Lista de obras -

Acrylonitrile butadiene styrene (ABS) and polycarbonate (PC) filaments three-dimensional (3-D) printer emissions-induced cell toxicity

artículo científico publicado en 2019

Caution on using tetrahydrofuran for processing crystalline silica samples from engineered stone for XRD analysis

artículo científico publicado en 2022

Characterization of airborne dust generated from the grinding of natural and engineered stone products ⬇️

field study published in 2023

Characterization of the emissions and crystalline silica content of airborne dust generated from grinding natural and engineered stones

artículo científico publicado en 2022

Characterizing dust from cutting Corian®, a solid-surface composite material, in a laboratory testing system

artículo científico publicado en 2016

Comprehensive report: engineering control of silica dust from stone countertop fabrication and installation - evaluation of wetting methods for grinding ⬇️

field study published in 2021

Comprehensive report: evaluation of the dust generation and engineering control for cutting fiber-cement siding ⬇️

field study published in 2014

Comprehensive report: laboratory evaluation of power shears for cutting fiber-cement siding ⬇️

field study published in 2017

Comprehensive report: laboratory evaluation of saw blades for cutting fiber-cement siding ⬇️

field study published in 2019

Contractors Wanted: Help NIOSH Advance Research to Protect Workers from Silica ⬇️

NIOSH Science Blog post published in 2013

Development of portable aerosol mobility spectrometer for personal and mobile aerosol measurement

artículo científico publicado en 2016

Engineering controls for respirable crystalline silica hazards: investigations by NIOSH's Engineering and Physical Hazards Branch ⬇️

artículo científico publicado en 2022

Evaluation of pulmonary effects of 3-D printer emissions from acrylonitrile butadiene styrene using an air-liquid interface model of primary normal human-derived bronchial epithelial cells

artículo científico publicado en 2022

Evaluation of pulmonary effects of 3-D printer emissions from acrylonitrile butadiene styrene using an air-liquid interface model of primary normal human-derived bronchial epithelial cells (dataset) ⬇️

research dataset published in 2022

Evaluation of pulmonary effects of 3D printer emissions from acrylonitrile butadiene styrene using an air-liquid interface model of primary normal human-derived bronchial epithelial cells ⬇️

abstract published in 2022

Evaluation of saw blade designs on controlling dust from cutting fiber-cement

artículo científico

Hazardous dusts from the fabrication of countertop: a review

artículo científico publicado en 2022

Health hazard evaluation report: evaluation of crystalline silica exposure during fabrication of natural and engineered stone countertops ⬇️

field study published in 2016

In vitro toxicity assessment of respirable solid surface composite sawing particles

journal article published in 2020

In vitro toxicity assessment of respirable solid surface composite sawing particles ⬇️

abstract published in 2020

In vivo toxicological assessment of sanding dust generated from micronized copper azole pressure treated wood ⬇️

abstract published in 2017

In-depth survey report: comparison of removing mortar by powered chisels, manual chisels and angle grinders ⬇️

field study published in 2022

In-depth survey report: engineering control of silica dust from stone countertop fabrication and installation ⬇️

field study published in March 2016

In-depth survey report: engineering control of silica dust from stone countertop fabrication and installation ⬇️

field study published in 2016

In-depth survey report: field evaluation of a mobile dust control booth for stone countertop grinding ⬇️

field study published in 2019

In-depth survey report: mixing thinset mortar in a 5 gallon bucket with a dust control ⬇️

field study published in 2018

In-depth survey report: partnering to control dust from fiber-cement siding, City Walk, Woodbury, Minnesota ⬇️

field study published in 2014

In-depth survey report: partnering to control dust from fiber-cement siding, Pebble Creek, Glenview, Illinois ⬇️

field study published in 2014

In-depth survey report: partnering to control dust from fiber-cement siding, St. Mary's Hospital, Greensboro, Georgia ⬇️

