2D Printing of Piezoresistive Auxetic Silicone Sensor Structures

3D Printable Soft Sensory Fiber Networks for Robust and Complex Tactile Sensing

3D-Printing Nanocellulose-Poly(3-hydroxybutyrate- co -3-hydroxyhexanoate) Biodegradable Composites by Fused Deposition Modeling

A Monolithic Perovskite Structure for Use as a Magnetic Regenerator

A Sensorized Soft Pneumatic Actuator Fabricated with Extrusion-Based Additive Manufacturing

A Soft Pneumatic Actuator with Integrated Deformation Sensing Elements Produced Exclusively with Extrusion Based Additive Manufacturing

A case study of the effect of grain size on the oxygen permeation flux of BSCF disk-shaped membrane fabricated by thermoplastic processing

A new measurement method of piezoelectric properties of single ceramic fibres

A review on self-healing polymers for soft robotics

Adhesion and Stiffness Matching in Epoxy-Vitrimers/Strain Sensor Fiber Laminates

Analysis of Styrene-Butadiene Based Thermoplastic Magnetorheological Elastomers with Surface-Treated Iron Particles

Anodized TiO2 Nanotubes: Effect of anodizing time on film length, morphology and photoelectrochemical properties

Antistatic Fibers for High-Visibility Workwear: Challenges of Melt-Spinning Industrial Fibers

artículo científico publicado en 2020

Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) feedstock development and optimization for thermoplastic forming of thin planar and tubular oxygen separation membranes

BaTiO3 nanotubes by co-axial electrospinning: Rheological and microstructural investigations

Barium titanate-based PTCR thermistor fibers: Processing and properties

CO2-Reduktion bei Gasturbinen-Prozessen

Case study of a rapid prototyping method for optimizing soft gripper structures with integrated piezoresistive sensors

Ceramic core–shell composites with modified mechanical properties prepared by thermoplastic co-extrusion

Characterization and estimation of dielectric constant of electrospun BaTiO3 nanofibers at different calcination temperatures using theoretical models

Charged-cellulose nanofibrils as a nutrient carrier in biodegradable polymers for enhanced efficiency fertilizers

Comparison methods for microstructure analysis on highly porous extrudates based on diatomite filter aids

Comparison of photoelectrochemical properties of TiO 2 Nanotubes and sol-gel

Comparison of piezoresistive monofilament polymer sensors

artículo científico publicado en 2014

Computing Fibers: A Novel Fiber for Intelligent Fabrics?

Conformal Cu Coating on Electrospun Nanofibers for 3D Electro‐Conductive Networks

Debinding mechanisms in thermoplastic processing of a Ba(0.5)Sr(0.5)Co(0.8)Fe(0.2)O(3-δ)- stearic acid-polystyrene mixture.

artículo científico publicado en 2012

Development of copper impregnated porous granulates for chemical-looping combustion

Development of granular materials for fluidized bed process: measuring attrition resistance with a horizontal ball milling device and its mathematical description

Development of oxygen carriers for Chemical Looping Combustion: The chemical interaction between CuO and silica/γ-alumina granules with similar microstructure

Development of oxygen carriers for chemical looping combustion: effects of support microstructure on the performance of oxygen carriers

article

Dielectric relaxation of Bi 4 Ti 3 O 12 ceramics prepared by the low-temperature combustion synthesis

Dispersion of lanthanoid-coated barium titanate in a paraffin-based extrusion binder system

scholarly article by Markus Wegmann et al published January 2006 in Ceramics International

Draw-spun, photonically annealed Ag fibers as alternative electrodes for flexible CIGS solar cells

scientific article published on 30 November 2018

EVA-PVA binder system for polymer derived mullite made by material extrusion based additive manufacturing

Effect of Aging Time and Film Thickness on the Photoelectrochemical Properties of TiO2Sol-Gel Photoanodes

Effect of MgO sintering additive on mullite structures manufactured by fused deposition modeling (FDM) technology

