29Si MAS-N.M.R. spectra of lamellar silicic acid H-magadiite and its trimethylsilyl derivative

Advanced Materials and New Applications of Sepiolite and Palygorskite

Advanced biohybrid materials based on nanoclays for biomedical applications

Advances in biomimetic and nanostructured biohybrid materials

scientific article published on January 2010

Agar-based bridges as biocompatible candidates to provide guide cues in spinal cord injury repair

scientific article published on 01 January 2013

Algae–silica systems as functional hybrid materials

Amino-polysiloxane hybrid materials as carbon composite electrodes for potentiometric detection of anions

Amperometric Sensors Based on Mercaptopyridine−Montmorillonite Intercalation Compounds

An Introduction to Bio-nanohybrid Materials

BIONANOCOMPOSITES OF SEPIOLITE AND PALYGORSKITE AND THEIR MEDICAL ISSUES

Bio-Nanocomposites Based on Layered Double Hydroxides

Bio-nanocomposites by Assembling of Gelatin and Layered Perovskite Mixed Oxides

Bio-nanocomposites by assembling of gelatin and layered perovskite mixed oxides

Bio-organoclays Based on Phospholipids as Immobilization Hosts for Biological Species

artículo científico publicado en 2010

Bioinspired Materials Chemistry I: Organic-Inorganic Nanocomposites

article

Biomimetic Architectures for the Impedimetric Discrimination of Influenza Virus Phenotypes

Bionanocomposite foams based on the assembly of starch and alginate with sepiolite fibrous clay

artículo científico publicado en 2016

Bionanocomposites

Bionanocomposites Based on Clay Minerals

Bionanocomposites as New Carriers for Influenza Vaccines

Bionanocomposites based on alginate–zein/layered double hydroxide materials as drug delivery systems

article published in 2010

Bionanocomposites based on layered double hydroxides as drug delivery systems

Bionanocomposites based on layered silicates and cationic starch as eco-friendly adsorbents for hexavalent chromium removal

artículo científico publicado en 2014

Bionanocomposites based on polysaccharides and fibrous clays for packaging applications

Bionanocomposites: A New Concept of Ecological, Bioinspired, and Functional Hybrid Materials

Biopolymer−Clay Nanocomposites Based on Chitosan Intercalated in Montmorillonite

Biorefinery of Lignocellulosic Biomass from an Elm Clone: Production of Fermentable Sugars and Lignin-Derived Biochar for Energy and Environmental Applications

CHAPTER 1. Functional Nanocomposites Based on Fibrous Clays

Caramel–clay nanocomposites

Case-based reasoning (CBR) for multicomponent analysis using sensor arrays: application to water quality evaluation

artículo científico publicado en 2002

Chitosan-Clay Bio-Nanocomposites

Chitosan–clay nanocomposites: application as electrochemical sensors

article published in 2005

Clay-Based Bionanocomposite Foams

Clay-Graphene Nanoplatelets Functional Conducting Composites

Clay-Organic Interfaces for Design of Functional Hybrid Materials

Clay-bionanocomposites with sacran megamolecules for the selective uptake of neodymium

scholarly article by Ana C. S. Alcântara et al published 2014 in Journal of Materials Chemistry A

Clay-lipid nanohybrids: towards influenza vaccines and beyond

article published in 2016

Clay-supported graphene materials: application to hydrogen storage.

artículo científico publicado en 2013

Conducting macroporous carbon foams derived from microwave-generated caramel/silica gel intermediates

Design and preparation of bionanocomposites based on layered solids with functional and structural properties

Editorial [ Trends in Bio-Hybrid Nanostructured Materials Guest Editors: Eduardo Ruiz-Hitzky and Margarita Darder ]

Effective intercalation of zein into Na-montmorillonite: role of the protein components and use of the developed biointerfaces

artículo científico publicado en 2016

Efficient and Ecological Removal of Anionic Pollutants by Cationic Starch-Clay Bionanocomposites

Electrical characterization of poly(ethylene oxide)-clay nanocomposites prepared by microwave irradiation

