Lista de obras -

A NIOSH perspective on direct-reading methodologies and real-time monitoring in occupational environments ⬇️

artículo científico publicado en 2022

A cyclone for end of shift silica measurement ⬇️

abstract published in 2016

A multi-cyclone sampling array for the collection of size-segregated occupational aerosols

artículo científico publicado en 2013

A novel sampling cassette for field-based analysis of respirable crystalline silica

artículo científico publicado en 2021

A review of the USBM/NIOSH diesel research program

book or book chapter published in 2010

A review of the effects of exhaust aftertreatment on nitrogen dioxide emissions from underground mining equipment ⬇️

artículo científico publicado en 2010

Advanced Sensor Technologies and the Future of Work ⬇️

NIOSH Science Blog post published in 2021

Advanced sensor technologies and the future of work

journal article published in 2022

Aerosol sensing technologies in the mining industry

conference proceedings item published in 2011

Aerosols and criteria gases in an underground mine that uses FAME biodiesel blends

artículo científico publicado en 2014

Aerosols emitted in underground mine air by diesel engine fueled with biodiesel

artículo científico publicado en 2010

An evaluation of sharp cut cyclones for sampling diesel particulate matter aerosol in the presence of respirable dust

artículo científico publicado en 2014

Analysis of the silica percent in airborne respirable mine dust samples from U.S. operations

conference proceedings item published in 2014

Applying low-cost particulate matter sensors for characterizing occupational exposure; findings from field studies in different industries

abstract published in 2023

Applying sensors for assessment of occupational exposures in epidemiological studies: evaluation of sensors and preliminary findings

abstract published in 2023

Benefits and limitations of field-based monitoring approaches for respirable dust and crystalline silica applied in a sandstone quarry

artículo científico publicado en 2022

Calibration of high flow rate thoracic-size selective samplers

artículo científico publicado en 2016

Carbon monoxide measurement in the tailpipe of diesel-powered underground mining equipment ⬇️

artículo científico publicado en 2011

Center for Direct Reading and Sensor Technologies ⬇️

NIOSH Science Blog post published in 2021

Characterizing Particle Size Distributions of Crystalline Silica in Gold Mine Dust

artículo científico publicado en 2017

Characterizing respirable dust size distribution and submicron silica content in gold mine dust ⬇️

conference proceedings item published in 2017

Choosing the “Right” Fatigue Monitoring and Detection Technology ⬇️

NIOSH Science Blog post published in 2021

Coal dust

chapter published in 2023

Coming Soon to a Workplace Near You: Field-based respirable crystalline silica monitoring ⬇️

NIOSH Science Blog post published in 2018

Complexity of respirable dust found in mining operations as characterized by X-ray diffraction and FTIR analysis

artículo científico

Controlling exposure to diesel emissions in underground mines ⬇️

book published in 2012

Deposition uniformity of coal dust on filters and its effect on the accuracy of FTIR analyses for silica

artículo científico publicado en 2013

Diesel aerosols and gases in underground mines: guide to exposure assessment and control ⬇️

NIOSH publication published in 2011

Diesel aftertreatment control technologies in underground mines: the NO2 issue ⬇️

conference proceedings item published in 2010

Differential activation of RAW 264.7 macrophages by size-segregated crystalline silica

artículo científico publicado en 2016

Direct-on-filter alpha-quartz estimation in respirable coal mine dust using transmission Fourier transform infrared spectrometry and partial least squares regression

artículo científico publicado en 2016

Direct-on-filter analysis for respirable crystalline silica using a portable FTIR instrument ⬇️

