Lista de obras - Werner Schmoelz - Dominio Público Uruguay

A new distractable implant for vertebral body replacement: biomechanical testing of four implants for the thoracolumbar spine

artículo científico publicado en 2009

A pelvic fracture model for the assessment of treatment options in a laboratory environment

artículo científico publicado en 2007

Angular stable anterior plating following thoracolumbar corpectomy reveals superior segmental stability compared to conventional polyaxial plate fixation

artículo científico publicado en 2008

Augmented screws in angular stable plating of the proximal humerus: what to do when revision is needed?

artículo científico publicado en 2014

Biomechanical Comparison of 2 Anterior Cruciate Ligament Graft Preparation Techniques for Tibial Fixation: Response

artículo científico publicado en 2015

Biomechanical Study of a Novel, Expandable, Non-Metallic and Radiolucent CF/PEEK Vertebral Body Replacement (VBR)

scientific article published on 26 August 2019

Biomechanical analysis of a new expandable vertebral body replacement combined with a new polyaxial antero-lateral plate and/or pedicle screws and rods ⬇️

artículo científico publicado el 18 de octubre de 2011

Biomechanical analysis of anterior stabilization techniques for different partial and total vertebral corpectomy defect models

artículo científico publicado en 2012

Biomechanical comparison of 2 anterior cruciate ligament graft preparation techniques for tibial fixation: adjustable-length loop cortical button or interference screw.

artículo científico publicado en 2015

Biomechanical comparison of an angular stable plate with augmented and non-augmented screws in a newly developed shoulder test bench

artículo científico publicado en 2013

Biomechanical evaluation of a novel dynamic posterior cruciate ligament brace

artículo científico publicado en 2016

Biomechanical evaluation of a posterior non-fusion instrumentation of the lumbar spine

artículo científico publicado en 2011

Biomechanical evaluation of cable and suture cerclages for tuberosity reattachment in a 4-part proximal humeral fracture model treated with reverse shoulder arthroplasty

scholarly article by Dominik Knierzinger et al published October 2018 in Journal of Shoulder and Elbow Surgery

Biomechanical evaluation of straight antegrade nailing in proximal humeral fractures: the rationale of the "proximal anchoring point".

artículo científico publicado en 2017

Biomechanical in vitro comparison of suture anchors for thumb UCL repair.

artículo científico publicado en 2018

Biomechanical investigation of lumbar hybrid stabilization in two-level posterior instrumentation.

artículo científico publicado en 2017

Biomechanical performance of the new BeadEx implant in the treatment of osteoporotic vertebral body compression fractures: restoration and maintenance of height and stability.

artículo científico publicado en 2006

Biomechanical testing of rectangular humeral shaft prosthesis: higher torsional stability without increased fracture risk

artículo científico publicado en 2010

Biomechanische Studie über einen ventralen „stand alone cage“ für die lumbale Wirbelsäule mit oder ohne zusätzliche dorsale Stabilisation

artículo científico publicado en 2008

Cement augmentation in a thoracolumbar fracture model: reduction and stability after balloon kyphoplasty versus vertebral body stenting

artículo científico publicado en 2014

Cementless hemiarthroplasty in femoral neck fractures: evaluation of clinical results and measurement of migration by EBRA-FCA

artículo científico publicado en 2006

Clinical and biomechanical investigation of an increased articular cavity depth after distal radius fractures: effect on range of motion, osteoarthrosis and loading patterns

artículo científico publicado en 2013

Construct stability of an instrumented 2-level cervical corpectomy model following fatigue testing: biomechanical comparison of circumferential antero-posterior instrumentation versus a novel anterior-only transpedicular screw-plate fixation techniq

artículo científico publicado en 2015

Dynamic Stabilization of the Lumbar Spine and Its Effects on Adjacent Segments

artículo científico publicado en 2003

Effect of additional fixation in tibial plateau impression fractures treated with balloon reduction and cement augmentation

artículo científico publicado en 2015

Effect of augmentation techniques on the failure of pedicle screws under cranio-caudal cyclic loading

artículo científico publicado en 2015

Effect of cage design, supplemental posterior instrumentation and approach on primary stability of a lumbar interbody fusion - A biomechanical in vitro study.

artículo científico publicado en 2017

Effect of pedicle screw augmentation with a self-curing elastomeric material under cranio-caudal cyclic loading-a cadaveric biomechanical study

artículo científico publicado en 2018

Effects of multilevel posterior ligament dissection after spinal instrumentation on adjacent segment biomechanics as a potential risk factor for proximal junctional kyphosis: a biomechanical study.

