Lista de obras - Américo B Correr - Dominio Público Uruguay

Bonding orthodontics brackets to enamel using experimental composites with an iodonium salt

artículo científico publicado en 2013

Bonding performance of experimental bioactive/biomimetic self-etch adhesives doped with calcium-phosphate fillers and biomimetic analogs of phosphoproteins

artículo científico publicado en 2016

Can the hydrophilicity of functional monomers affect chemical interaction?

artículo científico publicado en 2013

Chemical interaction of 10-MDP (methacryloyloxi-decyl-dihydrogen-phosphate) in zinc-doped self-etch adhesives

artículo científico publicado en 2014

Clinical evaluation of the failure rates of metallic brackets.

scientific article published on March 2012

Color Stability and Gloss of Esthetic Restorative Materials after Chemical Challenges

scientific article published on 01 January 2019

Correlation between bond strength and nanomechanical properties of adhesive interface.

artículo científico publicado en 2016

Deflection and Flexural Strength Effects on the Roughness of Aesthetic-Coated Orthodontic Wires.

artículo científico publicado en 2017

Degradation of Adhesive-Dentin Interfaces Created Using Different Bonding Strategies after Five-year Simulated Pulpal Pressure

artículo científico publicado en 2019

Dimensional Change of Elastomeric Materials after Immersion in Disinfectant Solutions for Different Times ⬇️

artículo científico publicado el 1 de julio de 2011

Effect of Acid Etching, Silane and Thermal Cycling on the Bond Strength of Metallic Brackets to Ceramic.

artículo científico publicado en 2016

Effect of Beam Profiles From Different Light Emission Tip Types of Multiwave Light-emitting Diodes on the Curing Profile of Resin-based Composites

artículo científico publicado en 2019

Effect of Hydrofluoric Acid Concentration and Etching Time on Bond Strength to Lithium Disilicate Glass Ceramic

artículo científico

Effect of Hydrofluoric Acid Concentration and Thermal Cycling on the Bond Strength of Brackets to Ceramic

artículo científico publicado en 2019

Effect of Polymerization Cycles on Gloss, Roughness, Hardness and Impact Strength of Acrylic Resins

artículo científico publicado en 2016

Effect of a new method to simulate pulpal pressure on bond strength and nanoleakage of dental adhesives to dentin

artículo científico publicado en 2012

Effect of activation mode on shear bond strength of metallic brackets.

artículo científico publicado en 2013

Effect of adhesive remnant removal on enamel topography after bracket debonding

artículo científico publicado en 2014

Effect of antioxidants on the dentin interface bond stability of adhesives exposed to hydrolytic degradation.

artículo científico publicado en 2015

Effect of bar cross-section geometry on stress distribution in overdenture-retaining system simulating horizontal misfit and bone loss

artículo científico publicado en 2013

Effect of bonding material, etching time and silane on the bond strength of metallic orthodontic brackets to ceramic.

artículo científico publicado en 2012

Effect of composite containing an iodonium salt on the bond strength of brackets to bovine enamel.

artículo científico publicado en 2014

Effect of different photoinitiators and reducing agents on cure efficiency and color stability of resin-based composites using different LED wavelengths

artículo científico publicado en 2015

Effect of etching time and light source on the bond strength of metallic brackets to ceramic.

artículo científico publicado en 2011

Effect of light-curing method and cement activation mode on resin cement knoop hardness

artículo científico publicado en 2007

Effects of different photo-polymerization protocols on resin-dentine μTBS, mechanical properties and cross-link density of a nano-filled resin composite.

artículo científico publicado en 2012

Effects of surface treatments, thermocycling, and cyclic loading on the bond strength of a resin cement bonded to a lithium disilicate glass ceramic.

artículo científico publicado en 2012

Evaluation of contraction stress, conversion degree, and cross-link density in low-shrinkage composites

artículo científico publicado en 2014

Evaluation of the micro-mechanical strength of resin bonded–dentin interfaces submitted to short-term degradation strategies

artículo científico publicado en 2012

Halogen and LED light curing of composite: temperature increase and Knoop hardness

artículo científico publicado en 2006

Hydrolytic degradation of the resin-dentine interface induced by the simulated pulpal pressure, direct and indirect water ageing

artículo científico publicado en 2012

Impact of hydrophilicity and length of spacer chains on the bonding of functional monomers

artículo científico publicado en 2014

In-depth polymerization of dual-cured resin cement assessed by hardness.

