Filtros de búsqueda

Lista de obras de Eduardo Piza Pellizzer

A 3-D finite element study of the influence of crown-implant ratio on stress distribution

artículo científico publicado en 2013

Analysis of Vertical Marginal Adaptation of Zirconia Fixed Dental Prosthesis Frameworks Fabricated by the CAD/CAM System: A Randomized, Double-Blind Study

artículo científico publicado en 2016

Analysis of the biomechanical behavior of short implants: The photo-elasticity method

artículo científico publicado en 2015

Analysis of the peri-implant soft tissues in contact with zirconia abutments: an evidence-based literature review.

artículo científico

Are Zirconia Implant Abutments Safe and Predictable in Posterior Regions? A Systematic Review and Meta-Analysis.

artículo científico publicado en 2016

Biomechanical Three-Dimensional Finite Element Analysis of Single Implant-Supported Prostheses in the Anterior Maxilla, with Different Surgical Techniques and Implant Types

artículo científico publicado en 2017

Biomechanical analysis of different implant-abutments interfaces in different bone types: An in silico analysis

scientific article published on 03 May 2018

Biomechanical influence of crown-to-implant ratio on stress distribution over internal hexagon short implant: 3-D finite element analysis with statistical test.

artículo científico publicado en 2014

Can the modeling for simplification of a dental implant surface affect the accuracy of 3D finite element analysis?

artículo científico publicado en 2016

Care and cleaning of maxillofacial prostheses.

artículo científico publicado en 2010

Clinical performance of bulk-fill and conventional resin composite restorations in posterior teeth: a systematic review and meta-analysis

artículo científico publicado en 2018

Clinical viability for immediate loading of dental implants: part II--treatment alternatives

artículo científico publicado en 2009

Clinical viability of immediate loading of dental implants: part I--factors for success

artículo científico publicado en 2009

Comparison of external and internal implant-abutment connections for implant supported prostheses. A systematic review and meta-analysis.

artículo científico publicado en 2017

Comparison of the use of titanium-zirconium alloy and titanium alloy in dental implants: A systematic review and meta-analysis.

artículo científico publicado en 2018

Complete overdentures retained by mini implants: A systematic review.

artículo científico publicado en 2016

Complications with PMMA compared with other materials used in cranioplasty: a systematic review and meta-analysis

scientific article published on 07 June 2018

Computer-guided surgery in implantology: review of basic concepts

artículo científico publicado en 2010

Craniofacial implants success in facial rehabilitation.

artículo científico publicado en 2011

Does nocturnal use of a complete denture interfere with the degree of obstructive sleep apnea? A systematic review and meta-analysis

artículo científico publicado en 2021

Effect of crown-to-implant ratio on peri-implant stress: a finite element analysis.

artículo científico publicado en 2014

Effect of different types of prosthetic platforms on stress-distribution in dental implant-supported prostheses.

artículo científico publicado en 2016

Effect of polymerization and accelerated aging on iris color stability of ocular prosthesis.

artículo científico

Effect of the parafunctional occlusal loading and crown height on stress distribution

artículo científico publicado en 2014

Effectiveness of Corticoid Administration in Orthognathic Surgery for Edema and Neurosensorial Disturbance: A Systematic Literature Review.

artículo científico publicado en 2017

Effects of platelet-rich plasma in association with bone grafts in maxillary sinus augmentation: a systematic review and meta-analysis.

artículo científico publicado en 2016

Efficacy of Dental Bleaching with Whitening Dentifrices: A Systematic Review

scholarly article by Bruno G S Casado et al published 30 October 2018 in International Journal of Dentistry

Esthetic interim acrylic resin prosthesis reinforced with metal casting

artículo científico publicado en 2009

Evaluation of bone insertion level of support teeth in class I mandibular removable partial denture associated with an osseointegrated implant: a study using finite element analysis

artículo científico publicado en 2011

Evaluation of cement-retained versus screw-retained implant-supported restorations for marginal bone loss: A systematic review and meta-analysis.

artículo científico publicado en 2015

Evaluation of condylar resorption rates after orthognathic surgery in class II and III dentofacial deformities: A systematic review

scientific article published on 21 February 2018

Evaluation of different retention systems on a distal extension removable partial denture associated with an osseointegrated implant

artículo científico publicado en 2010

Evaluation of marginal bone loss of dental implants with internal or external connections and its association with other variables: A systematic review.

