(iv) Tribofilm on hip implants

3D tribo-nanoprinting using triboreactive materials ⬇️

artículo científico publicado en 2018

3rd Viennano International Conference on 'Nano-technology'

scholarly article by Wilfried Bartz et al published December 2009 in Tribology - Materials, Surfaces & Interfaces

A Boundary Lubrication Friction Model Sensitive to Detailed Engine Oil Formulation in an Automotive Cam/Follower Interface

article

A Comparison of the Corrosion Behavior of WC-Co-Cr and WC-Co HVOF Thermally Sprayed Coatings by In Situ Atomic Force Microscopy (AFM)

A New Asperity-Scale Mechanistic Model of Tribocorrosive Wear: Synergistic Effects of Mechanical Wear and Corrosion

artículo científico publicado en 2018

A Numerical Calculation of the Contact Area and Pressure of Real Surfaces in Sliding Wear

A Semi-deterministic Wear Model Considering the Effect of Zinc Dialkyl Dithiophosphate Tribofilm ⬇️

article

A Study of the Pitting and Uniform Corrosion Characteristics of X65 Carbon Steel in Different H2S-CO2-Containing Environments ⬇️

A combined bulk chemistry/electrochemical approach to study the precipitation, deposition and inhibition of CaCO3

A comparison of boundary wear film formation on steel and a thermal sprayed Co/Cr/Mo coating under sliding conditions

A link between the tribology and corrosive degradation of metal-on-metal THRs ⬇️

A methodology for Raman characterisation of MoDTC tribofilms and its application in investigating the influence of surface chemistry on friction performance of MoDTC lubricants ⬇️

article published in 2015

A new insight into the interfacial mechanisms of the tribofilm formed by zinc dialkyl dithiophosphate ⬇️

A new method to evaluate the overall anti-shudder property of automatic transmission fluids – multiple parameters spider chart evaluation

article

A new strategy for the relative movement of rough surfaces in contact using a boundary element method ⬇️

A novel multiple electrode direct current technique for characterisation of tissue resistance during surgery ⬇️

artículo científico publicado en 2015

A numerical investigation of a geometry independent integrated method to predict erosion rates in slurry erosion

A numerical model for calculation of the restitution coefficient of elastic-perfectly plastic and adhesive bodies with rough surfaces ⬇️

A review of iron carbonate (FeCO3) formation in the oil and gas industry ⬇️

A simple deterministic plastoelastohydrodynamic lubrication (PEHL) model in mixed lubrication ⬇️

article by Abdullah Azam et al published March 2019 in Tribology International

A study of the erosion-corrosion behaviour of engineering steels for marine pumping applications

A study of the localized and uniform corrosion characteristics of X65 carbon steel in different H2S-CO2-containing environments

A systematic erosion–corrosion study of two stainless steels in marine conditions via experimental design

article by H. Meng et al published September 2007 in Wear

A time-dependent model for improved biogalvanic tissue characterisation. ⬇️

artículo científico publicado en 2015

A tribochemical evaluation of a WC–DLC coating in EP lubrication conditions

Adsorption of polyphosphinocarboxylic acid (PPCA) scale inhibitor on carbon nanotubes (CNTs): A prospective method for enhanced oilfield scale prevention ⬇️

Alleviation of erosion–corrosion damage by liquid–sand impact through use of chemicals

An Analytical Solution for Elastic and Elastic-Plastic Contact Models

An Experimental Study of the Corrosion Behavior of Nickel Tungsten Carbide in Some Water-Glycol Hydraulic Fluids for Subsea Applications

scholarly article by Lei Zheng et al published 27 March 2009 in Journal of Materials Engineering and Performance

An Investigation of Freezing of Supercooled Water on Anti-Freeze Protein Modified Surfaces

An appraisal of the thermal decomposition mechanisms of ILs as potential lubricants

artículo científico publicado en 2019

An assessment of the corrosion behaviour of high-grade alloys in seawater at elevated temperature and under a high velocity impinging flow

An assessment of the formation of electrodeposited scales using scanning electron and atomic force microscopy

An assessment of the instability of Ti and its alloys in acidic environments at elevated temperature

An electrochemical and microstructural assessment of erosion–corrosion of cast iron

An examination of the electrochemical characteristics of two stainless steels (UNS S32654 and UNS S31603) under liquid–solid impingement

article by Xinming Hu et al published March 2004 in Wear

An experimental and analytical study of the effect of water and its tribochemistry on the tribocorrosive wear of boundary lubricated systems with ZDDP-containing oil ⬇️

article published in 2016

An experimental and numerical investigation of CO2 corrosion in a rapid expansion pipe geometry

artículo científico publicado en 2020

An experimental evaluation of reverse osmosis membrane performance in oily water

article

An experimental study of the erosion–corrosion behavior of plasma transferred arc MMCs

An in situ synchrotron XAS methodology for surface analysis under high temperature, pressure, and shear. ⬇️

artículo científico publicado en 2017

An in vivo analysis of safe laparoscopic grasping thresholds for colorectal surgery. ⬇️

artículo científico publicado en 2018

An integrated methodology for predicting material wear rates due to erosion

An investigation into the relationship between flux and roughness on RO membranes using scanning probe microscopy

