Lista de obras - Bernardo Innocenti - Dominio Público Uruguay

A comparison between internal and surface temperature measurement techniques during phacoemulsification cataract surgery: thermocamera versus thermocouple

artículo científico publicado en 2008

A new graphical method to display data sets representing biomechanical knee behaviour

artículo científico publicado en 2015

A new spacer-guided, PCL balancing technique for cruciate-retaining total knee replacement

artículo científico publicado en 2013

ARE MRIs NECESSARY TO DEVELOP SUBJECT-SPECIFIC CARTILAGE AND MENISCI GEOMETRIES FOR SUBJECT-SPECIFIC KNEE MODELS?

article by Silvia Pianigiani et al published May 2017 in Journal of Mechanics in Medicine and Biology

All-polyethylene tibial components generate higher stress and micromotions than metal-backed tibial components in total knee arthroplasty

article

An Anthropometric-Based Subject-Specific Finite Element Model of the Human Breast for Predicting Large Deformations.

artículo científico publicado en 2015

Analysis of Biomechanical Differences Between Condylar Constrained Knee and Rotating Hinged Implants: A Numerical Study

scientific article published on 07 August 2019

Analysis of biomechanical quantities during a squat jump: evaluation of a performance index

artículo científico publicado en 2006

Analysis of different geometrical features to achieve close-to-bone stiffness material properties in medical device: A feasibility numerical study

artículo científico publicado en 2022

Anteroposterior positioning of the tibial component and its effect on the mechanics of patellofemoral contact

scientific article published on 01 October 2010

Asymmetric polyethylene inserts promote favorable kinematics and better clinical outcome compared to symmetric inserts in a mobile bearing total knee arthroplasty

artículo científico publicado en 2018

Biomechanical Analysis of Augments in Revision Total Knee Arthroplasty

artículo científico publicado en 2018

Biomechanical Effects of Different Varus and Valgus Alignments in Medial Unicompartmental Knee Arthroplasty

artículo científico publicado en 2016

Biomechanical analysis of the post-cam mechanism in a TKA: comparison between conventional and semi-constrained insert designs

scholarly article by Silvia Pianigiani et al published January 2015 in International Biomechanics

Can CT-based patient-matched instrumentation achieve consistent rotational alignment in knee arthroplasty?

artículo científico publicado en 2011

Can medio-lateral baseplate position and load sharing induce asymptomatic local bone resorption of the proximal tibia? A finite element study

artículo científico publicado en 2009

Cementing the femoral component in total knee arthroplasty: which technique is the best?

artículo científico publicado en 2009

Cementing the tibial component in total knee arthroplasty: which technique is the best?

artículo científico publicado en 2010

Change in knee biomechanics during squat and walking induced by a modification in TKA size

artículo científico publicado en 2020

Collateral ligament strains during knee joint laxity evaluation before and after TKA.

artículo científico publicado en 2013

Comment on Iodice P, Cesinaro S, Romani GL, Pezzulo G: More gain less pain: balance control learning shifts the activation patterns of leg and neck muscles and increases muscular parsimony

artículo científico publicado en 2015

Contact forces in several TKA designs during squatting: A numerical sensitivity analysis

article

Development and analysis of a finite element model to simulate pulmonary emphysema in CT imaging

artículo científico publicado en 2015

Development and validation of a robust patellar reference coordinate system for biomechanical and clinical studies

scientific article published on 03 January 2020

Development of an automatic procedure to mechanically characterize soft tissue materials

article

Development of digital phantoms based on a finite element model to simulate low-attenuation areas in CT imaging for pulmonary emphysema quantification.

artículo científico publicado en 2016

Deviations From Optimal Alignment in TKA: Is There a Biomechanical Difference Between Femoral or Tibial Component Alignment?

artículo científico publicado en 2015

Differences in the stress distribution in the distal femur between patellofemoral joint replacement and total knee replacement: a finite element study

artículo científico

Distal femoral bone mineral density decreases following patellofemoral arthroplasty: 1-year follow-up study of 14 patients

artículo científico publicado en 2010

Does joint line elevation after revision knee arthroplasty affect tibio-femoral kinematics, contact pressure or collateral ligament lengths? An in vitro analysis

artículo científico publicado en 2015

Experimental and numerical analysis of patello-femoral contact mechanics in TKA

artículo científico publicado en 2009

Femoral component loosening in high-flexion total knee replacement: an in vitro comparison of high-flexion versus conventional designs

artículo científico publicado en 2011

Fixation techniques and stem dimensions in hinged total knee arthroplasty: a finite element study

artículo científico publicado en 2016

High congruency MB insert design: stabilizing knee joint even with PCL deficiency

artículo científico publicado en 2019

High-demand motor tasks are more sensitive to detect persisting alterations in muscle activation following total knee replacement

artículo científico publicado en 2016

How accurate and reproducible are the identification of cruciate and collateral ligament insertions using MRI?