artículo científico publicado en 2008

In-vivo evaluation of the surface roughness and morphology of enamel after bracket removal and polishing by different techniques.

artículo científico publicado en 2015

Influence of Light Source, Thermocycling and Silane on the Shear Bond Strength of Metallic Brackets to Ceramic

artículo científico publicado en 2015

Influence of Thermal Cycles Number on Bond Strength of Metallic Brackets to Ceramic.

artículo científico publicado en 2017

Influence of Water Storage and Bonding Material on Bond Strength of Metallic Brackets to Ceramic.

artículo científico publicado en 2015

Influence of bioactive particles on the chemical-mechanical properties of experimental enamel resin infiltrants

artículo científico publicado en 2016

Influence of nanogel additive hydrophilicity on dental adhesive mechanical performance and dentin bonding.

artículo científico publicado en 2016

Inorganic particle analysis of dental impression elastomers.

artículo científico publicado en 2010

Light Activation and Thermocycling Methods on the Shear Bond Strength of Brackets Bonded to Porcelain Surfaces

artículo científico publicado en 2020

Light-emitting Diode Beam Profile and Spectral Output Influence on the Degree of Conversion of Bulk Fill Composites.

artículo científico publicado en 2017

Luting glass ceramic restorations using a self-adhesive resin cement under different dentin conditions

artículo científico publicado en 2010

Physical-Mechanical Properties of Bulk Fill Composites Submitted to Biodegradation by Streptococcus mutans

artículo científico publicado en 2020

Prolonged curing time reduces the effects of simulated pulpal pressure on the bond strength of one-step self-etch adhesives

artículo científico publicado en 2012

Solubility and dimensional change after setting of root canal sealers: a proposal for smaller dimensions of test samples

artículo científico publicado en 2007

Spectrophotometric evaluation of dental bleaching under orthodontic bracket in enamel and dentin

artículo científico publicado en 2014

The Combination of CQ-amine and TPO Increases the Polymerization Shrinkage Stress and Does Not Improve the Depth of Cure of Bulk-fill Composites

artículo científico publicado en 2019

The Effect of Hydrofluoric Acid Concentration on the Bond Strength and Morphology of the Surface and Interface of Glass Ceramics to a Resin Cement.

artículo científico publicado en 2015

The effect of combining photoinitiator systems on the color and curing profile of resin-based composites.

artículo científico publicado en 2016

The role of spacer carbon chain in acidic functional monomers on the physicochemical properties of self-etch dental adhesives

artículo científico publicado en 2014

Two methods to simulate intrapulpal pressure: effects upon bonding performance of self-etch adhesives

artículo científico publicado en 2014

Lista de obras de Américo B Correr

Bonding orthodontics brackets to enamel using experimental composites with an iodonium salt

Bonding performance of experimental bioactive/biomimetic self-etch adhesives doped with calcium-phosphate fillers and biomimetic analogs of phosphoproteins

Can the hydrophilicity of functional monomers affect chemical interaction?

Chemical interaction of 10-MDP (methacryloyloxi-decyl-dihydrogen-phosphate) in zinc-doped self-etch adhesives

Clinical evaluation of the failure rates of metallic brackets.

Color Stability and Gloss of Esthetic Restorative Materials after Chemical Challenges

Correlation between bond strength and nanomechanical properties of adhesive interface.

Deflection and Flexural Strength Effects on the Roughness of Aesthetic-Coated Orthodontic Wires.

Degradation of Adhesive-Dentin Interfaces Created Using Different Bonding Strategies after Five-year Simulated Pulpal Pressure

Dimensional Change of Elastomeric Materials after Immersion in Disinfectant Solutions for Different Times ⬇️

Effect of Acid Etching, Silane and Thermal Cycling on the Bond Strength of Metallic Brackets to Ceramic.