artículo científico publicado en 2018

Effects of three different preservation methods on the mechanical properties of human and bovine cortical bone

artículo científico publicado en 2010

Erratum to: Effect of augmentation techniques on the failure of pedicle screws under cranio-caudal cyclic loading

artículo científico publicado en 2015

Extent of corpectomy determines primary stability following isolated anterior reconstruction in a thoracolumbar fracture model

article

Functional and radiographic evaluation of an interspinous device as an adjunct for lumbar interbody fusion procedures

artículo científico publicado en 2020

How does a novel knitted titanium nucleus prosthesis change the kinematics of a cervical spine segment? A biomechanical cadaveric study

scientific article published on 05 March 2019

In vitro stabilizing effect of a transforaminal compared with two posterior lumbar interbody fusion cages.

artículo científico publicado en 2005

Increased internal femoral torsion can be regarded as a risk factor for patellar instability - A biomechanical study.

artículo científico publicado en 2017

Intervertebrale Cages aus biomechanischer Sicht

artículo científico publicado en 2015

Is a gradual reduction of stiffness on top of posterior instrumentation possible with a suitable proximal implant? A biomechanical study

artículo científico publicado en 2017

Is augmentation a possible salvage procedure after lateral migration of the proximal femur nail antirotation?

artículo científico publicado en 2012

Isolated medial patellofemoral ligament reconstruction for patella instability is insufficient for higher degrees of internal femoral torsion

artículo científico publicado en 2018

Letter to the editor regarding “The quantity of bone cement influences the anchorage of augmented pedicle screws in the osteoporotic spine: A biomechanical human cadaveric study” by Pishnamaz M et al. Clin Biomech 2018;52:14–19

scholarly article by Charles Mengis et al published September 2018 in Clinical Biomechanics

Limited V-shaped cement augmentation of the proximal femur to prevent secondary hip fractures.

artículo científico publicado en 2012

Local osteo-enhancement of osteoporotic vertebra with a triphasic bone implant material increases strength-a biomechanical study

artículo científico publicado en 2020

Measurement of intraarticular wrist joint biomechanics with a force controlled system.

artículo científico publicado en 2011

Migration of two different cementless hip arthroplasty stems in combination with two different heads: a biomechanical in vitro study.

artículo científico publicado en 2006

Modified Lemaire tenodesis reduces anterior cruciate ligament graft forces during internal tibial torque loading

artículo científico publicado en 2022

Morphological similarities after compression trauma of bovine and human intervertebral discs: Do disc cells have a chance of surviving?

artículo científico publicado en 2014

Motion of the fibula relative to the tibia and its alterations with syndesmosis screws: A cadaver study

artículo científico publicado en 2011

Oncosurgical results of multilevel thoracolumbar en-bloc spondylectomy and reconstruction with a carbon composite vertebral body replacement system.

artículo científico publicado en 2011

Optimizing the grain size distribution of allografts in bone impaction grafting

artículo científico publicado en 2014

Pedicle screw anchorage of carbon fiber-reinforced PEEK screws under cyclic loading.

artículo científico publicado en 2018

Preparation techniques for all-inside ACL cortical button grafts: a biomechanical study.

artículo científico publicado en 2015

Primary stiffness of a modified transforaminal lumbar interbody fusion cage with integrated screw fixation: cadaveric biomechanical study

artículo científico publicado en 2014

Prophylactic augmentation of the proximal femur: an investigation of two techniques

artículo científico publicado en 2016

Resect or not to resect: the role of posterior longitudinal ligament in lumbar total disc replacement.

artículo científico publicado en 2009

Revision of cannulated and perforated cement-augmented pedicle screws: a biomechanical study in human cadavers.

artículo científico publicado en 2010

Screw oversizing for anterior cruciate ligament graft fixation in primary and enlarged tibial tunnels: A biomechanical study in a porcine model

scholarly article by Martin Eichinger et al published October 2018 in Knee

Shoulder joint abduction motion test bench: a new shoulder test bench for in vitro experiments with active muscle force simulation.

artículo científico publicado en 2012

Significant differences in femoral torsion values depending on the CT measurement technique.

artículo científico publicado en 2016

Simulation of fretting wear at orthopaedic implant interfaces

artículo científico publicado en 2005

Spinal Deformities and Advancement in Corrective Orthoses

artículo científico publicado en 2020

Suspensory Fixation of Grafts in Anterior Cruciate Ligament Reconstruction: A Biomechanical Comparison of 3 Implants

artículo científico publicado en 2009

The biomechanical effects of a deepened articular cavity during dynamic motion of the wrist joint.

artículo científico publicado en 2012

The effect of in situ augmentation on implant anchorage in proximal humeral head fractures

scientific article published on 21 July 2012

The influence of distal locking on the need for fibular plating in intramedullary nailing of distal metaphyseal tibiofibular fractures

artículo científico publicado en 2014

The mechanical stability of allografts after a cleaning process: comparison of two preparation modes.

