Lista de obras - Paola Fabbri - Dominio Público Uruguay

45S5 Bioglass®-derived scaffolds coated with organic–inorganic hybrids containing graphene

artículo científico publicado en 2013

Anti-scratch and adhesion properties of photo-curable polymer/clay nanocomposite coatings based on methacrylate monomers

Bentonite-based organoclays as innovative flame retardants agents for SBS copolymer

artículo científico publicado en 2008

Carbon Nanotubes/Regenerated Silk Composite as a Three-Dimensional Printable Bio-Adhesive Ink with Self-Powering Properties

artículo científico publicado en 2021

Cohesive and adhesive properties of polycaprolactone/silica hybrid coatings on poly(methyl methacrylate) substrates

Construction and evaluation of a disposable pH sensor based on a large core plastic optical fiber

artículo científico publicado en 2011

Continuous haematic pH monitoring in extracorporeal circulation using a disposable florescence sensing element

artículo científico publicado en 2013

Design of surface properties of PET films: Effect of fluorinated block copolymers

article published in 2007

Development of a low-cost pH sensor based on plastic optical fibers

article

Disposable fluorescence optical pH sensor for near neutral solutions

artículo científico publicado en 2012

Electrical behavior of PET films coated with nanostructured organic–inorganic hybrids

Enhancing the scratch resistance of polycarbonate with poly(ethylene oxide)-silica hybrid coatings

Facile method based on 19F-NMR for the determination of hydroxyl value and molecular weight of hydroxyl terminated polymers

scientific article published on 08 February 2019

Flame retarding poly(methyl methacrylate) with nanostructured organic–inorganic hybrids coatings

article published in 2003

Functionally modified core-shell silica nanoparticles by one-pot synthesis

Haematic pH sensor for extracorporeal circulation

High-density polyethylene reinforced with submicron titania particles

scholarly article in Polymer Engineering and Science, vol. 48 no. 3, 2008

Highly luminescent yttria–silica core–shell nanoparticles by the sacrificial polymer shell method

Highly porous polycaprolactone-45S5 Bioglass® scaffolds for bone tissue engineering

scholarly article by Paola Fabbri et al published November 2010 in Composites Science and Technology

Highly stable plastic optical fibre amplifiers containing [Eu(btfa)3(MeOH)(bpeta)]: A luminophore able to drive the synthesis of polyisocyanates

Hydrophobic and oleophobic coatings based on perfluoropolyether/silica hybrids by the sol-gel method

Improvement of the surface properties of polycarbonate by organic–inorganic hybrid coatings

article

Improving the creep stability of high-density polyethylene with acicular titania nanoparticles

In-situ graphene oxide reduction during UV-photopolymerization of graphene oxide/acrylic resins mixtures

Modification of EVOH copolymers withε-caprolactone: synthesis and compatibilization effects in PE/PVC blends

Modification of PET by reactive blending with sulfonated esters, 1. Synthesis and characterization of PET-ionomers

Modification of cellulose fibres with organosilanes: Under what conditions does coupling occur?

artículo científico publicado en 2004

Monitoring of the Sol-Gel Synthesis of Organic-inorganic Hybrids by FTIR Transmission, FTIR/ATR, NIR and Raman Spectroscopy

article

Multilayer films composed of conductive poly(3-hydroxybutyrate)/carbon nanotubes bionanocomposites and a photoresponsive conducting polymer

Novel approach to the synthesis of core–shell particles by sacrificial polymer shell method

On-line pH Measurements of Near-Neutral Solutions by a Disposable Polymer Based Probe

Organic–Inorganic Hybrid Coatings for the Modification of Barrier Properties of Poly(lactic acid) Films for Food Packaging Applications

Past, present and future ultrasonographic techniques for analyzing ovarian masses.

artículo científico

Perfluoropolyether-Silica Hybrids: Preparation and Surface Characterization

Perfluoropolyether-based organic-inorganic hybrid coatings: Preparation and surface characterisation

Perfluoropolyether-based organic–inorganic coatings

Perfluoropolyether-based organic–inorganic hybrid coatings

Photobleaching effects in organic thin film sensing probes

Poly(ethylene oxide)–silica hybrids entrapping sensitive dyes for biomedical optical pH sensors: Molecular dynamics and optical response