Encapsulation of enzymes in alumina membranes of controlled pore size

Fe-containing pillared clays as catalysts for phenol hydroxylation

Fibrous clays based bionanocomposites

Functional Hybrid Nanopaper by Assembling Nanofibers of Cellulose and Sepiolite

Functional biohybrid materials based on halloysite, sepiolite and cellulose nanofibers for health applications

scientific article published on 13 December 2019

Functional biopolymer nanocomposites based on layered solids

Functionalized Carbon–Silicates from Caramel–Sepiolite Nanocomposites

Functionalized Carbon–Silicates from Caramel–Sepiolite Nanocomposites

artículo científico publicado en 2007

Functionalizing inorganic solids: towards organic-inorganic nanostructured materials for intelligent and bioinspired systems

artículo científico publicado en 2003

Gelatin renaturation and the interfacial role of fillers in bionanocomposites

artículo científico publicado en 2010

Gelatin-Clay Bio-Nanocomposites: Structural and Functional Properties as Advanced Materials

artículo científico publicado en 2009

Gelatine-based bio-nanocomposites

Gelation under dynamic conditions: a strategy for in vitro cell ordering

artículo científico publicado en 2006

Graphene-Clay Based Nanomaterials for Clean Energy Storage

Hierarchically structured bioactive foams based on polyvinyl alcohol–sepiolite nanocomposites

artículo científico publicado en 2013

Hybrid and Biohybrid Materials Based on Layered Clays

Hybrid and biohybrid silicate based materials: molecular vs. block-assembling bottom–up processes ⬇️

artículo científico publicado el 13 de diciembre de 2010

Hybrid materials based on clays for environmental and biomedical applications

Hybrid materials based on lichen–polysiloxane matrices: application as electrochemical sensors

In situ generation of 3D graphene-like networks from cellulose nanofibres in sintered ceramics

artículo científico publicado en 2018

Influence of Anodic Conditions on Self-ordered Growth of Highly Aligned Titanium Oxide Nanopores.

artículo científico publicado en 2007

Influence of iron in the formation of conductive polypyrrole-clay nanocomposites

Insertion of In(III) and Ga(III) into MPS3 (M = Mn, Cd) layered materials

Intercalation and electrical behavior of Ta xMo1-xS2 (x > 0.5) layered mixed disulfides

Intercalation of metformin into montmorillonite

artículo científico publicado en 2018

Interdiffusive Surfactant Procedure for the Preparation of Nanoarchitectured Porous Films: Application to the Growth of Titania Thin Films on Silicon Substrates

artículo científico publicado en 2019

Lipid-Based Bio-Nanohybrids for Functional Stabilisation of Influenza Vaccines

article published in 2012

Materials Science in Madrid ⬇️

artículo científico publicado el 23 de noviembre de 2011

Microfibrous Chitosan−Sepiolite Nanocomposites

Modulation of Inorganic Matrices for Functional Nanoarchitectures Fabrication: The Simultaneous Effect of Moisture and Temperature in the Preparation of Metakaolin Based Geopolymers

Multicomponent bionanocomposites based on clay nanoarchitectures for electrochemical devices

scientific article published on 25 June 2019

Multifunctional Porous Materials Through Ferrofluids

Multifunctional materials based on graphene-like/sepiolite nanocomposites

Multisensor device based on Case-Based Reasoning (CBR) for monitoring nutrient solutions in fertigation

Nanoarchitectures Based on Layered Titanosilicates Supported on Glass Fibers: Application to Hydrogen Storage

artículo científico publicado en 2013

Nanoarchitectures by Sol-Gel from Silica and Silicate Building Blocks

Nanostructured carbon–metal hybrid aerogels from bacterial cellulose

scholarly article in RSC Advances, vol. 7 no. 67, 2017

Nanotechnology Responses to COVID-19

artículo científico publicado en 2020

New titania-clay nanostructured porous materials

Novel architectures in porous materials based on clays

Novel magnetic organic–inorganic nanostructured materials

One-step patterning of hybrid xerogel materials for the fabrication of disposable solid-state light emitters