Effect of Polymer-Ceramic Fibre Interphase Design on Coupling Factor in Low Fibre Volume Content Piezoelectric Composites

Effect of SiO2 on sintering and dielectric properties of CaCu3Ti4O12 nanofibers

Effect of sintering temperature on microstructural evolution of M48 high speed tool steel bonded NbC matrix cemented carbides sintered in inert atmosphere

Effect of stearic acid on rheological properties and printability of ethylene vinyl acetate based feedstocks for fused filament fabrication of alumina

Effect of the Elastomer Matrix on Thermoplastic Elastomer-Based Strain Sensor Fiber Composites

scientific article published on 23 April 2020

Effect of using different precursors on electrospinning of CaCu3Ti4O12

Effects of different thermoplastic binders on the processability of feedstocks for ceramic co-extrusion process

artículo científico publicado en 2011

Effects of rheology on the interface of Pb(Zr, Ti)O3 monofilament composites obtained by co-extrusion

artículo científico publicado en 2009

Elastomer actuators: systematic improvement in properties by use of composite materials

Electronically Functional Fibre Technology Development for Ambient Intelligence

Electrospinning and characterisation of ceria doped yttria fibres

journal article; published in Advances in Applied Ceramics in 2010

Electrospinning of ZrO2 fibers without sol-gel methods: Effect of inorganic Zr-source on electrospinning properties and phase composition

Electrospun TiO(2) fiber composite photoelectrodes for water splitting.

artículo científico publicado en 2013

Enhancing dielectric properties of barium titanate macrofibers

Ethanolamine-assisted low-temperature crystallization of hydroxide nanoparticle ink into transparent and conductive ITO layers

Ethylene vinyl acetate as a binder for additive manufacturing of tricalcium phosphate bio-ceramics

FDM Keramikdruck: Herstellung von keramischen Strukturen mit Hilfe von kommerziellen Filamentdruckern

Fabrication and performance of a tubular ceria based oxygen transport membrane on a low cost MgO support

Fabrication of a Soft Robotic Gripper With Integrated Strain Sensing Elements Using Multi-Material Additive Manufacturing

artículo científico publicado en 2021

Facile Synthesis by Peroxide Method and Microwave-Assisted Hydrothermal Treatment of TiO 2 with High Photocatalytic Efficiency for Dye Degradation and Hydrogen Production

Ferroelectric Characterization of Single PZT Fibers

artículo científico publicado en 2008

Ferroelectric KNNT Fibers by Thermoplastic Extrusion Process: Microstructure and Electromechanical Characterization

Ferroelectric hybrid fibers to develop flexible sensors for shape sensing of smart textiles and soft condensed matter bodies

Filament extrusion-based additive manufacturing of 316L stainless steel: Effects of sintering conditions on the microstructure and mechanical properties

Filament extrusion-based additive manufacturing of NiTi shape memory alloys

Flexible ceramic-reinforced polyurethane composite coatings on synthetic fibres: Process of continuous liquid film coating and its influence on the coating thickness

Fused deposition modeling of mullite structures from a preceramic polymer and γ-alumina

Fused filament fabrication of stainless steel structures - from binder development to sintered properties

Granulation processing parameters on the mechanical properties of diatomite-based porous granulates

High Strain in (K,Na)NbO 3 -Based Lead-Free Piezoelectric Fibers

Impact of the Anodizing Potential on the Electron Transport Properties of Nb-doped TiO2 Nanotubes

Improved γ-alumina support based pseudo-boehmite shaped by micro-extrusion process for oxygen carrier support application

Influence of Varying the Powder Loading Content on the Homogeneity and Properties of Extruded PZT-Fibers

Influence of carbon content and processing treatment of metallic binder on the outgassing and sintering of NbC based cemented carbide

Influence of porous substrate on copper based oxygen carrier efficiency for chemical-looping combustion

Inkjet‐Printed Conductive ITO Patterns for Transparent Security Systems

Investigation of Electromechanical Properties on 3-D Printed Piezoelectric Composite Scaffold Structures