Effect of Beam Profiles From Different Light Emission Tip Types of Multiwave Light-emitting Diodes on the Curing Profile of Resin-based Composites

Effect of Hydrofluoric Acid Concentration and Etching Time on Bond Strength to Lithium Disilicate Glass Ceramic

Effect of Hydrofluoric Acid Concentration and Thermal Cycling on the Bond Strength of Brackets to Ceramic

Effect of Polymerization Cycles on Gloss, Roughness, Hardness and Impact Strength of Acrylic Resins

Effect of a new method to simulate pulpal pressure on bond strength and nanoleakage of dental adhesives to dentin

Effect of activation mode on shear bond strength of metallic brackets.

Effect of adhesive remnant removal on enamel topography after bracket debonding

Effect of antioxidants on the dentin interface bond stability of adhesives exposed to hydrolytic degradation.

Effect of bar cross-section geometry on stress distribution in overdenture-retaining system simulating horizontal misfit and bone loss

Effect of bonding material, etching time and silane on the bond strength of metallic orthodontic brackets to ceramic.

Effect of composite containing an iodonium salt on the bond strength of brackets to bovine enamel.

Effect of different photoinitiators and reducing agents on cure efficiency and color stability of resin-based composites using different LED wavelengths

Effect of etching time and light source on the bond strength of metallic brackets to ceramic.

Effect of light-curing method and cement activation mode on resin cement knoop hardness

Effects of different photo-polymerization protocols on resin-dentine μTBS, mechanical properties and cross-link density of a nano-filled resin composite.

Effects of surface treatments, thermocycling, and cyclic loading on the bond strength of a resin cement bonded to a lithium disilicate glass ceramic.

Evaluation of contraction stress, conversion degree, and cross-link density in low-shrinkage composites

Evaluation of the micro-mechanical strength of resin bonded–dentin interfaces submitted to short-term degradation strategies

Halogen and LED light curing of composite: temperature increase and Knoop hardness

Hydrolytic degradation of the resin-dentine interface induced by the simulated pulpal pressure, direct and indirect water ageing

Impact of hydrophilicity and length of spacer chains on the bonding of functional monomers

In-depth polymerization of dual-cured resin cement assessed by hardness.

In-vivo evaluation of the surface roughness and morphology of enamel after bracket removal and polishing by different techniques.

Influence of Light Source, Thermocycling and Silane on the Shear Bond Strength of Metallic Brackets to Ceramic

Influence of Thermal Cycles Number on Bond Strength of Metallic Brackets to Ceramic.

Influence of Water Storage and Bonding Material on Bond Strength of Metallic Brackets to Ceramic.

Influence of bioactive particles on the chemical-mechanical properties of experimental enamel resin infiltrants

Influence of nanogel additive hydrophilicity on dental adhesive mechanical performance and dentin bonding.

Inorganic particle analysis of dental impression elastomers.

Light Activation and Thermocycling Methods on the Shear Bond Strength of Brackets Bonded to Porcelain Surfaces

Light-emitting Diode Beam Profile and Spectral Output Influence on the Degree of Conversion of Bulk Fill Composites.

Luting glass ceramic restorations using a self-adhesive resin cement under different dentin conditions

Physical-Mechanical Properties of Bulk Fill Composites Submitted to Biodegradation by Streptococcus mutans

Prolonged curing time reduces the effects of simulated pulpal pressure on the bond strength of one-step self-etch adhesives

Solubility and dimensional change after setting of root canal sealers: a proposal for smaller dimensions of test samples

Spectrophotometric evaluation of dental bleaching under orthodontic bracket in enamel and dentin

The Combination of CQ-amine and TPO Increases the Polymerization Shrinkage Stress and Does Not Improve the Depth of Cure of Bulk-fill Composites

The Effect of Hydrofluoric Acid Concentration on the Bond Strength and Morphology of the Surface and Interface of Glass Ceramics to a Resin Cement.

The effect of combining photoinitiator systems on the color and curing profile of resin-based composites.

The role of spacer carbon chain in acidic functional monomers on the physicochemical properties of self-etch dental adhesives

Two methods to simulate intrapulpal pressure: effects upon bonding performance of self-etch adhesives