field study published in 2013

In-depth survey report: partnering to control dust from fiber-cement siding, Twickenham Square, Huntsville, Alabama ⬇️

field study published in 2014

In-depth survey report: partnering to control dust from fiber-cement siding, Villas of the Valley, Lincoln Heights, Ohio ⬇️

field study published in 2013

In-depth survey report: removing mortar by wet grinders and powered chisels with on-tool local exhaust ventilation ⬇️

field study published in 2021

In-depth survey report: removing mortar with a die grinder with on-tool local exhaust ventilation, International Union of Bricklayers and Allied Craftworkers Southern Ohio-Kentucky Regional Training Center, Batavia, Ohio ⬇️

field study published in 2019

In-depth survey report: removing mortar with a powered chisel with on-tool local exhaust ventilation and a higher-flow vacuum cleaner, International Union of Bricklayers and Allied Craftworkers Southern Ohio-Kentucky Regional Training Center, ... ⬇️

field study published in 2018

In-depth survey report: removing mortar with a powered chisel with on-tool local exhaust ventilation, International Union of Bricklayers and Allied Craftworkers Southern Ohio-Kentucky Regional Training Center, Batavia, Ohio ⬇️

field study published in 2017

In-depth survey report: removing mortar with a powered chisel, International Union of Bricklayers and Allied Craftworkers Southern Ohio-Kentucky Regional Training Center, Batavia, Ohio ⬇️

field study published in 2017

In-depth survey report: removing mortar with a powered mortar-raking chisel with on-tool local exhaust ventilation, International Union of Bricklayers and Allied Craftworkers Southern Ohio-Kentucky Regional Training Center, Batavia, Ohio ⬇️

field study published in 2018

In-depth survey report: removing mortar with a powered saw and modified on-tool hood, International Union of Bricklayers and Allied Craftworkers Southern Ohio-Kentucky Regional Training Center, Batavia, Ohio ⬇️

field study published in 2019

In-depth survey report: removing mortar with a powered saw, International Union of Bricklayers and Allied Craftworkers Southern Ohio-Kentucky Regional Training Center, Batavia, Ohio ⬇️

field study published in 2017

Inhalation exposure of acrylonitrile butadiene styrene filament 3D printer emissions induces pulmonary and systemic toxicity in rats ⬇️

abstract published in 2021

Investigation of ventilation engineering controls for stone countertop fabrication ⬇️

field study published in 2024

Miniature differential mobility analyzer for compact field-portable spectrometers

artículo científico publicado en 2016

Miniature dual-corona ionizer for bipolar charging of aerosol

artículo científico publicado en 2013

Mouse pulmonary response induced by exposure to dust from sawing corian, a solid-surface composite material ⬇️

abstract published in 2019

Mouse pulmonary response to dust from sawing Corian, a solid-surface composite material

artículo científico publicado en 2019

On the characterization of the generation rate and size-dependent crystalline silica content of the dust from cutting fiber cement siding

artículo científico publicado en 2016

Physical chemical properties and cell toxicity of sanding copper-treated lumber

artículo científico publicado en 2018

Physicochemical characterization and in vitro toxicity of emissions from a 3D printer ⬇️

abstract published in 2019

Pulmonary and systemic toxicity in rats following inhalation exposure of 3-D printer emissions from acrylonitrile butadiene styrene (ABS) filament

artículo científico publicado en 2020

Pulmonary exposure to dusts from grinding stone countertop products induces lung inflammation and fibrosis ⬇️

abstract published in 2024

Reducing hazardous dust exposure when cutting fiber-cement siding ⬇️

NIOSH workplace solutions published in 2015

Release of crystalline silica nanoparticles during engineered stone fabrication

journal article published in 2024

Revealing the structural and chemical properties of copper-based nanoparticles released from copper treated wood

artículo científico publicado en 2022

The composition of emissions from sanding Corian® with different sandpapers

artículo científico

The composition of emissions from sawing Corian®, a solid surface composite material

