Lista de obras - Marwan El-Rich - Dominio Público Uruguay

A biomechanical study of L5-S1 low-grade isthmic spondylolisthesis using a personalized finite element model.

artículo científico publicado en 2006

A geometric approach to study the contact mechanisms in the patellofemoral joint of normal versus patellofemoral pain syndrome subjects.

artículo científico publicado en 2013

An in vitro study on the dimensional stability of a vinyl polyether silicone impression material over a prolonged storage period.

artículo científico publicado en 2013

Analysis of a generic talar prosthetic with a biological talus: A cadaver study

artículo científico publicado en 2018

Analysis of four methods of measuring three-dimensional pelvic tilt in the lateral decubitus position

artículo científico publicado en 2020

Assessment of torso deformities using 3D markerless asymmetry analysis and its clinical applications.

artículo científico publicado en 2013

Biomechanical response of intact, degenerated and repaired intervertebral discs under impact loading - Ex-vivo and In-Silico investigation.

artículo científico publicado en 2018

Calibration of hyperelastic material properties of the human lumbar intervertebral disc under fast dynamic compressive loads

artículo científico publicado en 2011

Characterizing asymmetry across the whole sit to stand movement in healthy participants

artículo científico publicado en 2013

Correlation Between a Novel Surface Topography Asymmetry Analysis and Radiographic Data in Scoliosis

artículo científico publicado en 2015

Development of a novel geometrically-parametric patient-specific finite element model to investigate the effects of the lumbar lordosis angle on fusion surgery

artículo científico publicado en 2020

Effect of load position on muscle forces, internal loads and stability of the human spine in upright postures

artículo científico publicado en 2005

Effects of eight different ligament property datasets on biomechanics of a lumbar L4-L5 finite element model.

artículo científico publicado en 2017

Effects of inter-individual lumbar spine geometry variation on load-sharing: Geometrically personalized Finite Element study

artículo científico publicado en 2016

Effects of lumbo-pelvic rhythm on trunk muscle forces and disc loads during forward flexion: A combined musculoskeletal and finite element simulation study

artículo científico publicado en 2018

Finite element analysis of mechanical behavior of human dysplastic hip joints: a systematic review

artículo científico publicado en 2016

Finite element investigation of the loading rate effect on the spinal load-sharing changes under impact conditions

artículo científico publicado en 2009

Geometric analysis of the talus and development of a generic talar prosthetic

artículo científico publicado en 2017

Injury mechanisms of the ligamentous cervical C2-C3 Functional Spinal Unit to complex loading modes: Finite Element study.

artículo científico publicado en 2015

Internal load-sharing in the human passive lumbar spine: Review of in vitro and finite element model studies

scientific article published on 22 October 2019

Investigation of impact loading rate effects on the ligamentous cervical spinal load-partitioning using finite element model of functional spinal unit C2-C3.

artículo científico publicado en 2014

Investigation of the geometries of the coronoid process and the fibular allograft as a potential surgical replacement

artículo científico publicado en 2013

Leg dominance may not be a predictor of asymmetry in peak joint moments and ground reaction forces during sit-to-stand movements.

artículo científico publicado en 2014

Load-sharing in the lumbosacral spine in neutral standing & flexed postures - A combined finite element and inverse static study.

artículo científico publicado en 2017

Mechanical loading effects on isthmic spondylolytic lumbar segment: finite element modelling using a personalised geometry

artículo científico publicado en 2009

Micro-scale finite element modeling of ultrasound propagation in aluminum trabecular bone-mimicking phantoms: A comparison between numerical simulation and experimental results.

artículo científico publicado en 2016

Monitoring for idiopathic scoliosis curve progression using surface topography asymmetry analysis of the torso in adolescents

artículo científico publicado en 2015

Muscle activity, internal loads, and stability of the human spine in standing postures: combined model and in vivo studies

artículo científico publicado en 2004

Muscle force evaluation and the role of posture in human lumbar spine under compression

artículo científico publicado en 2002

On the load-sharing along the ligamentous lumbosacral spine in flexed and extended postures: Finite element study

artículo científico publicado en 2015

Quantification of loading in biomechanical testing: the influence of dissection sequence

artículo científico publicado en 2015

Sensitivity of lumbar spine response to follower load and flexion moment: finite element study.

artículo científico publicado en 2016

Simulation of Low-Intensity Ultrasound Propagating in a Beagle Dog Dentoalveolar Structure to Investigate the Relations between Ultrasonic Parameters and Cementum Regeneration.