artículo científico publicado en 2014

The medial periosteal hinge, a key structure in fractures of the proximal humerus: a biomechanical cadaver study of its mechanical properties.

artículo científico publicado en 2009

The role of prosthesis design on segmental biomechanics: semi-constrained versus unconstrained prostheses and anterior versus posterior centre of rotation

artículo científico publicado en 2010

The use of augmentation techniques in osteoporotic fracture fixation.

artículo científico publicado en 2016

Three-dimensional stiffness in a thoracolumbar en-bloc spondylectomy model: a biomechanical in vitro study.

artículo científico publicado en 2007

Timing of PMMA cement application for pedicle screw augmentation affects screw anchorage.

artículo científico publicado en 2017

Ultrasound melted polymer sleeve for improved primary pedicle screw anchorage: A novel augmentation technique

scientific article published on 14 February 2019

Ultrasound melted polymer sleeve for improved screw anchorage in trabecular bone--A novel screw augmentation technique

artículo científico publicado en 2016

Validation of a novel biomechanical test bench for the knee joint with six degrees of freedom

artículo científico publicado en 2017

Vertebroplasty With High-Viscosity Polymethylmethacrylate Cement Facilitates Vertebral Body Restoration In Vitro

artículo científico publicado en 2009

[Biomechanical aspects of complex reconstructions following radical resection of thoracolumbar spinal tumors].

artículo científico publicado en 2012

Lista de obras de Werner Schmoelz

A new distractable implant for vertebral body replacement: biomechanical testing of four implants for the thoracolumbar spine

A pelvic fracture model for the assessment of treatment options in a laboratory environment

Angular stable anterior plating following thoracolumbar corpectomy reveals superior segmental stability compared to conventional polyaxial plate fixation

Augmented screws in angular stable plating of the proximal humerus: what to do when revision is needed?

Biomechanical Comparison of 2 Anterior Cruciate Ligament Graft Preparation Techniques for Tibial Fixation: Response

Biomechanical Study of a Novel, Expandable, Non-Metallic and Radiolucent CF/PEEK Vertebral Body Replacement (VBR)

Biomechanical analysis of a new expandable vertebral body replacement combined with a new polyaxial antero-lateral plate and/or pedicle screws and rods ⬇️

Biomechanical analysis of anterior stabilization techniques for different partial and total vertebral corpectomy defect models

Biomechanical comparison of 2 anterior cruciate ligament graft preparation techniques for tibial fixation: adjustable-length loop cortical button or interference screw.

Biomechanical comparison of an angular stable plate with augmented and non-augmented screws in a newly developed shoulder test bench

Biomechanical evaluation of a novel dynamic posterior cruciate ligament brace

Biomechanical evaluation of a posterior non-fusion instrumentation of the lumbar spine

Biomechanical evaluation of cable and suture cerclages for tuberosity reattachment in a 4-part proximal humeral fracture model treated with reverse shoulder arthroplasty

Biomechanical evaluation of straight antegrade nailing in proximal humeral fractures: the rationale of the "proximal anchoring point".

Biomechanical in vitro comparison of suture anchors for thumb UCL repair.

Biomechanical investigation of lumbar hybrid stabilization in two-level posterior instrumentation.

Biomechanical performance of the new BeadEx implant in the treatment of osteoporotic vertebral body compression fractures: restoration and maintenance of height and stability.

Biomechanical testing of rectangular humeral shaft prosthesis: higher torsional stability without increased fracture risk

Biomechanische Studie über einen ventralen „stand alone cage“ für die lumbale Wirbelsäule mit oder ohne zusätzliche dorsale Stabilisation

Cement augmentation in a thoracolumbar fracture model: reduction and stability after balloon kyphoplasty versus vertebral body stenting

Cementless hemiarthroplasty in femoral neck fractures: evaluation of clinical results and measurement of migration by EBRA-FCA

Clinical and biomechanical investigation of an increased articular cavity depth after distal radius fractures: effect on range of motion, osteoarthrosis and loading patterns

Construct stability of an instrumented 2-level cervical corpectomy model following fatigue testing: biomechanical comparison of circumferential antero-posterior instrumentation versus a novel anterior-only transpedicular screw-plate fixation techniq

Dynamic Stabilization of the Lumbar Spine and Its Effects on Adjacent Segments

Effect of additional fixation in tibial plateau impression fractures treated with balloon reduction and cement augmentation

Effect of augmentation techniques on the failure of pedicle screws under cranio-caudal cyclic loading

Effect of cage design, supplemental posterior instrumentation and approach on primary stability of a lumbar interbody fusion - A biomechanical in vitro study.

Effect of pedicle screw augmentation with a self-curing elastomeric material under cranio-caudal cyclic loading-a cadaveric biomechanical study

Effects of multilevel posterior ligament dissection after spinal instrumentation on adjacent segment biomechanics as a potential risk factor for proximal junctional kyphosis: a biomechanical study.