artículo científico publicado en 2012

Organoclay hybrid materials as precursors of porous ZnO/silica-clay heterostructures for photocatalytic applications

artículo científico publicado en 2016

PEO intercalation in layered chalcogenides

Phospholipid–Sepiolite Biomimetic Interfaces for the Immobilization of Enzymes ⬇️

artículo científico publicado el 21 de octubre de 2011

Photoactive nanoarchitectures based on clays incorporating TiO2 and ZnO nanoparticles

scientific article published on 31 May 2019

Poly(3,4-ethylenedioxythiophene)–clay nanocomposites

Polymer-clay nanocomposites as precursors of nanostructured carbon materials for electrochemical devices: templating effect of clays

artículo científico publicado en 2008

Polysaccharide–fibrous clay bionanocomposites

Preface

Preface

Preparation and properties as positive electrodes of PANI–LiNi0.8Co0.2O2 nanocomposites

Preparation of an Li0.7Ni0.8Co0.2O2 Electrode Material From a New Li-Co-Ni Mixed-Citrate Precursor

Progress in Bionanocomposite and Bioinspired Foams

artículo científico publicado en 2011

Reactive nanocomposites based on pillared clays

Recent Advances on Fibrous Clay-Based Nanocomposites

Relevance of polymer– and biopolymer–clay nanocomposites in electrochemical and electroanalytical applications

Sepiolite-carbon nanocomposites doped with Pd as improving catalysts for hydrodechlorination processes

Silacrown Ethers-Clay Intercalation Materials: Application in Potentiometric Sensors for Detection of Alkali-Ions

Silacrown modified xerogels as functional hybrid materials for carbon composite electrodes

Silica-Sepiolite Nanoarchitectures

artículo científico publicado en 2013

Silica-clay nanocomposites

artículo científico publicado en 2003

Silica/clay organo-heterostructures to promote polyethylene–clay nanocomposites by in situ polymerization

scholarly article by Paula A. Zapata et al published February 2013 in Applied Catalysis A: General

Silicate-based multifunctional nanostructured materials with magnetite and Prussian blue: application to cesium uptake

Silica–alumina/sepiolite nanoarchitectures

Smectite-chitosan-based electrodes in electrochemical detection of phenol and its derivatives

Supported Graphene from Natural Resources: Easy Preparation and Applications

scientific article published on 01 November 2011

Synthesis of p-cymene from limonene, a renewable feedstock

article published in 2008

Template Synthesis of Nanostructured Carbonaceous Materials for Application in Electrochemical Devices

scholarly article by Rocio Fernandez-Saavedra et al published 1 November 2009 in Current Nanoscience

The Fascinating World of the Functional Hybrid and Biohybrid Materials

The Maya blue nanostructured material concept applied to colouring geopolymers

scholarly article in RSC Advances, vol. 5 no. 120, 2015

The Meeting Point of Carbonaceous Materials and Clays: Toward a New Generation of Functional Composites

article published in 2017

TiO 2 -clay based nanoarchitectures for enhanced photocatalytic hydrogen production

scholarly article by Javier Pérez-Carvajal et al published March 2016 in Microporous and Mesoporous Materials

Titania−Sepiolite Nanocomposites Prepared by a Surfactant Templating Colloidal Route

Toward a green way for the chemical production of supported graphenes using porous solids

Ultrasound assisted preparation of chitosan–vermiculite bionanocomposite foams for cadmium uptake

Use of biopolymers as oriented supports for the stabilization of different polymorphs of biomineralized calcium carbonate with complex shape

Zein-Fibrous Clays Biohybrid Materials

Zeolite–sepiolite nanoheterostructures

ZnO/sepiolite heterostructured materials for solar photocatalytic degradation of pharmaceuticals in wastewater

scholarly article by M. Akkari et al published May 2018 in Applied Clay Science

“Bottle-around-a-ship” confinement of high loadings of Acridine Orange in new aluminophosphate crystalline materials