Poly(hydroxyalkanoate)s meet benign solvents for electrospinning

artículo científico publicado en 2020

Poly(vinyl alcohol)-based film potentially suitable for antimicrobial packaging applications

artículo científico publicado en 2014

Polycarbonate reinforced with silica nanoparticles

Porous scaffolds of polycaprolactone reinforced with in situ generated hydroxyapatite for bone tissue engineering

artículo científico publicado en 2009

Preparation and characterization of poly (butylene terephthalate)/graphene composites by in-situ polymerization of cyclic butylene terephthalate

Prevention of plasticizer leaching from PVC medical devices by using organic–inorganic hybrid coatings

Production of Bioglass® 45S5 – Polycaprolactone composite scaffolds via salt-leaching

article

Radiofrequency plasma assisted exfoliation and reduction of large-area graphene oxide platelets produced by a mechanical transfer process

Reactions of cellulose and wood superficial hydroxy groups with organometallic compounds

Reproducibility of the International Endometrial Analysis Group Color Score for Assigning the Amount of Flow Within the Endometrium Using Stored 3-Dimensional Volumes

artículo científico publicado en 2017

SYNTHESIS OF PHOTOLUMINESCENT CORE-SHELL SILICA PARTICLES BY SACRIFICIAL POLYMER SHELL METHOD

Scratch resistance of nano-silica reinforced acrylic coatings

scholarly article by Ezio Amerio et al published April 2008 in Progress in Organic Coatings

Shape Memory Properties of PBS-Silica Hybrids

artículo científico publicado en 2014

Solvent and Substrate Contributions to the Formation of Breath Figure Patterns in Polystyrene Films

artículo científico publicado en 2011

Sol–gel derived hybrid coatings for the improvement of scratch resistance of polyethylene

Surface properties of fluorinated hybrid coatings

Synthesis of Suitable SiO2 Nano Particles as the Core in Core–Shell Nanostructured Materials

artículo científico publicado en 2011

The role of biotechnology in the transition from plastics to bioplastics: an opportunity to reconnect global growth with sustainability

artículo científico publicado en 2021

Titanium and zirconium hard coatings on glass substrates prepared by the sol–gel method

scholarly article by Paolo Zurlini et al published August 2009 in Thin Solid Films

Transparent and Conductive Graphene Oxide/Poly(ethylene glycol) diacrylate Coatings Obtained by Photopolymerization

Two-Step Solvent-Free Synthesis of Poly(hydroxybutyrate)-Based Photocurable Resin with Potential Application in Stereolithography

artículo científico publicado en 2020

Lista de obras de Paola Fabbri

45S5 Bioglass®-derived scaffolds coated with organic–inorganic hybrids containing graphene

Anti-scratch and adhesion properties of photo-curable polymer/clay nanocomposite coatings based on methacrylate monomers

Bentonite-based organoclays as innovative flame retardants agents for SBS copolymer

Carbon Nanotubes/Regenerated Silk Composite as a Three-Dimensional Printable Bio-Adhesive Ink with Self-Powering Properties

Cohesive and adhesive properties of polycaprolactone/silica hybrid coatings on poly(methyl methacrylate) substrates

Construction and evaluation of a disposable pH sensor based on a large core plastic optical fiber

Continuous haematic pH monitoring in extracorporeal circulation using a disposable florescence sensing element

Design of surface properties of PET films: Effect of fluorinated block copolymers

Development of a low-cost pH sensor based on plastic optical fibers

Disposable fluorescence optical pH sensor for near neutral solutions

Electrical behavior of PET films coated with nanostructured organic–inorganic hybrids

Enhancing the scratch resistance of polycarbonate with poly(ethylene oxide)-silica hybrid coatings

Facile method based on 19F-NMR for the determination of hydroxyl value and molecular weight of hydroxyl terminated polymers

Flame retarding poly(methyl methacrylate) with nanostructured organic–inorganic hybrids coatings

Functionally modified core-shell silica nanoparticles by one-pot synthesis

Haematic pH sensor for extracorporeal circulation

High-density polyethylene reinforced with submicron titania particles

Highly luminescent yttria–silica core–shell nanoparticles by the sacrificial polymer shell method

Highly porous polycaprolactone-45S5 Bioglass® scaffolds for bone tissue engineering