Analysis of the use of environmentally friendly corrosion inhibitors for mild steel in a carbon dioxide saturated chloride solution via experimental design ⬇️

Analyzing Elastic-Plastic Real Rough Surface Contact in Running-in

Anti-Shudder Properties of ATFs—An Investigation into Friction Modifying Mechanisms Using VSFT and SAE No. 2 Tests

article

Anti-Shudder Properties of ATFs—Investigation into Tribofilm Composition on Clutch Friction Material and Steel Surfaces and the Link to Frictional Performance

artículo científico

Aqueous Corrosion of Cobalt and its Alloys

scholarly article published 2010

Aspects of microstructure on the synergy and overall material loss of thermal spray coatings in erosion–corrosion environments

Assessing Surface Engineering Solutions for Oilfield Scale; Correlating Laboratory Tests to Field Trials

Assessing the effect of corrosion inhibitor on erosion–corrosion of API-5L-X65 in multi-phase jet impingement conditions

Assessing the effect of on scale formation–bulk precipitation and surface deposition

article by Tao Chen et al published February 2005 in Journal of Crystal Growth

Assessing the influence of shear stress and particle impingement on inhibitor efficiency through the application of in-situ electrochemistry in a CO2-saturated environment

article by O.O. Ige et al published July 2013 in Wear

Assessing the kinetics and mechanisms of corrosion of cast and HIPed Stellite 6 in aqueous saline environments

Assessing the resistance of metal matrix composites and their microstructural integrity under erosion–corrosion

Assessment of Preferential Weld Corrosion of Carbon Steel Pipework in CO2-Saturated Flow-Induced Corrosion Environments

Assessment of barium sulphate formation and inhibition at surfaces with synchrotron X-ray diffraction (SXRD)

scholarly article by Eleftheria Mavredaki et al published February 2011 in Applied Surface Science

Assessment of combined scale/corrosion inhibitors – A combined jar test/bubble cell ⬇️

Assessment of electrochemical properties of a biogalvanic system for tissue characterisation ⬇️

artículo científico publicado en 2015

Assessment of general and localized corrosion behavior of X65 and 13Cr steels in water-saturated supercritical CO 2 environments with SO 2 /O 2 ⬇️

Assessment of the corrosion rates and mechanisms of a WC–Co–Cr HVOF coating in static and liquid–solid impingement saline environments

Automatic transmission fluid corrosion inhibitor interactions with copper ⬇️

article

Behaviour of cracked reinforced concrete beams under repeated and sustained load types

Bio-inspiration for a Miniature Robot Inside the Abdomen

article

Bio-tribocorrosion: surface interactions in total joint replacement (TJR)

Bio-tribology and bio-mimetics in the operating environment

Bio-tribology of incontinence management products: additional complexities at the skin–pad interface

article published in 2018

Biomimetic lubricant-infused titania nanoparticle surfaces via layer-by-layer deposition to control biofouling

artículo científico publicado en 2020

Biotribocorrosion of CoCrMo orthopaedic implant materials—Assessing the formation and effect of the biofilm

Biotribocorrosion of metal-on-metal hip replacements: How surface degradation can influence metal ion formation

Biotribocorrosion: Some electrochemical observations from an instrumented hip joint simulator

Biotribocorrosion—an appraisal of the time dependence of wear and corrosion interactions: I. The role of corrosion

Biotribocorrosion—an appraisal of the time dependence of wear and corrosion interactions: II. Surface analysis

article

Boro-nitriding coating on pure iron by powder-pack boriding and nitriding processes ⬇️

CO2 erosion–corrosion of pipeline steel (API X65) in oil and gas conditions—A systematic approach

article published in 2009

Calcareous scales formed by cathodic protection—an assessment of characteristics and kinetics

article

Calcium carbonate scale formation—assessing the initial stages of precipitation and deposition

Calcium sulphonate and its interactions with ZDDP on both aluminium–silicon and model silicon surfaces

article

Case study on erosion–corrosion degradation of pipework located on an offshore oil and gas facility

Challenges of simulating ‘fired engine’ ring-liner oil additive/surface interactions in ring-liner bench tribometer

Characterisation of high-grade alloy behaviour in severe erosion–corrosion conditions

Characterisation of plasma-treated textiles

article

Characterisation of the passive film on HIPed Stellite 6 alloy using X-ray photoelectron spectroscopy

Characterisation of the surface topography, tomography and chemistry of fretting corrosion product found on retrieved polished femoral stems ⬇️

artículo científico publicado en 2013

Characterization and corrosion behavior of high-chromium white cast irons

article by Anne Neville et al published August 2006 in Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science

Characterization of chemically bonded composite sol–gel based alumina coatings on steel substrates

article published in 2004

Characterizing the microstructure and mechanical and electrochemical properties of novel ceramic/polymer sandwich structural coatings

Coatings tribology drivers for high density plasma technologies

Combined Inhibitors - A New Experimental Method for a Simultaneous Assessment of Scale and Corrosion Phenomena

Comparing the performance of HIPed and Cast Stellite 6 alloy in liquid–solid slurries

Comparison of characteristic of anti-scaling coating for subsurface safety valve for use in oil and gas industry

Comparison of corrosion behaviour for X-65 carbon steel in supercritical CO2-saturated water and water-saturated/unsaturated supercritical CO2

