Lista de obras - Rosanne M. Guijt - Dominio Público Uruguay

3D Printing: An Alternative Microfabrication Approach with Unprecedented Opportunities in Design

scientific article published on 02 December 2020

3D printed LED based on-capillary detector housing with integrated slit

artículo científico publicado en 2017

3D printed microfluidic devices: enablers and barriers

artículo científico publicado en 2016

Academic parenting: work–family conflict and strategies across child age, disciplines and career level

Analytical isotachophoresis of lactate in human serum using dry film photoresist microfluidic chips compatible with a commercially available field-deployable instrument platform

artículo científico publicado en 2013

Capillary electrophoresis for automated on-line monitoring of suspension cultures: Correlating cell density, nutrients and metabolites in near real-time

artículo científico publicado en 2016

Capillary electrophoresis for monitoring bioprocesses

artículo científico

Capillary electrophoresis for the analysis of paralytic shellfish poisoning toxins in shellfish: Comparison of detection methods

Capillary electrophoresis with on-chip four-electrode capacitively coupled conductivity detection for application in bioanalysis

artículo científico publicado en 2001

Chemical and physical processes for integrated temperature control in microfluidic devices

artículo científico publicado en 2002

Colour tuning and enhancement of gel-based electrochemiluminescence devices utilising Ru(ii) and Ir(iii) complexes

scientific article published on 06 September 2019

Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms.

artículo científico publicado en 2017

Considerations on contactless conductivity detection in capillary electrophoresis

artículo científico publicado en 2002

Cost-effective three-dimensional printing of visibly transparent microchips within minutes.

artículo científico publicado en 2014

Counter-flow electrokinetic supercharging for the determination of non-steroidal anti-inflammatory drugs in water samples

artículo científico publicado en 2009

Counter-pressure-assisted ITP with electrokinetic injection under field-amplified conditions for bacterial analysis

artículo científico publicado en 2015

Determination of inorganic ions using microfluidic devices

artículo científico publicado en 2004

Determination of the surface heat-transfer coefficient in CE.

artículo científico publicado en 2009

Direct coupling of a free-flow isotachophoresis (FFITP) device with electrospray ionization mass spectrometry (ESI-MS).

artículo científico publicado en 2015

Direct electrokinetic injection of inorganic cations from whole fruits and vegetables for capillary electrophoresis analysis.

artículo científico publicado en 2015

Droplet Microfluidics for Postcolumn Reactions in Capillary Electrophoresis

scientific article published on 11 November 2014

Dry film microchips for miniaturised separations

artículo científico publicado en 2009

Dual wavelength excitation fluorescence detector for capillary electrophoresis using a pulsed bi-colour light emitting diode

artículo científico publicado en 2011

Electric field gradient focusing using a variable width polyaniline electrode

artículo científico publicado en 2012

Electrokinetic Size and Mobility Traps for On-site Therapeutic Drug Monitoring

artículo científico publicado en 2015

Electrokinetic supercharging for on-line preconcentration of seven non-steroidal anti-inflammatory drugs in water samples

artículo científico publicado en 2007

Electrokinetic supercharging-electrospray ionisation-mass spectrometry for separation and on-line preconcentration of hypolipidaemic drugs in water samples

artículo científico publicado en 2010

Electrokinetics for sample preparation of biological molecules in biological samples using microfluidic systems

artículo científico publicado en 2014

Electrophoretic separations on paper: Past, present, and future-A review

artículo científico

Evaluation of potential cationic probes for the detection of proline and betaine

artículo científico publicado en 2014

Exploring chip-capillary electrophoresis-laser-induced fluorescence field-deployable platform flexibility: separations of fluorescent dyes by chip-based non-aqueous capillary electrophoresis

artículo científico publicado en 2013

Fabrication of a glass-implemented microcapillary electrophoresis device with integrated contactless conductivity detection

artículo científico publicado en 2002

Flow injection analysis of organic peroxide explosives using acid degradation and chemiluminescent detection of released hydrogen peroxide

artículo científico publicado en 2015

High intensity light emitting diode array as an alternative exposure source for the fabrication of electrophoretic microfluidic devices

artículo científico publicado en 2008

Identification of homemade inorganic explosives by ion chromatographic analysis of post-blast residues.