Highly stable plastic optical fibre amplifiers containing [Eu(btfa)3(MeOH)(bpeta)]: A luminophore able to drive the synthesis of polyisocyanates

Hydrophobic and oleophobic coatings based on perfluoropolyether/silica hybrids by the sol-gel method

Improvement of the surface properties of polycarbonate by organic–inorganic hybrid coatings

Improving the creep stability of high-density polyethylene with acicular titania nanoparticles

In-situ graphene oxide reduction during UV-photopolymerization of graphene oxide/acrylic resins mixtures

Modification of EVOH copolymers withε-caprolactone: synthesis and compatibilization effects in PE/PVC blends

Modification of PET by reactive blending with sulfonated esters, 1. Synthesis and characterization of PET-ionomers

Modification of cellulose fibres with organosilanes: Under what conditions does coupling occur?

Monitoring of the Sol-Gel Synthesis of Organic-inorganic Hybrids by FTIR Transmission, FTIR/ATR, NIR and Raman Spectroscopy

Multilayer films composed of conductive poly(3-hydroxybutyrate)/carbon nanotubes bionanocomposites and a photoresponsive conducting polymer

Novel approach to the synthesis of core–shell particles by sacrificial polymer shell method

On-line pH Measurements of Near-Neutral Solutions by a Disposable Polymer Based Probe

Organic–Inorganic Hybrid Coatings for the Modification of Barrier Properties of Poly(lactic acid) Films for Food Packaging Applications

Past, present and future ultrasonographic techniques for analyzing ovarian masses.

Perfluoropolyether-Silica Hybrids: Preparation and Surface Characterization

Perfluoropolyether-based organic-inorganic hybrid coatings: Preparation and surface characterisation

Perfluoropolyether-based organic–inorganic coatings

Perfluoropolyether-based organic–inorganic hybrid coatings

Photobleaching effects in organic thin film sensing probes

Poly(ethylene oxide)–silica hybrids entrapping sensitive dyes for biomedical optical pH sensors: Molecular dynamics and optical response

Poly(hydroxyalkanoate)s meet benign solvents for electrospinning

Poly(vinyl alcohol)-based film potentially suitable for antimicrobial packaging applications

Polycarbonate reinforced with silica nanoparticles

Porous scaffolds of polycaprolactone reinforced with in situ generated hydroxyapatite for bone tissue engineering

Preparation and characterization of poly (butylene terephthalate)/graphene composites by in-situ polymerization of cyclic butylene terephthalate

Prevention of plasticizer leaching from PVC medical devices by using organic–inorganic hybrid coatings

Production of Bioglass® 45S5 – Polycaprolactone composite scaffolds via salt-leaching

Radiofrequency plasma assisted exfoliation and reduction of large-area graphene oxide platelets produced by a mechanical transfer process

Reactions of cellulose and wood superficial hydroxy groups with organometallic compounds

Reproducibility of the International Endometrial Analysis Group Color Score for Assigning the Amount of Flow Within the Endometrium Using Stored 3-Dimensional Volumes

SYNTHESIS OF PHOTOLUMINESCENT CORE-SHELL SILICA PARTICLES BY SACRIFICIAL POLYMER SHELL METHOD

Scratch resistance of nano-silica reinforced acrylic coatings

Shape Memory Properties of PBS-Silica Hybrids

Solvent and Substrate Contributions to the Formation of Breath Figure Patterns in Polystyrene Films

Sol–gel derived hybrid coatings for the improvement of scratch resistance of polyethylene

Surface properties of fluorinated hybrid coatings

Synthesis of Suitable SiO2 Nano Particles as the Core in Core–Shell Nanostructured Materials

The role of biotechnology in the transition from plastics to bioplastics: an opportunity to reconnect global growth with sustainability

Titanium and zirconium hard coatings on glass substrates prepared by the sol–gel method

Transparent and Conductive Graphene Oxide/Poly(ethylene glycol) diacrylate Coatings Obtained by Photopolymerization

Two-Step Solvent-Free Synthesis of Poly(hydroxybutyrate)-Based Photocurable Resin with Potential Application in Stereolithography

UV Curing of Organic-Inorganic Hybrid Coatings Containing Polyhedral Oligomeric Silsesquioxane Blocks