Comparisons of corrosion behaviour for X65 and low Cr steels in high pressure CO2-saturated brine

artículo científico publicado en 2020

Compatibility between tribological surfaces and lubricant additives—How friction and wear reduction can be controlled by surface/lube synergies

article

Corrosion and Erosion-Corrosion Processes of Metal-Matrix Composites in Slurry Conditions

Corrosion and erosion damage mechanisms during erosion–corrosion of WC–Co–Cr cermet coatings

Corrosion and mechanical properties

Corrosion and synergy in a WCCoCr HVOF thermal spray coating—understanding their role in erosion–corrosion degradation

Corrosion and tribocorrosion of hafnium in simulated body fluids ⬇️

artículo científico publicado en 2013

Corrosive–Abrasive Wear Induced by Soot in Boundary Lubrication Regime ⬇️

Cracking mechanism in API 5L X65 steel in a CO2-saturated environment

artículo científico publicado en 2019

Crevice corrosion of biomedical alloys: a novel method of assessing the effects of bone cement and its chemistry

artículo científico publicado en 2013

DLC-W coatings tested in combustion engine — Frictional and wear analysis

article published in 2014

Degradation mechanisms of Co-based alloy and WC metal–matrix composites for drilling tools offshore

Deposition of Inorganic Carbonate, Sulfate, and Sulfide Scales on Antifouling Surfaces in Multiphase Flow ⬇️

Design of an elbow for integrated gravimetric, electrochemical and acoustic emission measurements in erosion-corrosion pipe flow environments

artículo científico publicado en 2019

Designing new lubricant additives using biomimetics

Determination of particle impacts and impact energy in the erosion of X65 carbon steel using acoustic emission technique

Developing diamond MMCs to improve durability in aggressive abrasive conditions

Development and evaluation of miniature electrodes for electrochemical measurements in a CO2 top of line corrosion environment

artículo científico publicado en 2019

Development of a new mechano-chemical model in boundary lubrication ⬇️

article

Development of a novel in-situ technique for hydrogen uptake evaluation from a lubricated tribocontact ⬇️

article

Development of a novel once-through flow visualization technique for kinetic study of bulk and surface scaling ⬇️

artículo científico publicado en 2017

Development of an automated underwater abrasion rig to determine galvanic effects during the growth and localised breakdown of surface films in CO2-containing solutions

artículo científico publicado en 2019

Development of an electrochemically integrated SR-GIXRD flow cell to study FeCO3 formation kinetics. ⬇️

artículo científico publicado en 2016

Development of anti-icing materials by chemical tailoring of hydrophobic textured metallic surfaces

artículo científico publicado en 2012

Development of valve train rig for assessment of cam/follower tribochemistry ⬇️

article

Dissolution behaviour of silicon nitride coatings for joint replacements ⬇️

artículo científico publicado en 2016

Editorial ⬇️

February 2014 column in Tribology - Materials, Surfaces & Interfaces

Effect of Corrosion and Biofilm on Friction Behavior in Biotribocorrosion System for Metal-on-Metal Hip Prosthesis

Effect of Friction Modifiers and Antiwear Additives on the Tribological Performance of a Hydrogenated DLC Coating

Effect of Low Salinity on the Oil Desorption Efficiency from Calcite and Silica Surfaces ⬇️

Effect of Lubricant Additives on the WDLC Coating Structure When Tested in Boundary Lubrication Regime ⬇️

Effect of ageing on lubricants’ physical and chemical properties and tribological performance

artículo científico publicado en 2019

Effect of base oil polarity on the micropitting behaviour in rolling‐sliding contacts

Effect of lubricant ageing on lubricants’ physical and chemical properties and tribological performance; Part I: effect of lubricant chemistry ⬇️

Effect of metallic nanoparticles on the biotribocorrosion behaviour of Metal-on-Metal hip prostheses

article published in 2009

Effect of oil additives on the durability of hydrogenated DLC coating under boundary lubrication conditions

Effect of particle roughness on the bulk deformation using coupled boundary element and discrete element methods

artículo científico publicado en 2019

Effect of slide to roll ratio on the micropitting behaviour in rolling-sliding contacts lubricated with ZDDP-containing lubricants ⬇️

Effect of temperature on the critical water content for general and localised corrosion of X65 carbon steel in the transport of supercritical CO 2 ⬇️

Effect of transition rate and propargyl alcohol concentration on the corrosion of carbon steel during transitions in fluid composition from inhibited hydrochloric acid to sodium chloride brine

artículo científico publicado en 2020

Effect of tribological factors on wet adhesion of a microstructured surface to peritoneal tissue

artículo científico publicado en 2011

Effect of water on ZDDP anti-wear performance and related tribochemistry in lubricated steel/steel pure sliding contacts

Effects of Substrate Bias on Tribological Properties of Diamondlike Carbon Thin Films Deposited Via Microwave-Excited Plasma-Enhanced Chemical Vapor Deposition

article

Effects of Using Alternative Extreme Pressure (EP) and Anti-Wear (AW) Additives with Oxy-Nitrided Samples ⬇️

Effects of carboxylic polyelectrolytes on the growth of calcium carbonate

article published in 2011

Effects of laser surface melting on erosion–corrosion of X65 steel in liquid–solid jet impingement conditions ⬇️

