A Novel Method to Investigate the Principles of Impact Welding: Development and Enhancement of a Test Rig, Experimental and Numerical Results

A transmission electron microscopy procedure for in-situ straining of miniature pseudoelastic NiTi specimens

article

Acellularization-Induced Changes in Tensile Properties Are Organ Specific - An In-Vitro Mechanical and Structural Analysis of Porcine Soft Tissues

artículo científico publicado en 2016

An experimental and numerical investigation of different shear test configurations for sheet metal characterization

An experimental study on optimum lubrication for large-scale severe plastic deformation of aluminum-based alloys

scholarly article by P. Frint et al published January 2017 in Journal of Materials Processing Technology

Back Flow Creep Phenomena in Short Fibre Reinforced Aluminium Alloys

artículo científico publicado en 2002

Back Flow Creep Phenomena in Short Fibre Reinforced Aluminium Alloys

artículo científico publicado en 2002

Cryogenic forming of AA7075 by Equal-Channel Angular Pressing

Design of a Medical Non-Linear Drilling Device: The Influence of Twist and Wear on the Fatigue Behaviour of NiTi Wires Subjected to Bending Rotation

article

Development of Unconventional Processing of Steels in Semi-Solid State

Development of a novel test rig to investigate the fundamentals of impact welding

article

Do cells contribute to tendon and ligament biomechanics?

artículo científico publicado en 2014

Effect of Creep and Aging on the Precipitation Kinetics of an Al-Cu Alloy after One Pass of ECAP

Effect of Input Structure of Blank on Development of Final Structure when Processing at Temperatures between Solidus and Liquidus

Effect of Ni4Ti3 precipitation on martensitic transformation in Ti–Ni

article published in 2010

Effect of SiC-Reinforcement and Equal-Channel Angular Pressing on Microstructure and Mechanical Properties of AA2017

Effect of low-temperature precipitation on the transformation characteristics of Ni-rich NiTi shape memory alloys during thermal cycling

Einfluss von ECAP und Wärmebehandlung auf Mikrostruktur und mechanische Eigenschaften einer SiC-verstärkten AlCu-Legierung. Effect of ECAP and heat treatment on microstructure and mechanical properties of a SiC reinforced Al-Cu alloy

Elastic deformation of twinned microstructures

artículo científico publicado en 2017

Erfassung von Effekten beim Skalieren von ECAP am Beispiel einer 6000er Aluminiumlegierung. Scaling up the equal-channel angular pressing process - a study on a 6000 aluminium alloy

Experimentelle Untersuchung und numerische Simulation des inkrementellen Umformverhaltens von Stahl 42CrMo4. Experimental investigation and numerical simulation of the incremental deformation of a 42CrMo4 steel

Fatigue crack propagation in an ECAP-processed aluminium alloy - influence of shear plane orientation

article

Finite Element Simulation of the Presta Joining Process for Assembled Camshafts: Application to Aluminum Shafts

scholarly article by Robert Scherzer et al published 11 February 2018 in Metals

Gradierte Metallstrukturen mit Kunststoffanbindungen

Grain-boundary sliding in a TiAl alloy with fine-grained duplex microstructure during 750°C creep

Growth, microstructure and thermal transformation behaviour of epitaxial Ni-Ti films

Hard X-ray studies of stress-induced phase transformations of superelastic NiTi shape memory alloys under uniaxial load

High temperature and dynamic testing of AHSS for an analytical description of the adiabatic cutting process

article

High-strength aluminum-based light-weight materials for safety components – recent progress by microstructural refinement and particle reinforcement

scholarly article by Matthias Hockauf et al published January 2012 in International Journal of Materials Research

Hydrogen embrittlement of a quenching and partitioning steel during corrosion and zinc electroplating

scholarly article

In-plane biaxial compression and tension testing of thin sheet materials

In-situ diffraction investigation of superelastic NiTi shape memory alloys under mechanical stress with neutrons and with synchrotron radiation

Influence of Extrusion Temperature on the Aging Behavior and Mechanical Properties of an AA6060 Aluminum Alloy

scholarly article by Nadja Berndt et al published 12 January 2018 in Metals

Influence of Ni on martensitic phase transformations in NiTi shape memory alloys

Influence of metastable retained austenite on macro and micromechanical properties of steel processed by the Q&P process

Influence of precipitates on low-cycle fatigue and crack growth behavior in an ultrafine-grained aluminum alloy

article

Influence of strain gradients on the grain refinement during industrial scale ECAP

article published in 2011

Influence of thermally activated processes on the deformation behavior during low temperature ECAP

Investigation of the phase evolution in a super-elastic NiTi shape memory alloy (50.7at.%Ni) under extensional load with synchrotron radiation

Investigation of the stress-induced martensitic transformation in pseudoelastic NiTi under uniaxial tension, compression and compression–shear