scientific article published on 28 May 2016

How precise can bony landmarks be determined on a CT scan of the knee?

artículo científico publicado en 2009

I.S.Mu.L.T. first-time patellar dislocation guidelines.

artículo científico publicado en 2017

INVESTIGATION ON THE EFFECTS INDUCED BY TKA FEATURES ON TIBIO-FEMORAL MECHANICS PART I: FEMORAL COMPONENT DESIGNS

INVESTIGATION ON THE EFFECTS INDUCED BY TKA FEATURES ON TIBIO-FEMORAL MECHANICS PART II: TIBIAL INSERT DESIGNS

article published in 2015

In vivo kinematics of knee replacement during daily living activities: Condylar and post-cam contact assessment by three-dimensional fluoroscopy and finite element analyses

artículo científico publicado en 2016

Is there a biomechanical explanation for anterior knee pain in patients with patella alta?: influence of patellar height on patellofemoral contact force, contact area and contact pressure.

artículo científico publicado en 2009

Knee kinetics and kinematics: What are the effects of TKA malconfigurations?

artículo científico publicado en 2015

Load sharing and ligament strains in balanced, overstuffed and understuffed UKA. A validated finite element analysis

artículo científico publicado en 2014

Material models and properties in the finite element analysis of knee ligaments: a literature review.

artículo científico publicado en 2014

Ocular surface temperature in central retinal vein occlusion: preliminary data.

artículo científico publicado en 2007

Post-cam mechanics and tibiofemoral kinematics: a dynamic in vitro analysis of eight posterior-stabilized total knee designs

artículo científico publicado en 2014

Post-operative blood loss in total knee arthroplasty: knee flexion versus pharmacological techniques.

artículo científico publicado en 2013

Restoration of constitutional alignment in TKA leads to more physiological strains in the collateral ligaments

artículo científico publicado en 2014

Stemmed TKA in a femur with a total hip arthroplasty: is there a safe distance between the stem tips?

artículo científico publicado en 2013

The Mark Coventry Award: Articular contact estimation in TKA using in vivo kinematics and finite element analysis

artículo científico publicado en 2009

The Role of 3D Printing in Medical Applications: A State of the Art

scientific article published on 21 March 2019

The influence of malrotation and femoral component material on patellofemoral wear during gait

artículo científico publicado en 2011

The influence of muscle load on tibiofemoral knee kinematics

artículo científico publicado en 2010

The position of the tibia tubercle in 0°-90° flexion: comparing patients with patella dislocation to healthy volunteers

artículo científico publicado en 2014

Thermography used for analysis and comparison of different cataract surgery procedures based on phacoemulsification

artículo científico publicado en 2006

Tibial tubercle-posterior cruciate ligament distance: a new measurement to define the position of the tibial tubercle in patients with patellar dislocation

artículo científico publicado en 2012

Tibio-Femoral Contact Force During Gait: An Iterative Method Using EMG-Constrained Multi-Body Simulation and Finite Element Analysis

scholarly article published 26 June 2013

Tibio-femoral kinematics in different total knee arthroplasty designs during a loaded squat: A numerical sensitivity study

scientific article published on 06 July 2012

Torsional injuries of the lower limb: an analysis of the frictional torque between different types of football turf and the shoe outsole

article

UKA closely preserves natural knee kinematics in vitro

artículo científico publicado en 2013

Use of porous custom-made cones for meta-diaphyseal bone defects reconstruction in knee revision surgery: a clinical and biomechanical analysis

artículo científico publicado en 2020

Lista de obras de Bernardo Innocenti

A comparison between internal and surface temperature measurement techniques during phacoemulsification cataract surgery: thermocamera versus thermocouple

A new graphical method to display data sets representing biomechanical knee behaviour

A new spacer-guided, PCL balancing technique for cruciate-retaining total knee replacement

ARE MRIs NECESSARY TO DEVELOP SUBJECT-SPECIFIC CARTILAGE AND MENISCI GEOMETRIES FOR SUBJECT-SPECIFIC KNEE MODELS?

All-polyethylene tibial components generate higher stress and micromotions than metal-backed tibial components in total knee arthroplasty

An Anthropometric-Based Subject-Specific Finite Element Model of the Human Breast for Predicting Large Deformations.

Analysis of Biomechanical Differences Between Condylar Constrained Knee and Rotating Hinged Implants: A Numerical Study

Analysis of biomechanical quantities during a squat jump: evaluation of a performance index

Analysis of different geometrical features to achieve close-to-bone stiffness material properties in medical device: A feasibility numerical study

Anteroposterior positioning of the tibial component and its effect on the mechanics of patellofemoral contact

Asymmetric polyethylene inserts promote favorable kinematics and better clinical outcome compared to symmetric inserts in a mobile bearing total knee arthroplasty

Biomechanical Analysis of Augments in Revision Total Knee Arthroplasty

Biomechanical Effects of Different Varus and Valgus Alignments in Medial Unicompartmental Knee Arthroplasty

Biomechanical analysis of the post-cam mechanism in a TKA: comparison between conventional and semi-constrained insert designs

Can CT-based patient-matched instrumentation achieve consistent rotational alignment in knee arthroplasty?