artículo científico publicado en 2008

Identification of inorganic improvised explosive devices by analysis of postblast residues using portable capillary electrophoresis instrumentation and indirect photometric detection with a light-emitting diode.

artículo científico publicado en 2007

Identification of inorganic ions in post-blast explosive residues using portable CE instrumentation and capacitively coupled contactless conductivity detection

artículo científico publicado en 2008

In-Syringe Electrokinetic Ampholytes Focusing Coupled with Electrospray Ionization Mass Spectrometry

scientific article published on 19 June 2019

In-Transit Electroextraction of Small-Molecule Pharmaceuticals from Blood

scientific article published on 12 February 2019

In-plane alloy electrodes for capacitively coupled contactless conductivity detection in poly(methylmethacrylate) electrophoretic chips

artículo científico publicado en 2013

Increasing the functionalities of 3D printed microchemical devices by single material, multimaterial, and print-pause-print 3D printing

artículo científico publicado en 2018

Indirect Electro-Osmotic Pumping

article by Rosanne M. Guijt published 1 June 2002 in Journal of the Association for Laboratory Automation

Internal electrolyte temperatures for polymer and fused-silica capillaries used in capillary electrophoresis

artículo científico publicado en 2005

Ion transport in broad bean leaf mesophyll under saline conditions.

artículo científico publicado en 2014

Isotachophoresis on a chip with indirect fluorescence detection as a field deployable system for analysis of carboxylic acids

artículo científico publicado en 2012

Isotachophoretic Fluorescence in Situ Hybridization of Intact Bacterial Cells

artículo científico publicado en 2017

Lab-on-a-Chip device with laser-patterned polymer electrodes for high voltage application and contactless conductivity detection

artículo científico publicado en 2012

Manufacturing and application of a fully polymeric electrophoresis chip with integrated polyaniline electrodes

artículo científico publicado en 2010

Maskless photolithography using UV LEDs

artículo científico publicado en 2008

Micellar electrokinetic chromatography of organic and peroxide-based explosives

scientific article published on 30 March 2015

Microfluidic isotachophoresis: a review

artículo científico

Mild and repetitive very mild axonal stretch injury triggers cystoskeletal mislocalization and growth cone collapse

artículo científico publicado en 2017

Multimaterial 3D Printed Fluidic Device for Measuring Pharmaceuticals in Biological Fluids

artículo científico publicado en 2018

Nanoporous Membranes for Microfluidic Concentration Prior to Electrophoretic Separation of Proteins in Urine

artículo científico publicado en 2016

New approaches for fabrication of microfluidic capillary electrophoresis devices with on-chip conductivity detection

artículo científico publicado en 2001

On-chip contactless four-electrode conductivity detection for capillary electrophoresis devices

artículo científico publicado en 2003

On-line sequential injection-capillary electrophoresis for near-real-time monitoring of extracellular lactate in cell culture flasks

artículo científico publicado en 2013

On-line simultaneous and rapid separation of anions and cations from a single sample using dual-capillary sequential injection-capillary electrophoresis

scientific article published on 26 March 2013

One step multi-material 3D printing for the fabrication of a photometric detector flow cell

scientific article published on 08 November 2019

One-Step Fabrication of a Microfluidic Device with an Integrated Membrane and Embedded Reagents by Multimaterial 3D Printing.

artículo científico publicado en 2017

Polymeric microchip for the simultaneous determination of anions and cations by hydrodynamic injection using a dual-channel sequential injection microchip electrophoresis system.

artículo científico publicado en 2014

Potassium retention in leaf mesophyll as an element of salinity tissue tolerance in halophytes

artículo científico publicado en 2016

Pressure-assisted electrokinetic supercharging for the enhancement of non-steroidal anti-inflammatory drugs

artículo científico publicado en 2011

Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2006-2008).

artículo científico publicado en 2009

Reliable electrophoretic mobilities free from Joule heating effects using CE.

artículo científico publicado en 2007

Separation of carboxylic acids in human serum by isotachophoresis using a commercial field-deployable analytical platform combined with in-house glass microfluidic chips

artículo científico publicado en 2012

Stainless steel pinholes for fast fabrication of high-performance microchip electrophoresis devices by CO2 laser ablation

artículo científico publicado en 2013

Strategies for the on-line preconcentration and separation of hypolipidaemic drugs using micellar electrokinetic chromatography.