Effects of three different preservation methods on the mechanical properties of human and bovine cortical bone

Erratum to: Effect of augmentation techniques on the failure of pedicle screws under cranio-caudal cyclic loading

Extent of corpectomy determines primary stability following isolated anterior reconstruction in a thoracolumbar fracture model

Functional and radiographic evaluation of an interspinous device as an adjunct for lumbar interbody fusion procedures

How does a novel knitted titanium nucleus prosthesis change the kinematics of a cervical spine segment? A biomechanical cadaveric study

In vitro stabilizing effect of a transforaminal compared with two posterior lumbar interbody fusion cages.

Increased internal femoral torsion can be regarded as a risk factor for patellar instability - A biomechanical study.

Intervertebrale Cages aus biomechanischer Sicht

Is a gradual reduction of stiffness on top of posterior instrumentation possible with a suitable proximal implant? A biomechanical study

Is augmentation a possible salvage procedure after lateral migration of the proximal femur nail antirotation?

Isolated medial patellofemoral ligament reconstruction for patella instability is insufficient for higher degrees of internal femoral torsion

Letter to the editor regarding “The quantity of bone cement influences the anchorage of augmented pedicle screws in the osteoporotic spine: A biomechanical human cadaveric study” by Pishnamaz M et al. Clin Biomech 2018;52:14–19

Limited V-shaped cement augmentation of the proximal femur to prevent secondary hip fractures.

Local osteo-enhancement of osteoporotic vertebra with a triphasic bone implant material increases strength-a biomechanical study

Measurement of intraarticular wrist joint biomechanics with a force controlled system.

Migration of two different cementless hip arthroplasty stems in combination with two different heads: a biomechanical in vitro study.

Modified Lemaire tenodesis reduces anterior cruciate ligament graft forces during internal tibial torque loading

Morphological similarities after compression trauma of bovine and human intervertebral discs: Do disc cells have a chance of surviving?

Motion of the fibula relative to the tibia and its alterations with syndesmosis screws: A cadaver study

Oncosurgical results of multilevel thoracolumbar en-bloc spondylectomy and reconstruction with a carbon composite vertebral body replacement system.

Optimizing the grain size distribution of allografts in bone impaction grafting

Pedicle screw anchorage of carbon fiber-reinforced PEEK screws under cyclic loading.

Preparation techniques for all-inside ACL cortical button grafts: a biomechanical study.

Primary stiffness of a modified transforaminal lumbar interbody fusion cage with integrated screw fixation: cadaveric biomechanical study

Prophylactic augmentation of the proximal femur: an investigation of two techniques

Resect or not to resect: the role of posterior longitudinal ligament in lumbar total disc replacement.

Revision of cannulated and perforated cement-augmented pedicle screws: a biomechanical study in human cadavers.

Screw oversizing for anterior cruciate ligament graft fixation in primary and enlarged tibial tunnels: A biomechanical study in a porcine model

Shoulder joint abduction motion test bench: a new shoulder test bench for in vitro experiments with active muscle force simulation.

Significant differences in femoral torsion values depending on the CT measurement technique.

Simulation of fretting wear at orthopaedic implant interfaces

Spinal Deformities and Advancement in Corrective Orthoses

Suspensory Fixation of Grafts in Anterior Cruciate Ligament Reconstruction: A Biomechanical Comparison of 3 Implants

The biomechanical effects of a deepened articular cavity during dynamic motion of the wrist joint.

The effect of in situ augmentation on implant anchorage in proximal humeral head fractures

The influence of distal locking on the need for fibular plating in intramedullary nailing of distal metaphyseal tibiofibular fractures

The mechanical stability of allografts after a cleaning process: comparison of two preparation modes.

The medial periosteal hinge, a key structure in fractures of the proximal humerus: a biomechanical cadaver study of its mechanical properties.

The role of prosthesis design on segmental biomechanics: semi-constrained versus unconstrained prostheses and anterior versus posterior centre of rotation

The use of augmentation techniques in osteoporotic fracture fixation.

Three-dimensional stiffness in a thoracolumbar en-bloc spondylectomy model: a biomechanical in vitro study.

Timing of PMMA cement application for pedicle screw augmentation affects screw anchorage.

Ultrasound melted polymer sleeve for improved primary pedicle screw anchorage: A novel augmentation technique

Ultrasound melted polymer sleeve for improved screw anchorage in trabecular bone--A novel screw augmentation technique

Validation of a novel biomechanical test bench for the knee joint with six degrees of freedom

Vertebroplasty With High-Viscosity Polymethylmethacrylate Cement Facilitates Vertebral Body Restoration In Vitro

[Biomechanical aspects of complex reconstructions following radical resection of thoracolumbar spinal tumors].