NIOSH information circular published in 2022

Effects of a diesel particulate filter regeneration process on aerosols in an underground mine ⬇️

artículo científico publicado en 2012

Effects of diesel exhaust aftertreatment devices on concentrations and size distribution of aerosols in underground mine air

artículo científico publicado en 2009

Effects of sintered metal diesel particulate filter system on diesel aerosols and nitric oxides in mine air ⬇️

conference proceedings item published in 2008

Emissions from a diesel engine using Fe-based fuel additives and a sintered metal filtration system

artículo científico publicado en 2016

Equivalency of PDM3700 and PDM3600 dust monitors

artículo científico publicado en 2024

Evaluating the use of a field-based silica monitoring approach with dust from copper mines

artículo científico publicado en 2018

Evaluation of an improved prototype mini-baghouse to control the release of respirable crystalline silica from sand movers

artículo científico publicado en 2017

Evaluation of diffuse reflection infrared spectrometry for end-of-shift measurement of alpha-quartz in coal dust samples

artículo científico publicado en 2015

Evaluation of high-temperature disposable filter elements in an experimental underground mine ⬇️

conference proceedings item published in 2011

Evaluation of high-temperature disposable filter elements in an experimental underground mine

conference proceedings item published in February 2011

Examination of diesel aftertreatment systems at NIOSH Lake Lynn Laboratory ⬇️

conference proceedings item published in 2007

FAST - Field Analysis of Silica Tool software (version 1.0.8) ⬇️

NIOSH publication published in 2021

In-depth survey report: field evaluation of a NIOSH mini-baghouse assembly for control of silica dust on sand movers ⬇️

field study published in 2015

In-depth survey report: field evaluation of the NIOSH mini-baghouse assembly generation 3 for control of silica dust on sand movers ⬇️

field study published in 2016

Isolated zone evaluation of the Tier 4i diesel engine equipped with an SCR system

conference proceedings item published in 2012

Metrological assessment of a portable analyzer for monitoring the particle size distribution of ultrafine particles

artículo científico publicado en 2014

Monitoring worker exposure to respirable crystalline silica: application for data-driven predictive modeling for end-of-shift exposure assessment

artículo científico publicado en 2022

NIOSH-developed Tools for Monitoring Respirable Crystalline Silica in the Mining Environment ⬇️

NIOSH Science Blog post published in 2024

NO2 Emission Increases Associated with the Use of Certain Diesel Particulate Filters in Underground Mines ⬇️

NIOSH Science Blog post published in 2009

Performance comparison of four portable FTIR instruments for direct-on-filter measurement of respirable crystalline silica

journal article published in 2020

Performance comparison of real-time light scattering dust monitors across dust types and humidity levels

journal article published in 2019

Performance metrics towards adoption and operationalization of aerosol sensors

artículo científico publicado en 2024

Potential concerns with the use of diesel oxidation catalysts in underground mines ⬇️

artículo científico publicado en 2010

Preliminary results on testing a field-based respirable silica monitoring approach in surface copper mines ⬇️

abstract published in 2016

Promoting early exposure monitoring for respirable crystalline silica: taking the laboratory to the mine site

artículo científico publicado en 2016

Quantification of the effects of carbon on filter media in SKC DPM cassettes on measurements of diesel particulate matter in underground mines ⬇️

conference proceedings item published in 2019

Real-time dust monitoring in occupational environments: a case study on using low-cost dust monitors for enhanced data collection and analysis ⬇️

conference proceedings item published in 2024

Real-time dust monitoring in occupational environments: a case study on using low-cost dust monitors for enhanced data collection and analysis

journal article published in 2024

Respirable size-selective sampler for end-of-shift quartz measurement: development and performance

artículo científico publicado en 2016

Right Sensors Used Right: A Life-cycle Approach for Real-time Monitors and Direct Reading Methodologies and Data. A Call to Action for Customers, Creators, Curators, and Analysts. ⬇️

NIOSH Science Blog post published in 2019

Segregation of respirable dust for chemical and toxicological analyses

journal article published in 2021

Setting Objectives for Fatigue Detection Technologies ⬇️

NIOSH Science Blog post published in 2022

Silica adds to respirable dust concerns: what if you could know the silica dust levels in a coal mine after every shift? ⬇️

journal article published in 2016

Tailpipe emissions and ambient concentrations of pollutants from diesel engines during in-use and isolated zone studies

conference proceedings item published in 2012

Testing a revised inlet for the personal dust monitor

journal article published in 2019

The Use of Real-time Respirable Dust Monitors ⬇️

NIOSH Science Blog post published in 2018

The Who, What, How and When of Implementing Fatigue Monitoring and Detection Technologies ⬇️