artículo científico publicado en 2009

Temperature profiles and heat dissipation in capillary electrophoresis

artículo científico publicado en 2006

The role of gratitude in enhancing the relationship between doctoral research students and their supervisors

Time-Resolved Pharmacological Studies using Automated, On-line Monitoring of Five Parallel Suspension Cultures

artículo científico publicado en 2017

Transient isotachophoresis-capillary zone electrophoresis with contactless conductivity and ultraviolet detection for the analysis of paralytic shellfish toxins in mussel samples

artículo científico publicado en 2014

Tuneable nanochannel formation for sample-in/answer-out devices

Using Printing Orientation for Tuning Fluidic Behavior in Microfluidic Chips Made by Fused Deposition Modeling 3D Printing.

artículo científico publicado en 2017

Van de Graaff generator for capillary electrophoresis ⬇️

artículo científico publicado en 2017

Variation of zeta-potential with temperature in fused-silica capillaries used for capillary electrophoresis.

artículo científico publicado en 2006

Versatile electrophoresis-based self-test platform

artículo científico publicado en 2015

Lista de obras de Rosanne M. Guijt

3D Printing: An Alternative Microfabrication Approach with Unprecedented Opportunities in Design

3D printed LED based on-capillary detector housing with integrated slit

3D printed microfluidic devices: enablers and barriers

Academic parenting: work–family conflict and strategies across child age, disciplines and career level

Analytical isotachophoresis of lactate in human serum using dry film photoresist microfluidic chips compatible with a commercially available field-deployable instrument platform

Capillary electrophoresis for automated on-line monitoring of suspension cultures: Correlating cell density, nutrients and metabolites in near real-time

Capillary electrophoresis for monitoring bioprocesses

Capillary electrophoresis for the analysis of paralytic shellfish poisoning toxins in shellfish: Comparison of detection methods

Capillary electrophoresis with on-chip four-electrode capacitively coupled conductivity detection for application in bioanalysis

Chemical and physical processes for integrated temperature control in microfluidic devices

Colour tuning and enhancement of gel-based electrochemiluminescence devices utilising Ru(ii) and Ir(iii) complexes

Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms.

Considerations on contactless conductivity detection in capillary electrophoresis

Cost-effective three-dimensional printing of visibly transparent microchips within minutes.

Counter-flow electrokinetic supercharging for the determination of non-steroidal anti-inflammatory drugs in water samples

Counter-pressure-assisted ITP with electrokinetic injection under field-amplified conditions for bacterial analysis

Determination of inorganic ions using microfluidic devices

Determination of the surface heat-transfer coefficient in CE.

Direct coupling of a free-flow isotachophoresis (FFITP) device with electrospray ionization mass spectrometry (ESI-MS).

Direct electrokinetic injection of inorganic cations from whole fruits and vegetables for capillary electrophoresis analysis.

Droplet Microfluidics for Postcolumn Reactions in Capillary Electrophoresis

Dry film microchips for miniaturised separations

Dual wavelength excitation fluorescence detector for capillary electrophoresis using a pulsed bi-colour light emitting diode

Electric field gradient focusing using a variable width polyaniline electrode

Electrokinetic Size and Mobility Traps for On-site Therapeutic Drug Monitoring

Electrokinetic supercharging for on-line preconcentration of seven non-steroidal anti-inflammatory drugs in water samples

Electrokinetic supercharging-electrospray ionisation-mass spectrometry for separation and on-line preconcentration of hypolipidaemic drugs in water samples

Electrokinetics for sample preparation of biological molecules in biological samples using microfluidic systems

Electrophoretic separations on paper: Past, present, and future-A review

Evaluation of potential cationic probes for the detection of proline and betaine

Exploring chip-capillary electrophoresis-laser-induced fluorescence field-deployable platform flexibility: separations of fluorescent dyes by chip-based non-aqueous capillary electrophoresis

Fabrication of a glass-implemented microcapillary electrophoresis device with integrated contactless conductivity detection

Flow injection analysis of organic peroxide explosives using acid degradation and chemiluminescent detection of released hydrogen peroxide

High intensity light emitting diode array as an alternative exposure source for the fabrication of electrophoretic microfluidic devices

Identification of homemade inorganic explosives by ion chromatographic analysis of post-blast residues.