artículo científico publicado en 2019

The generation rate of respirable dust from cutting fiber cement siding using different tools

artículo científico publicado en 2017

Three dimensional (3D) printer emission-induced cell toxicity ⬇️

abstract published in 2018

Three-dimensional printing with nano-enabled filaments releases polymer particles containing carbon nanotubes into air

artículo científico publicado en 2018

Toxicological assessment of dust from sanding micronized copper-treated lumber in vivo

journal article published in 2019

Toxicological evaluation of acrylonitrile butadiene styrene (ABS) 3D printer emissions ⬇️

abstract published in 2020

Unipolar charging based, hand-held mobility spectrometer for aerosol size distribution measurement

artículo científico publicado en 2012

Lista de obras de

Acrylonitrile butadiene styrene (ABS) and polycarbonate (PC) filaments three-dimensional (3-D) printer emissions-induced cell toxicity

Caution on using tetrahydrofuran for processing crystalline silica samples from engineered stone for XRD analysis

Characterization of airborne dust generated from the grinding of natural and engineered stone products ⬇️

Characterization of the emissions and crystalline silica content of airborne dust generated from grinding natural and engineered stones

Characterizing dust from cutting Corian®, a solid-surface composite material, in a laboratory testing system

Comprehensive report: engineering control of silica dust from stone countertop fabrication and installation - evaluation of wetting methods for grinding ⬇️

Comprehensive report: evaluation of the dust generation and engineering control for cutting fiber-cement siding ⬇️

Comprehensive report: laboratory evaluation of power shears for cutting fiber-cement siding ⬇️

Comprehensive report: laboratory evaluation of saw blades for cutting fiber-cement siding ⬇️

Contractors Wanted: Help NIOSH Advance Research to Protect Workers from Silica ⬇️

Development of portable aerosol mobility spectrometer for personal and mobile aerosol measurement

Engineering controls for respirable crystalline silica hazards: investigations by NIOSH's Engineering and Physical Hazards Branch ⬇️

Evaluation of pulmonary effects of 3-D printer emissions from acrylonitrile butadiene styrene using an air-liquid interface model of primary normal human-derived bronchial epithelial cells

Evaluation of pulmonary effects of 3-D printer emissions from acrylonitrile butadiene styrene using an air-liquid interface model of primary normal human-derived bronchial epithelial cells (dataset) ⬇️

Evaluation of pulmonary effects of 3D printer emissions from acrylonitrile butadiene styrene using an air-liquid interface model of primary normal human-derived bronchial epithelial cells ⬇️

Evaluation of saw blade designs on controlling dust from cutting fiber-cement

Hazardous dusts from the fabrication of countertop: a review

Health hazard evaluation report: evaluation of crystalline silica exposure during fabrication of natural and engineered stone countertops ⬇️

In vitro toxicity assessment of respirable solid surface composite sawing particles

In vitro toxicity assessment of respirable solid surface composite sawing particles ⬇️

In vivo toxicological assessment of sanding dust generated from micronized copper azole pressure treated wood ⬇️

In-depth survey report: comparison of removing mortar by powered chisels, manual chisels and angle grinders ⬇️

In-depth survey report: engineering control of silica dust from stone countertop fabrication and installation ⬇️

In-depth survey report: engineering control of silica dust from stone countertop fabrication and installation ⬇️

In-depth survey report: field evaluation of a mobile dust control booth for stone countertop grinding ⬇️

In-depth survey report: mixing thinset mortar in a 5 gallon bucket with a dust control ⬇️

In-depth survey report: partnering to control dust from fiber-cement siding, City Walk, Woodbury, Minnesota ⬇️

In-depth survey report: partnering to control dust from fiber-cement siding, Pebble Creek, Glenview, Illinois ⬇️

In-depth survey report: partnering to control dust from fiber-cement siding, St. Mary's Hospital, Greensboro, Georgia ⬇️