Efficiency assessment of inhibitors on CaCO3 precipitation kinetics in the bulk and deposition on a stainless steel surface (316L)

Electrochemical and mechanical interactions during erosion–corrosion of a high-velocity oxy-fuel coating and a stainless steel

Electrochemical assessment of erosion–corrosion of commercially pure titanium and a titanium alloy in slurry impingement

scholarly article by Anne Neville & B A B McDougall published 1 February 2002 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications

Electrochemical instrumentation of a hip simulator: a new tool for assessing the role of corrosion in metal-on-metal hip joints.

artículo científico publicado en 2010

Electrochemical investigation of corrosion and wear interactions under fretting conditions

Electrodeposition of a calcareous layer: Effects of green inhibitors

article published in 2009

Empirical Prediction of Carbon-Steel Degradation Rates on an Offshore Oil and Gas Facility: Predicting CO2 Erosion-Corrosion Pipeline Failures Before They Occur

Erosion resistance of surface engineered 6000 series aluminium alloy ⬇️

Erosion-corrosion interactions of X65 carbon steel in aqueous CO2 environments ⬇️

Erosion– and cavitation–corrosion of titanium and its alloys

scholarly article by Anne Neville & B.A.B. McDougall published October 2001 in Wear

Erosion–corrosion behaviour of WC-based MMCs in liquid–solid slurries

Erosion–corrosion behaviour of high-velocity oxy-fuel Ni–Cr–Mo–Si–B coatings under high-velocity seawater jet impingement

Erosion–corrosion behaviour of lean duplex stainless steels in 3.5% NaCl solution

Erosion–corrosion degradation mechanisms of Fe–Cr–C and WC–Fe–Cr–C PTA overlays in concentrated slurries

article

Erosion–corrosion mitigation by corrosion inhibitors—An assessment of mechanisms

Erosion–corrosion of engineering steels—Can it be managed by use of chemicals?

Evaluating Inhibitor Performance in CO2-Saturated Erosion-Corrosion Environments

Evaluation and characterization of anti-corrosion properties of sol-gel coating in CO 2 environments ⬇️

Evaluation of high shear inhibitor performance in CO 2 -containing flow-induced corrosion and erosion-corrosion environments in the presence and absence of iron carbonate films ⬇️

article published in 2018

Evaluation of laboratory techniques for assessing scale inhibition efficiency

Evidence for the dissolution of molybdenum during tribocorrosion of CoCrMo hip implants in the presence of serum protein ⬇️

artículo científico publicado en 2016

Evolution and characterization of the film formed on super 13Cr stainless steel in CO2-saturated formation water at high temperature

artículo científico publicado en 2020

Examining corrosion effects and corrosion/erosion interactions on metallic materials in aqueous slurries

Experimental Research on Erosion and Corrosion of WC-Base Matrix Materials for Drill Bits under Impingement of Drilling Muds

Experimental investigation of scaling control by a non-phosphorous polymer: polyaspartic acid

Experimental observation of zinc dialkyl dithiophosphate (ZDDP)-induced iron sulphide formation ⬇️

Exploring the erosive wear of X65 carbon steel by acoustic emission method ⬇️

Extreme Pressure Lubricant Additives Interacting on the Surface of Steel- and Tungsten Carbide–Doped Diamond-Like Carbon

scholarly article by K. K. Mistry et al published July 2013 in Tribology Transactions

Failure analysis of 3D printed woven composite plates with holes under tensile and shear loading

artículo científico publicado en 2020

Failure analysis of cemented metal-on-metal total hip replacements from a single centre cohort ⬇️

article

First international conference on abrasive processes (ICAP2008)

article

Flow cell apparatus for quantitative evaluation of carbon steel corrosion during transitions in fluid composition: Application to transition from inhibited hydrochloric acid to sodium chloride brine ⬇️

article

Fretting corrosion characteristics of polished collarless tapered stems in a simulated biological environment

Fretting corrosion of CoCr alloy: Effect of load and displacement on the degradation mechanisms ⬇️

artículo científico publicado en 2016

Fretting corrosion of fully cemented polished collarless tapered stems: The influence of PMMA bone cement ⬇️

Fretting corrosion of hafnium in simulated body fluids ⬇️

scholarly article by J. Rituerto Sin et al published July 2014 in Tribology International

Fretting of CoCrMo and Ti6Al4V alloys in modular prostheses ⬇️

Fretting-corrosion at the modular tapers interface: Inspection of standard ASTM F1875-98. ⬇️

artículo científico publicado en 2018

Friction and its importance in fuel economy—probing the nanoscale characteristics of surfaces in order to understand lubricant/surface interactions

article by Anne Neville et al published 11 August 2008 in Journal of Physics: Condensed Matter

Friction and wear mechanisms in boundary lubricated oxy-nitrided treated samples ⬇️

Friction characteristics of trocars in laparoscopic surgery. ⬇️

artículo científico publicado en 2015

Friction in nature

Friction modelling in an engine valve train considering the sensitivity to lubricant formulation

Friction modelling of tribofilm performance in a bench tribometer for automotive engine lubricants