NIOSH Science Blog post published in 2021

The development and testing of a prototype mini-baghouse to control the release of respirable crystalline silica from sand movers

artículo científico publicado en 2016

The effects of passive diesel particulate filters on diesel particulate matter concentrations in two underground metal/nonmetal mines ⬇️

conference proceedings item published in 2010

The future of respirable silica monitoring - accurate results generated on-site in a few minutes ⬇️

artículo científico publicado en 2017

Toward developing a new occupational exposure metric approach for characterization of diesel aerosols

artículo científico publicado en 2012

Transformation of H&S Real-time Sensors Data into Information and Knowledge: Experiences, Future Needs, and Applied Processes ⬇️

NIOSH Science Blog post published in 2021

Use of the field-based silica monitoring technique in a coal mine: a case study

artículo científico publicado en 2019

Use of the field-based silica monitoring technique in a coal mine: a case study ⬇️

abstract published in 2020

Using core elements of health and safety management systems to support worker well-being during technology integration

journal article published in 2022

Lista de obras de

A NIOSH perspective on direct-reading methodologies and real-time monitoring in occupational environments ⬇️

A cyclone for end of shift silica measurement ⬇️

A multi-cyclone sampling array for the collection of size-segregated occupational aerosols

A novel sampling cassette for field-based analysis of respirable crystalline silica

A review of the USBM/NIOSH diesel research program

A review of the effects of exhaust aftertreatment on nitrogen dioxide emissions from underground mining equipment ⬇️

Advanced Sensor Technologies and the Future of Work ⬇️

Advanced sensor technologies and the future of work

Aerosol sensing technologies in the mining industry

Aerosols and criteria gases in an underground mine that uses FAME biodiesel blends

Aerosols emitted in underground mine air by diesel engine fueled with biodiesel

An evaluation of sharp cut cyclones for sampling diesel particulate matter aerosol in the presence of respirable dust

Analysis of the silica percent in airborne respirable mine dust samples from U.S. operations

Applying low-cost particulate matter sensors for characterizing occupational exposure; findings from field studies in different industries

Applying sensors for assessment of occupational exposures in epidemiological studies: evaluation of sensors and preliminary findings

Benefits and limitations of field-based monitoring approaches for respirable dust and crystalline silica applied in a sandstone quarry

Calibration of high flow rate thoracic-size selective samplers

Carbon monoxide measurement in the tailpipe of diesel-powered underground mining equipment ⬇️

Center for Direct Reading and Sensor Technologies ⬇️

Characterizing Particle Size Distributions of Crystalline Silica in Gold Mine Dust

Characterizing respirable dust size distribution and submicron silica content in gold mine dust ⬇️

Choosing the “Right” Fatigue Monitoring and Detection Technology ⬇️

Coal dust

Coming Soon to a Workplace Near You: Field-based respirable crystalline silica monitoring ⬇️

Complexity of respirable dust found in mining operations as characterized by X-ray diffraction and FTIR analysis

Controlling exposure to diesel emissions in underground mines ⬇️

Deposition uniformity of coal dust on filters and its effect on the accuracy of FTIR analyses for silica

Diesel aerosols and gases in underground mines: guide to exposure assessment and control ⬇️

Diesel aftertreatment control technologies in underground mines: the NO2 issue ⬇️

Differential activation of RAW 264.7 macrophages by size-segregated crystalline silica

Direct-on-filter alpha-quartz estimation in respirable coal mine dust using transmission Fourier transform infrared spectrometry and partial least squares regression

Direct-on-filter analysis for respirable crystalline silica using a portable FTIR instrument ⬇️

Effects of a diesel particulate filter regeneration process on aerosols in an underground mine ⬇️

Effects of diesel exhaust aftertreatment devices on concentrations and size distribution of aerosols in underground mine air

Effects of sintered metal diesel particulate filter system on diesel aerosols and nitric oxides in mine air ⬇️