Lattice stability, elastic constants and macroscopic moduli of NiTi martensites from first principles

Microstructural Evolution and Mechanical Properties of β-Titanium Ti-lOV-2Fe-3Al during Incremental Forming

article

Microstructural Evolution during Severe Plastic Deformation by Gradation Extrusion

Microstructural Features and Mechanical Properties after Industrial Scale ECAP of an Al 6060 Alloy

Microstructural anisotropy, uniaxial and biaxial creep behavior of Ti–45Al–5Nb–0.2B–0.2C

Microstructural characterisation of interfaces in magnetic pulse welded aluminum/aluminum joints

scholarly article by S Sharafiev et al published March 2016 in IOP Conference Series: Materials Science and Engineering

Microstructural evolution during multiaxial deformation of pseudoelastic NiTi studied by first-principles-based micromechanical modeling

Microstructural evolution during uniaxial tension-compression in-plane deformation of an IF steel

artículo científico publicado en 2019

Microstructure and Mechanical Behavior of a Mini-Thixoformed Tool Steel

Microstructure and mechanical properties of an AA6060 aluminum alloy after cold and warm extrusion

article

Mini-Thixoforming of a Steel Produced by Powder Metallurgy

Modification of metastable microstructure of CPM15V steel by heat exposure after treatment in semi-solid state

Near-Threshold Fatigue Crack Propagation in an ECAP-Processed Ultrafine-Grained Aluminium Alloy

article

Obtaining a TRIP microstructure by thermomechanical treatment without isothermal holding

On the PLC Effect in a Particle Reinforced AA2017 Alloy

On the crystallographic anisotropy of nanoindentation in pseudoelastic NiTi

On the development of an intrinsic hybrid composite

article

On the effect of incremental forming on alpha phase precipitation and mechanical behavior of beta-Ti-10V-2Fe-3Al

article

Optimisation of thermo mechanical treatments using cryogenic rolling and aging of the high strength aluminium alloy AlZn5.5MgCu (AA7075). Optimierung der thermomechanischen Behandlung am Beispiel der hochfesten Aluminiumlegierung AlZn5,5MgCu mittels

Particle Ejection by Jetting and Related Effects in Impact Welding Processes

artículo científico publicado en 2020

Phase volume fractions and strain measurements in an ultrafine-grained NiTi shape-memory alloy during tensile loading

article by M.L. Young et al published April 2010 in Acta Materialia

Piezoresistive characterization of multi-walled carbon nanotube-epoxy based flexible strain sensitive films by impedance spectroscopy

Quantification of material slippage in the iliotibial tract when applying the partial plastination clamping technique

artículo científico publicado en 2015

Reducing the nucleation barrier in magnetocaloric Heusler alloys by nanoindentation

article published in 2016

Scaling up Segal's principle of Equal-Channel Angular Pressing

Strain Localization during Equal-Channel Angular Pressing Analyzed by Finite Element Simulations

Strain Localization during Equal-Channel Angular Pressing analyzed by Finite Element Simulations

Strain rate effects on the localization of the stress-induced martensitic transformation in pseudoelastic NiTi under uniaxial tension, compression and compression–shear

Strain-rate sensitive ductility in a low-alloy carbon steel after quenching and partitioning treatment

artículo científico publicado en 2019

Structural and functional fatigue of NiTi shape memory alloys

article

Structural fatigue of pseudoelastic NiTi shape memory wires

article

Technical-economic evaluation of severe plastic deformation processing technologies—methodology and use case of lever-arm-shaped aircraft lightweight components

The Potential of Powder Metallurgy for the Fabrication of Biomaterials on the Basis of Nickel-Titanium: A Case Study with a Staple Showing Shape Memory Behaviour

scholarly article by L. Krone et al published July 2005 in Advanced Engineering Materials

The influence of temperature on lattice parameters of coexisting phases in NiTi shape memory alloys—a neutron diffraction study

article published in 2004

The role of backpressure during large scale Equal-Channel Angular Pressing

Thermomechanische Optimierung mittels ECAP und Wärmebehandlung an einer Aluminiumlegierung der Automobil- und Luftfahrtindustrie. Optimisation of thermo mechanical treatments using ECAP and aging for an aluminium alloy for automotive and aeronautica

Transformation-induced plasticity during pseudoelastic deformation in Ni–Ti microcrystals

article by D.M. Norfleet et al published July 2009 in Acta Materialia

Untersuchungen zum Einfluss von ECAP und Tieftemperaturwalzen auf die mechanischen Eigenschaften der Aluminiumlegierung 7075. Investigation of the influence of ECAP and cryogenic rolling on the mechanical properties of the aluminium alloy 7075

Virtual Extensometer Analysis of Martensite Band Nucleation, Growth, and Strain Softening in Pseudoelastic NiTi Subjected to Different Load Cases

artículo científico publicado en 2018