Friction reduction mechanisms in boundary lubricated W-doped DLC coatings ⬇️

From Macroscopic to Microscopic: Experimental and Computational Methods to Investigate Bio-tribology

artículo científico publicado en 2019

Galvanically enhanced fretting-crevice corrosion of cemented femoral stems. ⬇️

artículo científico publicado en 2014

Gas Plasma Treatment of Polypropylene Dental Tape

Gas plasma treatments of polypropylene tape

Guest Editorial

Hydrogen influence on material interaction with ZDDP and MoDTC lubricant additives

Impact of Corrosion on Fretting Damage of Electrical Contacts ⬇️

Impact of silica nanoparticles on the morphology and mechanical properties of sol-gel derived coatings ⬇️

article published in 2018

Improved anti-shudder performance of ATFs—Influence of a new friction modifier and surface chemistry

In situ synchrotron XAS study of the decomposition kinetics of ZDDP triboreactive interfaces ⬇️

scholarly article in RSC Advances, vol. 8 no. 59, 2018

In-Situ SAXS/WAXS and Turbidity Studies of the Structure and Composition of Multihomologousn-Alkane Waxes Crystallized in the Absence and Presence of Flow Improving Additive Species

article

In-situ electrochemical study of interaction of tribology and corrosion in artificial hip prosthesis simulators

In-situ friction and wear responses of WS 2 films to space environment: Vacuum and atomic oxygen ⬇️

article

In-situ monitoring the inhibiting effect of polyphosphinocarboxylic acid on CaCO 3 scale formation by synchrotron X-ray diffraction

Incorporating corrosion measurement in hip wear simulators: An added complication or a necessity? ⬇️

artículo científico publicado en 2016

Influence of Mg 2 + on CaCO 3 formation—bulk precipitation and surface deposition

Influence of PPCA inhibitor on CaCO3 scale surface deposition and bulk precipitation at elevated temperature

article

Influence of friction modifier and antiwear additives on the tribological performance of a non-hydrogenated DLC coating

article

Influence of silica nanoparticles on corrosion resistance of sol-gel based coatings on mild steel ⬇️

Inhibition of Flow-Induced Corrosion and Erosion-Corrosion for Carbon Steel Pipe Work from an Offshore Oil and Gas Facility

Initial Stages of Barium Sulfate Formation at Surfaces in the Presence of Inhibitors

scholarly article by Eleftheria Mavredaki et al published 2 November 2011 in Crystal Growth & Design

Initiation and propagation of localised corrosion on stainless steels in seawater containing high biocide concentrations

Inorganic mineral precipitation from potable water on heat transfer surfaces

artículo científico publicado en 2020

Insights into electrodeposition of an inhibitor film and its inhibitive effects on calcium carbonate deposition

artículo científico publicado en 2002

Interaction of DLC and B4C coatings with fully formulated oils in boundary lubrication conditions ⬇️

Interactive Effect between Organic Friction Modifiers and Additives on Friction at Metal Pushing V-Belt CVT Components ⬇️

article

Internal corrosion of carbon steel pipelines for dense-phase CO2transport in carbon capture and storage (CCS) – a review ⬇️

article

Introduction to the 43 rd Leeds-Lyon Symposium on Tribology 2016 special issue “Tribology (The Jost Report – 50 years on)” ⬇️

Investigating pitting in X65 carbon steel using potentiostatic polarisation ⬇️

Investigating the Influence of Friction and Material Wear on Triboelectric Charge Transfer in Metal–Polymer Contacts

artículo científico publicado en 2022

Investigation of adhesion forces at the peritoneal surface

Investigation of pure sliding and sliding/rolling contacts in a DLC/Cast iron system when lubricated in oils containing MoDTC-Type friction modifier ⬇️

artículo científico

Investigation of the effect of a diamine-based friction modifier on micropitting and the properties of tribofilms in rolling-sliding contacts ⬇️

Investigation of the interactions between a novel, organic anti-wear additive, ZDDP and overbased calcium sulphonate

article

Ion release during fretting at taper joint interface of hip joint prosthesis

Iron Calcium Carbonate Instability: Structural Modification of Siderite Corrosion Films

scientific article published on 14 October 2020

Iron carbonate formation kinetics onto corroding and pre-filmed carbon steel surfaces in carbon dioxide corrosion environments ⬇️

Kinetics study of barium sulphate surface scaling and inhibition with a once-through flow system ⬇️

Lead sulfide scaling in multiphase systems and co-precipitation in the presence of calcium carbonate

artículo científico publicado en 2020

Linking electrochemical corrosion behaviour and corrosion mechanisms of thermal spray cermet coatings (WC–CrNi and WC/CrC–CoCr)

Liquid infused porous surfaces for mineral fouling mitigation ⬇️

artículo científico publicado en 2014

Locomotion Selection and Mechanical Design for a Mobile Intra-abdominal Adhesion-Reliant Robot for Minimally Invasive Surgery

Lubricant/surface interactions under extreme pressure conditions: Corrosion inhibitor interacting extreme pressure/anti-wear additives on steel surface

article by K K Mistry et al published March 2008 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Lubrication of aluminium–silicon surfaces with ZDDP and detergents

Lubrication of soft oral surfaces ⬇️

Lubricious ionic polymer brush functionalised silicone elastomer surfaces ⬇️

Measuring tappet rotation in a valvetrain rig when lubricated in a fully formulated oil containing MoDTC-type friction modifier ⬇️