Can medio-lateral baseplate position and load sharing induce asymptomatic local bone resorption of the proximal tibia? A finite element study

Cementing the femoral component in total knee arthroplasty: which technique is the best?

Cementing the tibial component in total knee arthroplasty: which technique is the best?

Change in knee biomechanics during squat and walking induced by a modification in TKA size

Collateral ligament strains during knee joint laxity evaluation before and after TKA.

Comment on Iodice P, Cesinaro S, Romani GL, Pezzulo G: More gain less pain: balance control learning shifts the activation patterns of leg and neck muscles and increases muscular parsimony

Contact forces in several TKA designs during squatting: A numerical sensitivity analysis

Development and analysis of a finite element model to simulate pulmonary emphysema in CT imaging

Development and validation of a robust patellar reference coordinate system for biomechanical and clinical studies

Development of an automatic procedure to mechanically characterize soft tissue materials

Development of digital phantoms based on a finite element model to simulate low-attenuation areas in CT imaging for pulmonary emphysema quantification.

Deviations From Optimal Alignment in TKA: Is There a Biomechanical Difference Between Femoral or Tibial Component Alignment?

Differences in the stress distribution in the distal femur between patellofemoral joint replacement and total knee replacement: a finite element study

Distal femoral bone mineral density decreases following patellofemoral arthroplasty: 1-year follow-up study of 14 patients

Does joint line elevation after revision knee arthroplasty affect tibio-femoral kinematics, contact pressure or collateral ligament lengths? An in vitro analysis

Experimental and numerical analysis of patello-femoral contact mechanics in TKA

Femoral component loosening in high-flexion total knee replacement: an in vitro comparison of high-flexion versus conventional designs

Fixation techniques and stem dimensions in hinged total knee arthroplasty: a finite element study

High congruency MB insert design: stabilizing knee joint even with PCL deficiency

High-demand motor tasks are more sensitive to detect persisting alterations in muscle activation following total knee replacement

How accurate and reproducible are the identification of cruciate and collateral ligament insertions using MRI?

How precise can bony landmarks be determined on a CT scan of the knee?

I.S.Mu.L.T. first-time patellar dislocation guidelines.

INVESTIGATION ON THE EFFECTS INDUCED BY TKA FEATURES ON TIBIO-FEMORAL MECHANICS PART I: FEMORAL COMPONENT DESIGNS

INVESTIGATION ON THE EFFECTS INDUCED BY TKA FEATURES ON TIBIO-FEMORAL MECHANICS PART II: TIBIAL INSERT DESIGNS

In vivo kinematics of knee replacement during daily living activities: Condylar and post-cam contact assessment by three-dimensional fluoroscopy and finite element analyses

Is there a biomechanical explanation for anterior knee pain in patients with patella alta?: influence of patellar height on patellofemoral contact force, contact area and contact pressure.

Knee kinetics and kinematics: What are the effects of TKA malconfigurations?

Load sharing and ligament strains in balanced, overstuffed and understuffed UKA. A validated finite element analysis

Material models and properties in the finite element analysis of knee ligaments: a literature review.

Ocular surface temperature in central retinal vein occlusion: preliminary data.

Post-cam mechanics and tibiofemoral kinematics: a dynamic in vitro analysis of eight posterior-stabilized total knee designs

Post-operative blood loss in total knee arthroplasty: knee flexion versus pharmacological techniques.

Restoration of constitutional alignment in TKA leads to more physiological strains in the collateral ligaments

Stemmed TKA in a femur with a total hip arthroplasty: is there a safe distance between the stem tips?

The Mark Coventry Award: Articular contact estimation in TKA using in vivo kinematics and finite element analysis

The Role of 3D Printing in Medical Applications: A State of the Art

The influence of malrotation and femoral component material on patellofemoral wear during gait

The influence of muscle load on tibiofemoral knee kinematics

The position of the tibia tubercle in 0°-90° flexion: comparing patients with patella dislocation to healthy volunteers

Thermography used for analysis and comparison of different cataract surgery procedures based on phacoemulsification

Tibial tubercle-posterior cruciate ligament distance: a new measurement to define the position of the tibial tubercle in patients with patellar dislocation

Tibio-Femoral Contact Force During Gait: An Iterative Method Using EMG-Constrained Multi-Body Simulation and Finite Element Analysis

Tibio-femoral kinematics in different total knee arthroplasty designs during a loaded squat: A numerical sensitivity study

Torsional injuries of the lower limb: an analysis of the frictional torque between different types of football turf and the shoe outsole

UKA closely preserves natural knee kinematics in vitro

Use of porous custom-made cones for meta-diaphyseal bone defects reconstruction in knee revision surgery: a clinical and biomechanical analysis