In-depth survey report: partnering to control dust from fiber-cement siding, Twickenham Square, Huntsville, Alabama ⬇️

In-depth survey report: partnering to control dust from fiber-cement siding, Villas of the Valley, Lincoln Heights, Ohio ⬇️

In-depth survey report: removing mortar by wet grinders and powered chisels with on-tool local exhaust ventilation ⬇️

In-depth survey report: removing mortar with a die grinder with on-tool local exhaust ventilation, International Union of Bricklayers and Allied Craftworkers Southern Ohio-Kentucky Regional Training Center, Batavia, Ohio ⬇️

In-depth survey report: removing mortar with a powered chisel with on-tool local exhaust ventilation and a higher-flow vacuum cleaner, International Union of Bricklayers and Allied Craftworkers Southern Ohio-Kentucky Regional Training Center, ... ⬇️

In-depth survey report: removing mortar with a powered chisel with on-tool local exhaust ventilation, International Union of Bricklayers and Allied Craftworkers Southern Ohio-Kentucky Regional Training Center, Batavia, Ohio ⬇️

In-depth survey report: removing mortar with a powered chisel, International Union of Bricklayers and Allied Craftworkers Southern Ohio-Kentucky Regional Training Center, Batavia, Ohio ⬇️

In-depth survey report: removing mortar with a powered mortar-raking chisel with on-tool local exhaust ventilation, International Union of Bricklayers and Allied Craftworkers Southern Ohio-Kentucky Regional Training Center, Batavia, Ohio ⬇️

In-depth survey report: removing mortar with a powered saw and modified on-tool hood, International Union of Bricklayers and Allied Craftworkers Southern Ohio-Kentucky Regional Training Center, Batavia, Ohio ⬇️

In-depth survey report: removing mortar with a powered saw, International Union of Bricklayers and Allied Craftworkers Southern Ohio-Kentucky Regional Training Center, Batavia, Ohio ⬇️

Inhalation exposure of acrylonitrile butadiene styrene filament 3D printer emissions induces pulmonary and systemic toxicity in rats ⬇️

Investigation of ventilation engineering controls for stone countertop fabrication ⬇️

Miniature differential mobility analyzer for compact field-portable spectrometers

Miniature dual-corona ionizer for bipolar charging of aerosol

Mouse pulmonary response induced by exposure to dust from sawing corian, a solid-surface composite material ⬇️

Mouse pulmonary response to dust from sawing Corian, a solid-surface composite material

On the characterization of the generation rate and size-dependent crystalline silica content of the dust from cutting fiber cement siding

Physical chemical properties and cell toxicity of sanding copper-treated lumber

Physicochemical characterization and in vitro toxicity of emissions from a 3D printer ⬇️

Pulmonary and systemic toxicity in rats following inhalation exposure of 3-D printer emissions from acrylonitrile butadiene styrene (ABS) filament

Pulmonary exposure to dusts from grinding stone countertop products induces lung inflammation and fibrosis ⬇️

Reducing hazardous dust exposure when cutting fiber-cement siding ⬇️

Release of crystalline silica nanoparticles during engineered stone fabrication

Revealing the structural and chemical properties of copper-based nanoparticles released from copper treated wood

The composition of emissions from sanding Corian® with different sandpapers

The composition of emissions from sawing Corian®, a solid surface composite material

The generation rate of respirable dust from cutting fiber cement siding using different tools

Three dimensional (3D) printer emission-induced cell toxicity ⬇️

Three-dimensional printing with nano-enabled filaments releases polymer particles containing carbon nanotubes into air

Toxicological assessment of dust from sanding micronized copper-treated lumber in vivo

Toxicological evaluation of acrylonitrile butadiene styrene (ABS) 3D printer emissions ⬇️

Unipolar charging based, hand-held mobility spectrometer for aerosol size distribution measurement