Mechanism of tribofilm formation on Ti6Al4V oxygen diffusion layer in a simulated body fluid. ⬇️

artículo científico publicado en 2017

Mechanisms and Kinetics of WC-Co-Cr High Velocity Oxy-Fuel Thermal Spray Coating Degradation in Corrosive Environments

article published in 2006

Mechanisms of Erosion-Corrosion on a Cobalt-Base Alloy and Stainless-Steel UNS S17400 in Aggressive Slurries

scholarly article by M. Reyes & Anne Neville published 1 December 2001 in Journal of Materials Engineering and Performance

Mechanisms of wear on a Co-base alloy in liquid–solid slurries

article published in 2000

Mo and W as alloying elements in Co-based alloys—their effects on erosion–corrosion resistance

MoDTC Tribochemistry in Steel/Steel and Steel/Diamond-Like-Carbon Systems Lubricated With Model Lubricants and Fully Formulated Engine Oils ⬇️

Modelling the evolution of electrochemical current in potentiostatic condition using an asperity-scale model of tribocorrosion

Modelling the tribo-corrosion interaction in aqueous sliding conditions

article

Modelling tribochemistry in the mixed lubrication regime ⬇️

New insight into the relation between bulk precipitation and surface deposition of calcium carbonate mineral scale

New insights on the decomposition mechanism of Molybdenum DialkyldiThioCarbamate (MoDTC): a Raman spectroscopic study ⬇️

scholarly article by Doris N. Khaemba et al published 2016 in RSC Advances

Non-ferrous coating/lubricant interactions in tribological contacts: Assessment of tribofilms

article

Numerical Study of the Effect of Tribofilm Kinetics and Its Hardness on the Roughness Evolution of the Substrate in Boundary Lubrication Regime

On the Transient Decomposition and Reaction Kinetics of Zinc Dialkyldithiophosphate

artículo científico publicado en 2018

Oxygen Diffusion Layer on Ti–6Al–4V Alloy: Scratch and Dry Wear Resistance

Pitting Behaviour of Lean Duplex Stainless Steels in Marine and Oilfield Environments

Pitting and Uniform Corrosion of X65 Carbon Steel in Sour Corrosion Environments: The Influence of CO2, H2S, and Temperature ⬇️

Pore-Scale Displacement Efficiency during Different Salinity Water Flooding in Hydrophilic and Hydrophobic Microstructures

Prediction and Evaluation of Calcium Carbonate Deposition at Surfaces

Preparation of Magnetic Carboxymethylchitosan Nanoparticles for Adsorption of Heavy Metal Ions ⬇️

artículo científico publicado en 2016

Probing the morphology of polypropylene fibres by scanning probe microscopy

article

Progressing the understanding of chemical inhibition of mineral scale by green inhibitors

article by A. Martinod et al published March 2008 in Desalination

Protectiveness, morphology and composition of corrosion products formed on carbon steel in the presence of Cl−, Ca2+ and Mg2+ in high pressure CO2 environments ⬇️

article

Quantitative assessment of colorectal morphology: Implications for robotic colonoscopy ⬇️

artículo científico publicado en 2016

Reactivity of oil‐soluble IL with silicon surface at elevated temperature

Real-Time Measurement of the Tool-Tissue Interaction in Minimally Invasive Abdominal Surgery: The First Step to Developing the Next Generation of Smart Laparoscopic Instruments ⬇️

artículo científico publicado en 2016

Real-time corrosion measurements to assess biotribocorrosion mechanisms with a hip simulator

article by Yu Yan et al published July 2013 in Tribology International

Relating iron carbonate morphology to corrosion characteristics for water-saturated supercritical CO2 systems

Relaxation and Recovery of Colon After Application of a Mechanical Stress

Repressing oxidative wear within Si doped DLCs ⬇️

Response of reinforced concrete beams to hydrostatic pressure acting within primary cracks

Reviewing the technological challenges associated with the development of a laparoscopic palpation device

artículo científico

Rheological behavior of multiwalled carbon nanotube-imidazolium tosylate ionic liquid dispersions ⬇️

Robotic platforms for general and colorectal surgery

artículo científico publicado en 2011

Role of friction modifiers on the tribological performance of hypereutectic Al–Si alloy lubricated in boundary conditions

article published in 2011

RollerBall: A mobile robot for intraluminal locomotion ⬇️

article published in 2016

Siderite micro-modification for enhanced corrosion protection ⬇️

scholarly article

Single cam tribometer for evaluating tribological parameters and tribochemistry of DLC coated valve train follower

Single-asperity study of the reaction kinetics of P-based triboreactive films ⬇️

Special Issue of Tribology – Materials, Surfaces & Interfaces containing selected papers presented at the 4th International Colloquium 'Micro-Tribology 2005', September 4–8, 2005, Karwica, Poland

article

Special Issue on Biomimetics in Engineering

Static Friction Modeling in the Presence of Soft Thin Metallic Films

Study of the Interfacial Mechanism of ZDDP Tribofilm in Humid Environment and its Effect on Tribochemical Wear; Part II: Numerical ⬇️