Investigation of Sintering Temperature on Attrition Resistance of Highly Porous Diatomite Based Material

Investigation of clay content and sintering temperature on attrition resistance of highly porous diatomite based material

Investigation of dielectric properties and microstructure of sintered 13·2Li 2 O − 67·6SiO 2 − 14.49Al 2 O 3 − 3·3TiO 2 − 0.4BaO − 0.97ZnO glass-ceramics

Kinetic analysis of the polymer burnout in ceramic thermoplastic processing of the YSZ thin electrolyte structures using model free method

Kinetics and equilibrium of Eco-debinding of PZT ceramics shaped by thermoplastic extrusion

Kinetics of crystallization in 13.2Li2O-67.6SiO2-14.49Al2O3-3.3TiO2-0.4BaO-0.97ZnO glass ceramic powder: Part I: A model-free vs. model-fitting approach

Light-intensity-induced characterization of elastic constants and d33 piezoelectric coefficient of PLZT single fiber based transducers

artículo científico publicado en 2013

Low Energy Consumption Synthesis of Nanostructured TiO2Particles by Combining Oxidant Peroxide Method and Microwave-Assisted Hydrothermal Treatment

Low cost porous MgO substrates for oxygen transport membranes

Low shear compounding process for thermoplastic fabrication of ferroelectric lead-free fibres

Magneto-Active Elastomer Filter for Tactile Sensing Augmentation Through Online Adaptive Stiffening

Magnetoactive Polymer Composite Fibers and Fabrics -Processing and Mechanical Characterization

Manufacturing and characterization of Magnéli phase conductive fibres

Manufacturing complex Al 2 O 3 ceramic structures using consumer-grade fused deposition modelling printers

Manufacturing of Tubular Dead-End Membranes by Continuous Thermoplastic Extrusion

Material extrusion additive manufacturing of advanced ceramics: Towards the production of large components

Material extrusion additive manufacturing of zirconia parts using powder injection molding feedstock compositions

Material extrusion based additive manufacturing of large zirconia structures using filaments with ethylene vinyl acetate based binder composition

Mechanical and electromechanical properties of piezoelectric ceramic fibers drawn by the alginate gelation method

Mechanical characterisation of mullite-based ceramic matrix composites at test temperatures up to 1200°C

Mechanical examination of PZT microfibre defects structure

Mechanical properties of zirconia core-shell rods with porous core and dense shell prepared by thermoplastic co-extrusion

Mechanistic studies of chemical looping desulfurization of Mn-based oxides using in situ X-ray absorption spectroscopy

Microstructural Analysis and Mechanical Properties of Pb(Zr,Ti)O3 Fibers Derived by Different Processing Routes

Microstructural and electromechanical comparison of different piezoelectric PZT based single fibers and their 1–3 composites

Motion pattern discrimination for soft robots with morphologically flexible sensors

Nanoparticle prepared mechanically stable hierarchically porous silica granulates and their application as oxygen carrier supports for chemical looping combustion

Novel Characterization Procedure for Single Piezoelectric Fibers

artículo científico publicado en 2008

PLZT Microfibers Technology Optimization

PLZT microfibers volume gradients and anisotropy

PZT Microfibre defect structure studied by Raman spectroscopy

Pellet-based fused deposition modeling for the development of soft compliant robotic grippers with integrated sensing elements

Photocatalytic activity of titania fibers obtained by electrospinning

artículo científico publicado en 2009

Photoelectrochemical study of anodized TiO2 Nanotubes prepared using low and high H2O contents

Piezoresistive Carbon-based Hybrid Sensor for Body-Mounted Biomedical Applications

Piezoresistive Elastomer-Based Composite Strain Sensors and Their Applications

Piezoresistive Soft Condensed Matter Sensor for Body-Mounted Vital Function Applications

artículo científico publicado en 2016

Piezoresistive carbon-based composites for sensor applications: Effects of polarity and non-rubber components on shape recovery