Emissions from a diesel engine using Fe-based fuel additives and a sintered metal filtration system

Equivalency of PDM3700 and PDM3600 dust monitors

Evaluating the use of a field-based silica monitoring approach with dust from copper mines

Evaluation of an improved prototype mini-baghouse to control the release of respirable crystalline silica from sand movers

Evaluation of diffuse reflection infrared spectrometry for end-of-shift measurement of alpha-quartz in coal dust samples

Evaluation of high-temperature disposable filter elements in an experimental underground mine ⬇️

Evaluation of high-temperature disposable filter elements in an experimental underground mine

Examination of diesel aftertreatment systems at NIOSH Lake Lynn Laboratory ⬇️

FAST - Field Analysis of Silica Tool software (version 1.0.8) ⬇️

In-depth survey report: field evaluation of a NIOSH mini-baghouse assembly for control of silica dust on sand movers ⬇️

In-depth survey report: field evaluation of the NIOSH mini-baghouse assembly generation 3 for control of silica dust on sand movers ⬇️

Isolated zone evaluation of the Tier 4i diesel engine equipped with an SCR system

Metrological assessment of a portable analyzer for monitoring the particle size distribution of ultrafine particles

Monitoring worker exposure to respirable crystalline silica: application for data-driven predictive modeling for end-of-shift exposure assessment

NIOSH-developed Tools for Monitoring Respirable Crystalline Silica in the Mining Environment ⬇️

NO2 Emission Increases Associated with the Use of Certain Diesel Particulate Filters in Underground Mines ⬇️

Performance comparison of four portable FTIR instruments for direct-on-filter measurement of respirable crystalline silica

Performance comparison of real-time light scattering dust monitors across dust types and humidity levels

Performance metrics towards adoption and operationalization of aerosol sensors

Potential concerns with the use of diesel oxidation catalysts in underground mines ⬇️

Preliminary results on testing a field-based respirable silica monitoring approach in surface copper mines ⬇️

Promoting early exposure monitoring for respirable crystalline silica: taking the laboratory to the mine site

Quantification of the effects of carbon on filter media in SKC DPM cassettes on measurements of diesel particulate matter in underground mines ⬇️

Real-time dust monitoring in occupational environments: a case study on using low-cost dust monitors for enhanced data collection and analysis ⬇️

Real-time dust monitoring in occupational environments: a case study on using low-cost dust monitors for enhanced data collection and analysis

Respirable size-selective sampler for end-of-shift quartz measurement: development and performance

Right Sensors Used Right: A Life-cycle Approach for Real-time Monitors and Direct Reading Methodologies and Data. A Call to Action for Customers, Creators, Curators, and Analysts. ⬇️

Segregation of respirable dust for chemical and toxicological analyses

Setting Objectives for Fatigue Detection Technologies ⬇️

Silica adds to respirable dust concerns: what if you could know the silica dust levels in a coal mine after every shift? ⬇️

Tailpipe emissions and ambient concentrations of pollutants from diesel engines during in-use and isolated zone studies

Testing a revised inlet for the personal dust monitor

The Use of Real-time Respirable Dust Monitors ⬇️

The Who, What, How and When of Implementing Fatigue Monitoring and Detection Technologies ⬇️

The development and testing of a prototype mini-baghouse to control the release of respirable crystalline silica from sand movers

The effects of passive diesel particulate filters on diesel particulate matter concentrations in two underground metal/nonmetal mines ⬇️

The future of respirable silica monitoring - accurate results generated on-site in a few minutes ⬇️

Toward developing a new occupational exposure metric approach for characterization of diesel aerosols

Transformation of H&amp;S Real-time Sensors Data into Information and Knowledge: Experiences, Future Needs, and Applied Processes ⬇️

Use of the field-based silica monitoring technique in a coal mine: a case study

Use of the field-based silica monitoring technique in a coal mine: a case study ⬇️

Using core elements of health and safety management systems to support worker well-being during technology integration

Transformation of H&S Real-time Sensors Data into Information and Knowledge: Experiences, Future Needs, and Applied Processes ⬇️