass-ionomer cements in primary and permanent teeth

artículo científico publicado en 2009

Differential effect of in vitro degradation on resin-dentin bonds produced by self-etch versus total-etch adhesives.

artículo científico publicado en 2006

Differential expression of matrix metalloproteinase-2 in human coronal and radicular sound and carious dentine.

artículo científico publicado en 2010

Differential nanofiller cluster formations in dental adhesive systems.

artículo científico publicado en 2011

Differential resin-dentin bonds created after caries removal with polymer burs.

artículo científico publicado en 2012

Doxycycline functionalized polymeric nanoparticles inhibit Enterococcus faecalis biofilm formation on dentine

artículo científico publicado en 2020

Durability of resin–dentin bonds: Effects of direct/indirect exposure and storage media

artículo científico publicado en 2007

Early dentine remineralisation: Morpho-mechanical assessment

artículo científico publicado en 2014

Effect of acid etching and collagen removal on dentin wettability and roughness.

artículo científico publicado en 1999

Effect of alloy type and casting technique on the fracture strength of implant-cemented structures

artículo científico publicado en 2011

Effect of bacterial collagenase on resin–dentin bonds degradation

artículo científico publicado en 2007

Effect of curing protocol on the polymerization of dual-cured resin cements.

artículo científico publicado en 2010

Effect of cyclic loading on bonding of fiber posts to root canal dentin.

artículo científico publicado en 2008

Effect of cyclic loading on the microtensile bond strengths of total-etch and self-etch adhesives.

artículo científico publicado en 2006

Effect of dentin etching and chlorhexidine application on metalloproteinase-mediated collagen degradation

scientific article published on February 2011

Effect of different surface treatments on In-Ceram Alumina roughness. An AFM study

artículo científico publicado en 2009

Effect of load cycling andin vitro degradation on resin-dentin bonds using a self-etching primer

artículo científico publicado en 2005

Effect of simulated pulpal pressure on dentin permeability and adhesion of self-etch adhesives

Effect of simulated pulpal pressure on self-adhesive cements bonding to dentin.

artículo científico publicado en 2008

Effect of sodium hypochlorite on dentin bonding with a polyalkenoic acid-containing adhesive system

artículo científico publicado en 2002

Effect of thermal cycling on the bond strength of self-adhesive cements to fiber posts

scientific article published on 14 June 2011

Effect of water aging on microtensile bond strength of dual-cured resin cements to pre-treated sintered zirconium-oxide ceramics

artículo científico publicado en 2009

Effect of water contamination on the shear bond strength of five orthodontic adhesives

artículo científico publicado en 2010

Effects of adhesive systems and luting agents on bonding of fiber posts to root canal dentin

artículo científico publicado en 2006

Efficacy of two contemporary single-cone filling techniques in preventing bacterial leakage

artículo científico publicado en 2007

ElectroBond application may improve wetting characteristics of etched dentine

artículo científico publicado en 2011

Ethanol wet-bonding technique sensitivity assessed by AFM.

artículo científico publicado en 2010

Evaluation of the micro-mechanical strength of resin bonded–dentin interfaces submitted to short-term degradation strategies

artículo científico publicado en 2012

Experimental Resin Cements Containing Bioactive Fillers Reduce Matrix Metalloproteinase–mediated Dentin Collagen Degradation

artículo científico publicado en 2012

Functional and molecular structural analysis of dentine interfaces promoted by a Zn-doped self-etching adhesive and an in vitro load cycling model.

artículo científico publicado en 2015

Hybrid layers of etch-and-rinse versus self-etching adhesive systems

artículo científico publicado en 2010

Hydrolytic stability of composite repair bond

artículo científico publicado en 2007

Hydrolytic stability of experimental hydroxyapatite-filled dental composite materials.

artículo científico publicado en 2003

Improved Sealing and Remineralization at the Resin-Dentin Interface After Phosphoric Acid Etching and Load Cycling.

artículo científico publicado en 2015

In vitro hydrolytic degradation of composite quartz fiber-post bonds created by hydrophilic silane couplings.

artículo científico publicado en 2006

In vitro mechanical stimulation promoted remineralization at the resin/dentin interface.