artículo científico publicado en 2016

Evaluation of stress patterns produced by implant-retained overdentures and implant-retained fixed partial denture

scientific article published on 01 November 2011

Evaluation of the color stability of two techniquesfor reproducing artificial irides after microwave polymerization ⬇️

artículo científico publicado el 1 de mayo de 2011

Evaluation of the effect of an offset implant configuration in the posterior maxilla with external hexagon implant platform: A 3-dimensional finite element analysis

artículo científico publicado en 2017

Evaluation of the influence of location of osseointegrated implants associated with mandibular removable partial dentures

artículo científico publicado en 2008

Existence of and predisposing factors for implant periapical lesions

artículo científico publicado en 2015

Finite element analysis of implant-supported prosthesis with pontic and cantilever in the posterior maxilla.

artículo científico publicado en 2017

Finite element analysis on influence of implant surface treatments, connection and bone types

artículo científico publicado en 2016

Fracture resistance of structurally compromised root filled bovine teeth restored with accessory glass fibre posts.

artículo científico publicado en 2008

Implant-retained thumb prosthesis with anti-rotational attachment for a geriatric patient

artículo científico publicado en 2009

Implants in the zygomatic bone for maxillary prosthetic rehabilitation: a systematic review.

artículo científico publicado en 2014

Indications for the HPV vaccine in adolescents: a review of the literature

artículo científico publicado en 2014

Influence of bicortical techniques in internal connection placed in premaxillary area by 3D finite element analysis.

artículo científico publicado en 2016

Influence of cusp inclination on stress distribution in implant-supported prostheses. A three-dimensional finite element analysis.

artículo científico publicado en 2010

Influence of different base thicknesses on maxillary complete denture processing: linear and angular graphic analysis on the movement of artificial teeth

artículo científico publicado en 2011

Influence of implant angulation with different crowns on stress distribution.

artículo científico publicado en 2011

Influence of implant inclination associated with mandibular class I removable partial denture

artículo científico publicado en 2011

Influence of length and diameter of implants associated with distal extension removable partial dentures

artículo científico publicado en 2007

Influence of parafunctional loading and prosthetic connection on stress distribution: a 3D finite element analysis

artículo científico publicado en 2015

Influence of pigment and opacifier on dimensional stability and detail reproduction of maxillofacial silicone elastomer

scientific article published on 01 September 2011

Influence of ridge inclination and implant localization on the association of mandibular Kennedy class I removable partial denture

artículo científico publicado en 2011

Influence of tapered and external hexagon connections on bone stresses around tilted dental implants: three-dimensional finite element method with statistical analysis

artículo científico publicado en 2013

Influence of the connector and implant design on the implant-tooth-connected prostheses

artículo científico publicado en 2009

Influence of the implant diameter with different sizes of hexagon: analysis by 3-dimensional finite element method

artículo científico publicado en 2011

Irradiated patients and survival rate of dental implants: A systematic review and meta-analysis.

artículo científico publicado en 2016

Is the internal connection more efficient than external connection in mechanical, biological, and esthetical point of views? A systematic review

artículo científico

Longevity of dental implants in type IV bone: a systematic review.

artículo científico

Mobility, aesthetic, implants, and satisfaction of the ocular prostheses wearers.

artículo científico publicado en 2010

Optical impression systems for CAD-CAM restorations

artículo científico publicado en 2012

Patients' satisfaction after surgical facial reconstruction or after rehabilitation with maxillofacial prosthesis

scientific article published on March 2011

Phantom eye syndrome: a review of the literature

artículo científico publicado en 2014

Photoelastic analysis of biomechanical behavior of single and multiple fixed partial prostheses with different prosthetic connections.

artículo científico publicado en 2011

Photoelastic analysis of cemented or screwed implant-supported prostheses with different prosthetic connections

artículo científico publicado en 2011

Photoelastic analysis of implant-retained and conventional obturator prostheses with different attachment systems and soft relining.

artículo científico publicado en 2011

Photoelastic analysis of stress distribution in different retention systems for facial prosthesis.