Identification of inorganic improvised explosive devices by analysis of postblast residues using portable capillary electrophoresis instrumentation and indirect photometric detection with a light-emitting diode.

Identification of inorganic ions in post-blast explosive residues using portable CE instrumentation and capacitively coupled contactless conductivity detection

In-Syringe Electrokinetic Ampholytes Focusing Coupled with Electrospray Ionization Mass Spectrometry

In-Transit Electroextraction of Small-Molecule Pharmaceuticals from Blood

In-plane alloy electrodes for capacitively coupled contactless conductivity detection in poly(methylmethacrylate) electrophoretic chips

Increasing the functionalities of 3D printed microchemical devices by single material, multimaterial, and print-pause-print 3D printing

Indirect Electro-Osmotic Pumping

Internal electrolyte temperatures for polymer and fused-silica capillaries used in capillary electrophoresis

Ion transport in broad bean leaf mesophyll under saline conditions.

Isotachophoresis on a chip with indirect fluorescence detection as a field deployable system for analysis of carboxylic acids

Isotachophoretic Fluorescence in Situ Hybridization of Intact Bacterial Cells

Lab-on-a-Chip device with laser-patterned polymer electrodes for high voltage application and contactless conductivity detection

Manufacturing and application of a fully polymeric electrophoresis chip with integrated polyaniline electrodes

Maskless photolithography using UV LEDs

Micellar electrokinetic chromatography of organic and peroxide-based explosives

Microfluidic isotachophoresis: a review

Mild and repetitive very mild axonal stretch injury triggers cystoskeletal mislocalization and growth cone collapse

Multimaterial 3D Printed Fluidic Device for Measuring Pharmaceuticals in Biological Fluids

Nanoporous Membranes for Microfluidic Concentration Prior to Electrophoretic Separation of Proteins in Urine

New approaches for fabrication of microfluidic capillary electrophoresis devices with on-chip conductivity detection

On-chip contactless four-electrode conductivity detection for capillary electrophoresis devices

On-line sequential injection-capillary electrophoresis for near-real-time monitoring of extracellular lactate in cell culture flasks

On-line simultaneous and rapid separation of anions and cations from a single sample using dual-capillary sequential injection-capillary electrophoresis

One step multi-material 3D printing for the fabrication of a photometric detector flow cell

One-Step Fabrication of a Microfluidic Device with an Integrated Membrane and Embedded Reagents by Multimaterial 3D Printing.

Polymeric microchip for the simultaneous determination of anions and cations by hydrodynamic injection using a dual-channel sequential injection microchip electrophoresis system.

Potassium retention in leaf mesophyll as an element of salinity tissue tolerance in halophytes

Pressure-assisted electrokinetic supercharging for the enhancement of non-steroidal anti-inflammatory drugs

Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2006-2008).

Reliable electrophoretic mobilities free from Joule heating effects using CE.

Separation of carboxylic acids in human serum by isotachophoresis using a commercial field-deployable analytical platform combined with in-house glass microfluidic chips

Stainless steel pinholes for fast fabrication of high-performance microchip electrophoresis devices by CO2 laser ablation

Strategies for the on-line preconcentration and separation of hypolipidaemic drugs using micellar electrokinetic chromatography.

Temperature profiles and heat dissipation in capillary electrophoresis

The role of gratitude in enhancing the relationship between doctoral research students and their supervisors

Time-Resolved Pharmacological Studies using Automated, On-line Monitoring of Five Parallel Suspension Cultures

Transient isotachophoresis-capillary zone electrophoresis with contactless conductivity and ultraviolet detection for the analysis of paralytic shellfish toxins in mussel samples

Tuneable nanochannel formation for sample-in/answer-out devices

Using Printing Orientation for Tuning Fluidic Behavior in Microfluidic Chips Made by Fused Deposition Modeling 3D Printing.

Van de Graaff generator for capillary electrophoresis ⬇️

Variation of zeta-potential with temperature in fused-silica capillaries used for capillary electrophoresis.

Versatile electrophoresis-based self-test platform