artículo científico publicado en 2013

Increases in Dentin-bond Strength If Doubling Application Time of an Acetone-containing One-step Adhesive

artículo científico publicado en 2007

Influence of air-abrasion executed with polyacrylic acid-Bioglass 45S5 on the bonding performance of a resin-modified glass ionomer cement

artículo científico publicado en 2012

Influence of application parameters on bond strength of an “all in one” water-based self-etching primer/adhesive after 6 and 12 months of water aging

artículo científico publicado en 2010

Influence of different surface treatments on surface zirconia frameworks

artículo científico publicado en 2009

Influence of drying time and temperature on bond strength of contemporary adhesives to dentine

artículo científico publicado en 2009

Influence of phosphoproteins' biomimetic analogs on remineralization of mineral-depleted resin-dentin interfaces created with ion-releasing resin-based systems.

artículo científico publicado en 2015

Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic

artículo científico publicado en 2008

Influence of the hydrostatic pulpal pressure on droplets formation in current etch-and-rinse and self-etch adhesives: A video rate/TSM microscopy and fluid filtration study

artículo científico publicado en 2009

Ion-modified nanoparticles induce different apatite formation in cervical dentine

artículo científico publicado en 2018

Ions-modified nanoparticles affect functional remineralization and energy dissipation through the resin-dentin interface.

artículo científico publicado en 2017

Limited Decalcification/Diffusion of Self-adhesive Cements into Dentin

scientific article published on 01 October 2008

Load cycling enhances bioactivity at the resin-dentin interface

artículo científico publicado en 2014

Magnesium phosphate cements for endodontic applications with improved long-term sealing ability

artículo científico publicado en 2013

Masticatory function induced changes, at subnanostructural level, in proteins and mineral at the resin-dentine interface

artículo científico publicado en 2014

Mechanical and chemical characterisation of demineralised human dentine after amalgam restorations

artículo científico publicado en 2015

Microanalysis of thermal-induced changes at the resin-dentin interface.

artículo científico publicado en 2014

Microhardness of acid-treated and resin infiltrated human dentine

artículo científico publicado en 2005

Microleakage of composite restorations after acid or Er-YAG laser cavity treatments

artículo científico publicado en 2001

Microtensile bond strength of total-etch and self-etching adhesives to caries-affected dentine

artículo científico publicado en 2003

Morphological analysis of three zirconium oxide ceramics: Effect of surface treatments

artículo científico publicado en 2010

Multinuclear magnetic resonance studies on the chemical interaction of a self-etching adhesive with radicular and coronal human dentin

artículo científico publicado en 2007

Nanoscopic dynamic mechanical analysis of resin-infiltrated dentine, under in vitro chewing and bruxism events.

artículo científico publicado en 2015

New Advanced Materials for High Performance at the Resin-Dentine Interface.

artículo científico publicado en 2015

Novel light-cured resins and composites with improved physicochemical properties

artículo científico publicado en 2006

Novel potential scaffold for periodontal tissue engineering

artículo científico publicado en 2017

On modeling and nanoanalysis of caries-affected dentin surfaces restored with Zn-containing amalgam and in vitro oral function

artículo científico publicado en 2015

Oral Function Improves Interfacial Integrity and Sealing Ability Between Conventional Glass Ionomer Cements and Dentin.

artículo científico publicado en 2017

Polyaspartic acid enhances dentine remineralization bonded with a zinc-doped Portland-based resin cement.

artículo científico publicado en 2015

Polymer nanocarriers for dentin adhesion.

artículo científico publicado en 2014

Polymerization kinetics and mechanical characterization of new formulations of light-cured dental sealants

artículo científico publicado en 2006

Post-surface conditioning improves interfacial adhesion in post/core restorations.

artículo científico publicado en 2005

Primary dentin etching time, bond strength and ultra-structure characterization of dentin surfaces

artículo científico publicado en 2010

Principal component analysis and cluster analysis for the characterization of dental composites

artículo científico publicado en 2000

Reactivation of inactivated endogenous proteolytic activities in phosphoric acid-etched dentine by etch-and-rinse adhesives

Remineralization of mechanical loaded resin-dentin interface: a transitional and synchronized multistep process

artículo científico publicado en 2014

Resin–dentin bonds to EDTA-treated vs. acid-etched dentin using ethanol wet-bonding. Part II: Effects of mechanical cycling load on microtensile bond strengths

artículo científico publicado en 2011

Resistance to degradation of resin–dentin bonds using a one-step HEMA-free adhesive

artículo científico publicado en 2006

Self-etching zinc-doped adhesives improve the potential of caries-affected dentin to be functionally remineralized

artículo científico publicado en 2015

Sorption and solubility of resin-based restorative dental materials

artículo científico publicado en 2003

Sorption and solubility testing of orthodontic bonding cements in different solutions

artículo científico publicado en 2006

Spatially resolved photopolymerization kinetics and oxygen inhibition in dental adhesives

artículo científico publicado en 2005

Surface microanalysis and chemical imaging of early dentin remineralization

artículo científico publicado en 2013

Surface treatments for improving bond strength to prefabricated fiber posts: a literature review.