Piezoresistive sensor fiber composites based on silicone elastomers for the monitoring of the position of a robot arm

Planar and tubular perovskite-type membrane reactors for the partial oxidation of methane to syngas

Pore analyses of highly porous diatomite and clay based materials for fluidized bed reactors

Preparation and characterization of potassium sodium niobate nanofibers by electrospinning

Preparation of Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) feedstocks with different thermoplastic binders and their use in the production of thin tubular membranes by extrusion

Processing and Properties of Co-Extruded Lead Zirconate Titanate Fibers

artículo científico publicado en 2011

Processing and electromechanical properties of lanthanum-doped Pb(Zr,Ti)O3 extruded piezoelectric fibres

Processing of Self‐Healing Polymers for Soft Robotics

Processing, microstructure and electromechanical properties of Pb(Zr, Ti)O 3 fibers obtained by thermoplastic co-extrusion

artículo científico publicado en 2009

Production and properties of substituted LaFeO3-perovskite tubular membranes for partial oxidation of methane to syngas

Properties of Pb(Zr,Ti)O3 fibres with a radial gradient structure

Re-oxidation mechanism and kinetics of fine scale Ti-Magnéli phases in fibre form using thermo-gravimetric analysis

Recognizing Upper Body Postures using Textile Strain Sensors

Rhombohedral PLZT piezoelectric microfibers: a combined Raman and X-ray diffraction study

SVAS3: Strain Vector Aided Sensorization of Soft Structures.

artículo científico publicado en 2014

Sensor for Measuring Strain in Textile

artículo científico publicado en 2008

Sensorized Robotic Skin Based on Piezoresistive Sensor Fiber Composites Produced with Injection Molding of Liquid Silicone

Silicon carbide fiber-shaped microtools by extrusion and sintering SiC with and without carbon powder sintering additive

Sintering behavior of NbC based cemented carbides bonded with M2 high speed steel

Small and large signal ferroelectric properties of single lead zirconium titanate fibers

Soft self-healing resistive-based sensors inspired by sensory transduction in biological systems

Stretchable piezoelectric elastic composites for sensors and energy generators

Sub-stoichiometric functionally graded titania fibres for water-splitting applications

Suppressing Deep Traps in Self-Organized TiO 2 Nanotubes by Nb Doping and Optimized Water Content

Supramolecular Self-Healing Sensor Fiber Composites for Damage Detection in Piezoresistive Electronic Skin for Soft Robots

Synthesis of CaCu3Ti4O12 nanofibers by electrospinning

Synthesis of CeO2and Y2O3-Doped CeO2Composite Fibers by Electrospinning

artículo científico publicado en 2009

Synthesis of hydroxyapatite fibers using electrospinning: A study of phase evolution based on polymer matrix

Tailoring the microstructure of porous MgO supports for asymmetric oxygen separation membranes: Optimization of thermoplastic feedstock systems

Technologies for gas turbine power generation with CO2 mitigation

Technology of PLZT ceramics microfibers for multiferroics composites

Textile Pressure Sensor Made of Flexible Plastic Optical Fibers

artículo científico publicado en 2008

The impact of microstructure in (K,Na)NbO3-based lead-Free piezoelectric fibers: From processing to device production for structural health monitoring

The role of sacrificial fugitives in thermoplastic extrusion feedstocks on properties of MgO supports for oxygen transport membranes

Thermoplastic Extrusion to Highly-Loaded Thin Green Fibres Containing Pb(Zr,Ti)O3

Thermoplastic elastomer composite filaments for strain sensing applications extruded with a fused deposition modelling 3D printer

Thermoplastic processing and debinding behavior of NbC-M2 high speed steel cemented carbide

Uniaxial extrusion as an enhancement method of piezoelectric properties of ceramic micro fibers

Use of modified deep eutectic solvent as an additional chemical in a flexible conductive natural rubber sensor for motion analysis

Using Redundant and Disjoint Time-Variant Soft Robotic Sensors for Accurate Static State Estimation