Study of the ZDDP Antiwear Tribofilm Formed on the DLC Coating Using AFM and XPS Techniques

article

Study of the interfacial mechanism of ZDDP tribofilm in humid environment and its effect on tribochemical wear; Part I: Experimental ⬇️

Subscale Tribofilm Tribological Modelling in Boundary Lubrication Using Multivariate Analysis

Substrate effect on surface adhesion/crystallisation of calcium carbonate

Surface Fatigue Behavior of a WC/aC:H Thin-Film and the Tribochemical Impact of Zinc Dialkyldithiophosphate

artículo científico publicado en 2019

Surface Reaction Films from Amine-Based Organic Friction Modifiers and Their Influence on Surface Fatigue and Friction

Surface Scaling in the Oil and Gas Sector: Understanding the Process and Means of Management

Surface and Tribological Characteristics of Tribofilms Formed in the Boundary Lubrication Regime with Application to Internal Combustion Engines

article

Surface and subsurface changes as a result of tribocorrosion at the stem-neck interface of bi-modular prosthesis ⬇️

scholarly article published June 2017

Surface inorganic scale formation in oil and gas industry: As adhesion and deposition processes ⬇️

Surface interactions and tribochemistry in boundary lubrication of hypereutectic aluminium—silicon alloys

scholarly article by A E Jiménez et al published 16 January 2009 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Surgical innovations: Addressing the technology gaps in minimally invasive surgery

article

Synovial joint lubrication — does nature teach more effective engineering lubrication strategies? ⬇️

Synthesis and tribological testing of poly(methyl methacrylate) particles containing encapsulated organic friction modifier ⬇️

Systematic approach for morphological analysis of worn surfaces

Technological assessment of the biogalvanic method for tissue characterization. ⬇️

artículo científico publicado en 2014

The Compatibility of Crankcase Lubricant–Material Combinations in Internal Combustion Engines

The Effect of Film Thickness on Initial Friction of Elastic-Plastically Rough Surface With a Soft Thin Metallic Film

The Effect of Post-Treatment of a High-Velocity Oxy-Fuel Ni-Cr-Mo-Si-B Coating Part 2: Erosion-Corrosion Behavior

The Effect of Post-Treatment of a High-Velocity Oxy-Fuel Ni-Cr-Mo-Si-B Coating Part I: Microstructure/Corrosion Behavior Relationships

The Influence of pH on Localized Corrosion Behavior of X65 Carbon Steel in CO2-Saturated Brines

The composition of tribofilms produced on metal-on-metal hip bearings ⬇️

artículo científico publicado en 2013

The early stages of FeCO 3 scale formation kinetics in CO 2 corrosion ⬇️

The effect of MoDTC-type friction modifier on the wear performance of a hydrogenated DLC coating ⬇️

The effect of O 2 content on the corrosion behaviour of X65 and 5Cr in water-containing supercritical CO 2 environments ⬇️

article published in 2015

The effect of soot and diesel contamination on wear and friction of engine oil pump ⬇️

The electrochemical response of stainless steels in liquid–solid impingement

article

The evolution of subsurface micro-structure and tribo-chemical processes in cocrmo-ti6al4v fretting-corrosion contacts: What lies at and below the surface?

article by A. Oladokun et al published December 2019 in Wear

The formation of FeCO3 and Fe3O4 on carbon steel and their protective capabilities against CO2 corrosion at elevated temperature and pressure

The impact of electrode resistance on the biogalvanic characterisation technique ⬇️

artículo científico publicado en 2016

The influence of SO 2 on the tolerable water content to avoid pipeline corrosion during the transportation of supercritical CO 2 ⬇️

The influence of anti-wear additive ZDDP on doped and undoped diamond-like carbon coatings ⬇️

The influence of high shear and sand impingement on preferential weld corrosion of carbon steel pipework in CO2-saturated environments

The influence of swing phase load on the electrochemical response, friction, and ion release of metal-on-metal hip prostheses in a friction simulator

article

The lubrication of both aluminium–silicon and model silicon surfaces with calcium sulphonate and an organic antiwear additive

article

The multiple roles of a chemical tribofilm in hydrogen uptake from lubricated rubbing contacts

artículo científico publicado en 2020

The mutual interaction between tribochemistry and lubrication: Interfacial mechanics of tribofilm

The role of Ca2+ ions on Ca/Fe carbonate products on X65 carbon steel in CO2 corrosion environments at 80 and 150 °C

The role of surface pre-treatment on the microstructure, corrosion and fretting corrosion of cemented femoral stems ⬇️

The role of surface roughness and slide-roll ratio on the decomposition of MoDTC in tribological contacts ⬇️

The taper corrosion pattern observed for one bi-modular stem design is related to geometry-determined taper mechanics ⬇️

artículo científico publicado en 2017

Transient processes of MoS2tribofilm formation under boundary lubrication ⬇️

Tribo-corrosion analysis of wear and metal ion release interactions from metal-on-metal and ceramic-on-metal contacts for the application in artificial hip prostheses

article

Tribo-corrosion properties of cobalt-based medical implant alloys in simulated biological environments

scholarly article by Yu Yan et al published September 2007 in Wear

Tribochemical Interactions Between Lubricant Additives and Low Hydrogen Containing DLC Coating Under Boundary Lubrication Conditions

Tribochemical Interactions of Friction Modifier and Antiwear Additives With CrN Coating Under Boundary Lubrication Conditions