artículo científico publicado en 2008

Synthesis and characterization of hybrid silica/PMMA nanoparticles and their use as filler in dental composites.

artículo científico publicado en 2014

The dentine remineralization activity of a desensitizing bioactive glass-containing toothpaste: an in vitro study

artículo científico publicado en 2011

The effect of surface treatments on the microroughness of laser-sintered and vacuum-cast base metal alloys for dental prosthetic frameworks.

artículo científico publicado en 2012

Therapeutic effects of novel resin bonding systems containing bioactive glasses on mineral-depleted areas within the bonded-dentine interface.

artículo científico publicado en 2012

Wetting ability of an acetone/based etch&rinse adhesive after NaOCl-treatment

artículo científico publicado en 2012

Work of fracture of a composite resin: fracture-toughening mechanisms

artículo científico publicado en 2009

Zinc Incorporation Improves Biological Activity of Beta-tricalcium Silicate Resin–based Cement

scientific article published on 13 August 2014

Zinc induces apatite and scholzite formation during dentin remineralization

artículo científico publicado en 2014

Zinc reduces collagen degradation in demineralized human dentin explants ⬇️

artículo científico publicado el 23 de noviembre de 2010

Zinc-Containing Restorations Create Amorphous Biogenic Apatite at the Carious Dentin Interface: A X-Ray Diffraction (XRD) Crystal Lattice Analysis

artículo científico publicado en 2016

Zinc-Inhibited MMP-Mediated Collagen Degradation after Different Dentine Demineralization Procedures

artículo científico publicado en 2012

Zinc-doped dentin adhesive for collagen protection at the hybrid layer

scientific article published on 01 October 2011

Lista de obras de Manuel Toledano

A Zn-doped etch-and-rinse adhesive may improve the mechanical properties and the integrity at the bonded-dentin interface.

A ZnO-doped adhesive reduced collagen degradation favouring dentine remineralization

Adjunctive use of an anti-oxidant agent to improve resistance of hybrid layers to degradation

Assessment of the quality of resin–dentin bonded interfaces: An AFM nano-indentation, μTBS and confocal ultramorphology study

Bioactive Polymeric Nanoparticles for Periodontal Therapy

Bioactivity of zinc-doped dental adhesives.

Bleaching Agents Increase Metalloproteinases-mediated Collagen Degradation in Dentin

Bond strength and nanoroughness assessment on human pretreated cementum surfaces

Bonding efficacy of an acetone/based etch-and-rinse adhesive after dentin deproteinization

Characterization of Micro- and Nanophase Separation of Dentin Bonding Agents by Stereoscopy and Atomic Force Microscopy

Comparison of bond stability between dual-cure resin cements and pretreated glass-infiltrated alumina ceramics.

Dentin regional bond strength of self-etch and total-etch adhesive systems.

Dentin treatment effects on the bonding performance of self-adhesive resin cements

Dentin wetting by four adhesive systems

Determining efficacy of monitoring devices on ceramic bond to resin composite

Differential bonds degradation of two resin-modified glass-ionomer cements in primary and permanent teeth

Differential effect of in vitro degradation on resin-dentin bonds produced by self-etch versus total-etch adhesives.

Differential expression of matrix metalloproteinase-2 in human coronal and radicular sound and carious dentine.

Differential nanofiller cluster formations in dental adhesive systems.

Differential resin-dentin bonds created after caries removal with polymer burs.

Doxycycline functionalized polymeric nanoparticles inhibit Enterococcus faecalis biofilm formation on dentine

Durability of resin–dentin bonds: Effects of direct/indirect exposure and storage media

Early dentine remineralisation: Morpho-mechanical assessment

Effect of acid etching and collagen removal on dentin wettability and roughness.

Effect of alloy type and casting technique on the fracture strength of implant-cemented structures

Effect of bacterial collagenase on resin–dentin bonds degradation

Effect of curing protocol on the polymerization of dual-cured resin cements.

Effect of cyclic loading on bonding of fiber posts to root canal dentin.

Effect of cyclic loading on the microtensile bond strengths of total-etch and self-etch adhesives.