artículo científico publicado en 2015

Spinal loads and trunk muscles forces during level walking - A combined in vivo and in silico study on six subjects.

artículo científico publicado en 2017

Spinal muscle forces, internal loads and stability in standing under various postures and loads--application of kinematics-based algorithm

artículo científico publicado en 2004

Surface topography asymmetry maps categorizing external deformity in scoliosis

artículo científico publicado en 2013

Symmetry analysis of talus bone: A Geometric morphometric approach

artículo científico publicado en 2014

The finite element method for micro-scale modeling of ultrasound propagation in cancellous bone

artículo científico publicado en 2014

Three-dimensional geometric analysis of the talus for designing talar prosthetics

artículo científico publicado en 2014

Lista de obras de Marwan El-Rich

A biomechanical study of L5-S1 low-grade isthmic spondylolisthesis using a personalized finite element model.

A geometric approach to study the contact mechanisms in the patellofemoral joint of normal versus patellofemoral pain syndrome subjects.

An in vitro study on the dimensional stability of a vinyl polyether silicone impression material over a prolonged storage period.

Analysis of a generic talar prosthetic with a biological talus: A cadaver study

Analysis of four methods of measuring three-dimensional pelvic tilt in the lateral decubitus position

Assessment of torso deformities using 3D markerless asymmetry analysis and its clinical applications.

Biomechanical response of intact, degenerated and repaired intervertebral discs under impact loading - Ex-vivo and In-Silico investigation.

Calibration of hyperelastic material properties of the human lumbar intervertebral disc under fast dynamic compressive loads

Characterizing asymmetry across the whole sit to stand movement in healthy participants

Correlation Between a Novel Surface Topography Asymmetry Analysis and Radiographic Data in Scoliosis

Development of a novel geometrically-parametric patient-specific finite element model to investigate the effects of the lumbar lordosis angle on fusion surgery

Effect of load position on muscle forces, internal loads and stability of the human spine in upright postures

Effects of eight different ligament property datasets on biomechanics of a lumbar L4-L5 finite element model.

Effects of inter-individual lumbar spine geometry variation on load-sharing: Geometrically personalized Finite Element study

Effects of lumbo-pelvic rhythm on trunk muscle forces and disc loads during forward flexion: A combined musculoskeletal and finite element simulation study

Finite element analysis of mechanical behavior of human dysplastic hip joints: a systematic review

Finite element investigation of the loading rate effect on the spinal load-sharing changes under impact conditions

Geometric analysis of the talus and development of a generic talar prosthetic

Injury mechanisms of the ligamentous cervical C2-C3 Functional Spinal Unit to complex loading modes: Finite Element study.

Internal load-sharing in the human passive lumbar spine: Review of in vitro and finite element model studies

Investigation of impact loading rate effects on the ligamentous cervical spinal load-partitioning using finite element model of functional spinal unit C2-C3.

Investigation of the geometries of the coronoid process and the fibular allograft as a potential surgical replacement

Leg dominance may not be a predictor of asymmetry in peak joint moments and ground reaction forces during sit-to-stand movements.

Load-sharing in the lumbosacral spine in neutral standing & flexed postures - A combined finite element and inverse static study.

Mechanical loading effects on isthmic spondylolytic lumbar segment: finite element modelling using a personalised geometry

Micro-scale finite element modeling of ultrasound propagation in aluminum trabecular bone-mimicking phantoms: A comparison between numerical simulation and experimental results.

Monitoring for idiopathic scoliosis curve progression using surface topography asymmetry analysis of the torso in adolescents

Muscle activity, internal loads, and stability of the human spine in standing postures: combined model and in vivo studies

Muscle force evaluation and the role of posture in human lumbar spine under compression

On the load-sharing along the ligamentous lumbosacral spine in flexed and extended postures: Finite element study

Quantification of loading in biomechanical testing: the influence of dissection sequence

Sensitivity of lumbar spine response to follower load and flexion moment: finite element study.

Simulation of Low-Intensity Ultrasound Propagating in a Beagle Dog Dentoalveolar Structure to Investigate the Relations between Ultrasonic Parameters and Cementum Regeneration.

Spinal loads and trunk muscles forces during level walking - A combined in vivo and in silico study on six subjects.

Spinal muscle forces, internal loads and stability in standing under various postures and loads--application of kinematics-based algorithm

Surface topography asymmetry maps categorizing external deformity in scoliosis

Symmetry analysis of talus bone: A Geometric morphometric approach

The finite element method for micro-scale modeling of ultrasound propagation in cancellous bone

Three-dimensional geometric analysis of the talus for designing talar prosthetics