A Model for the Influence of Micro-Alloying Elements on Static Recrystallization of Austenite

A Statistical Methodology to Reconstruct Nucleation Pathways in the Fe-Cu System

A model for static recrystallization with simultaneous precipitation and solute drag ⬇️

Scientific article

A semi-physical α-β model on bainite transformation kinetics and carbon partitioning

A state parameter-based model for static recrystallization interacting with precipitation

A thermokinetic model for Mg–Si couple formation in Al–Mg–Si alloys

Advanced Thermo-mechanical Process for Homogenous Hierarchical Microstructures in HSLA Steels

Agile Multiscale Modelling of the Thermo-Mechanical Processing of an Aluminium Alloy

AlN Precipitation During Isothermal Annealing of Ultra Low Carbon Steel

An efficient method to reconstruct free energy profiles for diffusive processes in transition interface sampling and forward flux sampling simulations

scientific article published on 01 March 2019

Analysis of Clustering Characteristics during early Stages of Cu Precipitation in bcc-Fe

Analysis of Recrystallization Kinetics Concerning the Experimental, Computational, and Empirical Evaluation of Critical Temperatures for Static Recrystallization in Nb, Ti, and V Microalloyed Steels

Analysis of Sn-Bi Solders: X-ray Micro Computed Tomography Imaging and Microstructure Characterization in Relation to Properties and Liquid Phase Healing Potential

artículo científico publicado en 2020

Analysis of the Mechanical Properties of N-Added CMn Structural Steel by the Impulse Internal Friction Technique

Analysis of the Temperature and Strain-Rate Dependences of Strain Hardening

Assessment of microstructural characterization and Thermo-Kinetic simulations for producing strengthened and toughened martensitic steels

Atomistic and continuums modeling of cluster migration and coagulation in precipitation reactions

artículo científico publicado en 2012

Bridging the Gap between <i>Ab Initio</i> and Large Scale Studies - A Monte Carlo Study of Cu Precipitation in Fe

CALPHAD modeling of metastable phases in the Al–Mg–Si system

CALPHAD-based alloy design for advanced automotive steels – Part II: Compositional and microstructural modification for advanced carburizing steels

artículo científico publicado en 2016

Carbide Precipitation in 2.25 Cr-1 Mo Bainitic Steel: Effect of Heating and Isothermal Tempering Conditions

Carbo-Nitride Precipitation in Tempered Martensite - Computer Simulation and Experiment

Characterisation of a High-Performance Al-Zn-Mg-Cu Alloy Designed for Wire Arc Additive Manufacturing

scientific article published on 01 April 2020

Characterisation of secondary phases in Ni-base superalloy Rene 65

Co-Precipitation Behavior of MnS and AlN in a Low-Carbon Steel

Cold Roll Cladding of Carbon Steels

Computational analysis of austenite film thickness and C-redistribution in carbide-free bainite

Computational and Experimental Analysis of Carbo-Nitride Precipitation in Tempered Martensite

Coupled Grain Growth and Precipitation Modeling in Multi-Phase Systems

Couples and pairs formation—thermodynamic and kinetic modelling applied to Al–Mg–Si

Coupling of Computational Thermodynamics with Kinetic Models for Predictive Simulations of Materials Properties

Crystal structure and free energy of Ti 2 Ni 3 precipitates in Ti–Ni alloys from first principles

Cu-bearing, martensitic stainless steels for applications in biological environments

Determination of Substitutional-Interstitial Interaction from Chemical Potentials of Interstitials in the Steel Matrix

Determination of depths of multiple traps for interstitials and their influence on diffusion kinetics

Determination of depths of traps for interstitials from thermodynamic data: a new view on carbon trapping and diffusion

Development of high-strength welding consumables using calculations and microstructural characterisation

Diffusion processes in a migrating interface: The thick-interface model

Dissolution of hardening phases during deformation in an A6061 Aluminium alloy

Early Stages of Cu Precipitation in 15-5 PH Maraging Steel Revisited − Part I: Experimental Analysis

Early Stages of Cu Precipitation in 15-5 PH Maraging Steel Revisited - Part II: Thermokinetic Simulation