Effect of dentin etching and chlorhexidine application on metalloproteinase-mediated collagen degradation

Effect of different surface treatments on In-Ceram Alumina roughness. An AFM study

Effect of load cycling andin vitro degradation on resin-dentin bonds using a self-etching primer

Effect of simulated pulpal pressure on dentin permeability and adhesion of self-etch adhesives

Effect of simulated pulpal pressure on self-adhesive cements bonding to dentin.

Effect of sodium hypochlorite on dentin bonding with a polyalkenoic acid-containing adhesive system

Effect of thermal cycling on the bond strength of self-adhesive cements to fiber posts

Effect of water aging on microtensile bond strength of dual-cured resin cements to pre-treated sintered zirconium-oxide ceramics

Effect of water contamination on the shear bond strength of five orthodontic adhesives

Effects of adhesive systems and luting agents on bonding of fiber posts to root canal dentin

Efficacy of two contemporary single-cone filling techniques in preventing bacterial leakage

ElectroBond application may improve wetting characteristics of etched dentine

Ethanol wet-bonding technique sensitivity assessed by AFM.

Evaluation of the micro-mechanical strength of resin bonded–dentin interfaces submitted to short-term degradation strategies

Experimental Resin Cements Containing Bioactive Fillers Reduce Matrix Metalloproteinase–mediated Dentin Collagen Degradation

Functional and molecular structural analysis of dentine interfaces promoted by a Zn-doped self-etching adhesive and an in vitro load cycling model.

Hybrid layers of etch-and-rinse versus self-etching adhesive systems

Hydrolytic stability of composite repair bond

Hydrolytic stability of experimental hydroxyapatite-filled dental composite materials.

Improved Sealing and Remineralization at the Resin-Dentin Interface After Phosphoric Acid Etching and Load Cycling.

In vitro hydrolytic degradation of composite quartz fiber-post bonds created by hydrophilic silane couplings.

In vitro mechanical stimulation promoted remineralization at the resin/dentin interface.

Increases in Dentin-bond Strength If Doubling Application Time of an Acetone-containing One-step Adhesive

Influence of air-abrasion executed with polyacrylic acid-Bioglass 45S5 on the bonding performance of a resin-modified glass ionomer cement

Influence of application parameters on bond strength of an “all in one” water-based self-etching primer/adhesive after 6 and 12 months of water aging

Influence of different surface treatments on surface zirconia frameworks

Influence of drying time and temperature on bond strength of contemporary adhesives to dentine

Influence of phosphoproteins' biomimetic analogs on remineralization of mineral-depleted resin-dentin interfaces created with ion-releasing resin-based systems.

Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic

Influence of the hydrostatic pulpal pressure on droplets formation in current etch-and-rinse and self-etch adhesives: A video rate/TSM microscopy and fluid filtration study

Ion-modified nanoparticles induce different apatite formation in cervical dentine

Ions-modified nanoparticles affect functional remineralization and energy dissipation through the resin-dentin interface.

Limited Decalcification/Diffusion of Self-adhesive Cements into Dentin

Load cycling enhances bioactivity at the resin-dentin interface

Magnesium phosphate cements for endodontic applications with improved long-term sealing ability

Masticatory function induced changes, at subnanostructural level, in proteins and mineral at the resin-dentine interface

Mechanical and chemical characterisation of demineralised human dentine after amalgam restorations

Microanalysis of thermal-induced changes at the resin-dentin interface.

Microhardness of acid-treated and resin infiltrated human dentine

Microleakage of composite restorations after acid or Er-YAG laser cavity treatments

Microtensile bond strength of total-etch and self-etching adhesives to caries-affected dentine

Morphological analysis of three zirconium oxide ceramics: Effect of surface treatments

Multinuclear magnetic resonance studies on the chemical interaction of a self-etching adhesive with radicular and coronal human dentin

Nanoscopic dynamic mechanical analysis of resin-infiltrated dentine, under in vitro chewing and bruxism events.

New Advanced Materials for High Performance at the Resin-Dentine Interface.

Novel light-cured resins and composites with improved physicochemical properties

Novel potential scaffold for periodontal tissue engineering

On modeling and nanoanalysis of caries-affected dentin surfaces restored with Zn-containing amalgam and in vitro oral function

Oral Function Improves Interfacial Integrity and Sealing Ability Between Conventional Glass Ionomer Cements and Dentin.

Polyaspartic acid enhances dentine remineralization bonded with a zinc-doped Portland-based resin cement.