artículo científico publicado en 2009

Photoelastic analysis of stress distribution with different implant systems.

artículo científico publicado en 2011

Photoelastic analysis of the influence of residual ridge inclination in conjugated class I mandibular prostheses with different attachment systems.

artículo científico publicado en 2013

Photoelastic analysis to compare implant-retained and conventional obturator dentures

artículo científico publicado en 2012

Photoelastic stress analysis in screwed and cemented implant-supported dentures with external hexagon implants

artículo científico publicado en 2010

Photoelastic stress analysis of different attachment systems on implant-retained and conventional palatal obturator prostheses.

artículo científico publicado en 2011

Placement of dental implants in the maxillary tuberosity: a systematic review

artículo científico publicado en 2014

Planning for immediate loading of implant-supported prostheses: literature review

artículo científico publicado en 2011

Platform-switching implants and bone preservation: a systematic review and meta-analysis

artículo científico

Prevalence of removable partial dentures users treated at the Aracatuba Dental School-UNESP.

artículo científico publicado en 2012

Rehabilitation With Mandibular Implant-Retained Complete Overdenture Using the Association of Two Retention Systems.

artículo científico publicado en 2016

Relationship Between Implant Stability Measurements Obtained by Two Different Devices: A Systematic Review.

artículo científico publicado en 2016

Removable Partial Denture After Gunshot Injury: Five Year Follow-Up

artículo científico publicado en 2017

Removable partial denture in combination with a milled fixed partial prosthesis as interim restorations in long-term treatment

artículo científico publicado en 2009

Retention System and Splinting on Morse Taper Implants in the Posterior Maxilla by 3D Finite Element Analysis.

artículo científico publicado en 2018

Short dental implants versus standard dental implants placed in the posterior jaws: A systematic review and meta-analysis

artículo científico publicado en 2016

Splinted and Nonsplinted Crowns with Different Implant Lengths in the Posterior Maxilla by Three-Dimensional Finite Element Analysis

artículo científico publicado en 2018

Storage media for avulsed teeth: a literature review

artículo científico

Stress Analysis of Axial and Tilted Implants in Full-arch Fixed Dentures Under Different Abutment Conditions.

artículo científico publicado en 2016

Stress analysis in bone tissue around single implants with different diameters and veneering materials: a 3-D finite element study.

artículo científico publicado en 2013

Stress analysis in platform-switching implants: a 3-dimensional finite element study

scientific article published on 08 October 2010

Surgical versus non-surgical treatment of actinic cheilitis: A systematic review and meta-analysis

artículo científico publicado en 2018

Survival of all-ceramic restorations after a minimum follow-up of five years: A systematic review.

artículo científico publicado en 2016

Systematic review and meta-analysis of welding procedures in one-piece cast implant-supported frameworks

artículo científico publicado en 2019

Systemic Trans- and Postoperative Evaluations of Patients Undergoing Dental Implant Surgery

artículo científico publicado en 2016

Technique for indexing an immediate loading implant position for a provisional restoration

artículo científico publicado en 2010

The Effect of Surface Treatment on Shear Bond Strength between Y-TZP and Veneer Ceramic: A Systematic Review and Meta-Analysis

artículo científico publicado en 2017

The effect of offset implant configuration on bone stress distribution: a systematic review

artículo científico

Three-Dimensional Finite Element Analysis of Anterior Single Implant-Supported Prostheses with Different Bone Anchorages.

artículo científico publicado en 2015

Three-Dimensional Finite Element Analysis of Varying Diameter and Connection Type in Implants with High Crown-Implant Ratio

artículo científico publicado en 2018

Three-dimensional finite element analysis of glass fiber and cast metal posts with different alloys for reconstruction of teeth without ferrule.

artículo científico publicado en 2017

Three-dimensional finite element analysis of stress distribution in retention screws of different crown-implant ratios.

artículo científico publicado en 2013

Use of Resin-Based Provisional Material to Create the Posterior Palatal Seal in Complete Denture Definitive Impressions

artículo científico publicado en 2017

Use of stress analysis methods to evaluate the biomechanics of oral rehabilitation with implants.

artículo científico

Dominio Público Uruguay está sostenido por:

Acerca de Dominio Público Uruguay

Ayuda