Tribochemical Interactions of Moly Dimer and ZDDP Additives With CrN Coating and Bearing Steel While Sliding Against Cast Iron in Boundary Lubrication Conditions

Tribochemical study of micropitting in tribocorrosive lubricated contacts: The influence of water and relative humidity ⬇️

Tribochemistry of silicon and oxygen doped, hydrogenated Diamond-like Carbon in fully-formulated oil against low additive oil ⬇️

Tribochemistry on Clutch Friction Material Lubricated by Automatic Transmission Fluids and the Link to Frictional Performance

article

Tribocorrosion in implants—assessing high carbon and low carbon Co–Cr–Mo alloys by in situ electrochemical measurements

Tribocorrosion of hard-on-hard total hip replacements with metal and ceramic counterfaces under standard and adverse loading conditions ⬇️

article by Andrew R. Beadling et al published November 2016 in Tribology International

Tribocorrosion reactions between metal-on-metal and metal-on-polymer surfaces for total hip replacement

Tribofilm formation in biotribocorrosion – does it regulate ion release in metal-on-metal artificial hip joints?

Tribofilms on CoCrMo alloys: Understanding the role of the lubricant

Tribofilms: aspects of formation, stability and removal

article

Tribological Characteristics of Human Vascular Smooth Muscle Cells: The Implication of Disease State on Friction

artículo científico publicado en 2020

Tribological Performance of EP Lubricants with Phosphorus-Based Additives

Tribological performance and tribochemical processes in a DLC/steel system when lubricated in a fully formulated oil and base oil ⬇️

Tribological performance evaluation of a hydrogenated diamond-like carbon coating in sliding/rolling contact – effect of lubricant additives

Tribological performance of an Al—Si alloy lubricated in the boundary regime with zinc dialkyldithiophosphate and molybdenum dithiocarbamate additives ⬇️

scholarly article by X Xia et al published March 2008 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Tribological performance of an H-DLC coating prepared by PECVD ⬇️

Tribological properties of aluminium-clay composites for brake disc rotor applications ⬇️

Tribological response of MoS2 coated and oxy-nitrided samples with alternative extreme pressure and anti-wear additives

Tribology and corrosion in hip joint replacements: materials and engineering*Note: This chapter is an updated version of Chapter 18, from the first edition of Joint replacement technology, edited by P. A. Revell and published by Woodhead Publishing,

Tribology – Materials, Surfaces and Interfaces: the first two years

USING SYNCHROTRON X-RAY DIFFRACTION (SXRD) FOR STUDYING THE BASO[sub 4] FORMATION KINETICS AND THE EFFECT OF INHIBITORS ON BARITE FORMATION

Understanding Friction Behavior in Automatic Transmission Fluid LVFA Test: A New Positive Curve Parameter to Friction Coefficient Ratio Index Evaluation

article

Understanding Pitting Corrosion Behaviour of X-65 Carbon Steel in CO2 Saturated Environments: The Temperature Effect

Understanding the Influence of SO2and O2on the Corrosion of Carbon Steel in Water-Saturated Supercritical CO2 ⬇️

Understanding the composition and low friction tribofilm formation/removal in boundary lubrication

article

Understanding the differences between the wear of metal-on-metal and ceramic-on-metal total hip replacements

artículo científico publicado en 2008

Understanding the friction reduction mechanism based on the molybdenum disulfide tribofilm formation and removal ⬇️

artículo científico publicado en 2018

Understanding the role of corrosion in the degradation of metal-on-metal implants

artículo científico publicado en 2006

Understanding the role of surface textures in improving the performance of boundary additives, part I: Experimental

artículo científico publicado en 2020

Understanding the role of surface textures in improving the performance of boundary additives, part II: Numerical simulations

artículo científico publicado en 2020

Understanding the wear behaviour of non-doped and Si,O-doped diamond-like carbon films ⬇️

scholarly article in RSC Advances, vol. 7 no. 69, 2017

Using In Situ Atomic Force Microscopy to Investigate the Kinetics of Corrosion of WC–Co–Cr Cermet Coatings Applied by High-Velocity Oxy-Fuel

Using a Real-Time Visualisation Technique for the Assessment of Surface Scale Kinetics and Mechanisms of Inhibition

Using in situ synchrotron radiation wide angle X-ray scattering (WAXS) to study CaCO3 scale formation at ambient and elevated temperature

artículo científico publicado en 2007

Variation of Top of Line Corrosion Rates at Different Positions in Pipe

Vertically constructed monolithic electrodes for sodium ion batteries: toward low tortuosity and high energy density

Wear Mechanisms of Hydrogenated DLC in Oils Containing MoDTC ⬇️

Wet adhesion for a miniature mobile intra-abdominal device based on biomimetic principles

ZDDP and MoDTC interactions and their effect on tribological performance – tribofilm characteristics and its evolution

ZDDP and MoDTC interactions in boundary lubrication—The effect of temperature and ZDDP/MoDTC ratio

ZDDP and its interactions with an organic antiwear additive on both aluminium–silicon and model silicon surfaces

article

Zinc dialkyl dithiophosphate antiwear tribofilm and its effect on the topography evolution of surfaces: A numerical and experimental study ⬇️