Effect of solder joint size and composition on liquid-assisted healing

Evolution of Precipitates and Martensite Substructure During Continuous Heat Treatment

Experimental characterisation and modelling of deformation- induced microstructure in an A6061 aluminium alloy

Flow Stress Modelling and Microstructure Development during Deformation of Metallic Materials

Generalization of classical Hillert's grain growth and LSW theories to a wide family of kinetic evolution equations and stationary distribution functions

artículo científico publicado en 2022

Healing solders: A numerical investigation of damage-healing experiments

Impact of Surface Structure Control Cooling During Continuous Casting on Hot Ductility of Microalloyed Steel

Influence of Deformation on Phase Transformation and Precipitation of Steels for Oil Country Tubular Goods

Influence of Deformation on the Precipitation Behavior of Nb(CN) in Austenite and Ferrite

Influence of NbC-Precipitation on Hot Ductility in Microalloyed Steel - TEM Study and Thermokinetic Modeling

Influence of alloying elements on the mechanical properties of high-strength weld metal

Influence of misfit stress relaxation by power-law creep and plasticity on kinetics of coarsening of precipitates

Integrated Physical-Constitutive Computational Framework for Plastic Deformation Modeling

Interstitial diffusion in systems with multiple sorts of traps

Investigation of Austenite-to-Ferrite Transformation in Ultralow and Low-Carbon Steel Using High-Speed Quenching Dilatometry and Thermokinetic Simulation

Investigation of the Formability of Cryogenic Rolled AA6061 and Its Improvement Using Artificial Aging Treatment

Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model

Kinetics Simulation of MnS Precipitation in Electrical Steel

Lap shear test for solder materials: Local stress states and their effect on deformation and damage

Loading and Healing method to study liquid-assisted healing properties of cyclic failed bulk solder

Local approach for coarsening of precipitates

Long-range diffusion of H in the presence of traps in a microalloyed steel

Loss of Ductility Caused by AlN Precipitation in Hadfield Steel

Making sustainable aluminum by recycling scrap: The science of “dirty” alloys

Mechanism of surface modification using machine hammer peening technology

Micromechanics-based damage model for liquid-assisted healing

Microstructural Evolution and Mechanical Properties of Fusion Welds in an Iron-Copper-Based Multicomponent Steel

Microstructural investigation of thermally aged nickel-based superalloy 718Plus

Microstructures formation and phase transformations around the interface of welds between dissimilar steels

Modeling Particle Distances of Coherent Prolate- and Oblate-Shaped Precipitates in bcc Systems

Modeling Static Recrystallization in Al-Mg Alloys

Modeling of Bake Hardening Kinetics and Carbon Redistribution in Dual‐Phase Steels

Modeling of precipitation strengthening in Inconel 718 including non-spherical γ ″ precipitates

Modelling Yield Strength in an A6061 Aluminium Alloy

Modelling hydrogen migration and trapping in steels

Modelling the dynamic recrystallization in C–Mn micro-alloyed steel during thermo-mechanical treatment using cellular automata

Monte Carlo study of Cu precipitation in bcc-Fe: temperature-dependent cluster expansion versus local chemical environment potentials

Numerical simulation of NbC precipitation in microalloyed steel

Numerical simulation of the evolution of primary and secondary Nb(CN), Ti(CN) and AlN in Nb-microalloyed steel during continuous casting

Numerical study on local effects of composition and geometry in self-healing solders

Particle strengthening in fcc crystals with prolate and oblate precipitates

Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques

Precipitate growth in multi-component systems with stress relaxation by diffusion and creep

Precipitate strengthening of non-spherical precipitates extended in 〈100〉 or {100} direction in fcc crystals

Precipitation Behavior of Strain-Induced V Precipitates in Ferrite at Different Temperatures in a 0.2 wt% Carbon Steel

Precipitation Kinetic Modeling of the New Eta-Phase Ni 6 AlNb in Ni-Base Superalloys

Precipitation in Al-Alloy 6016 – The Role of Excess Vacancies

Prediction of precipitate evolution and martensite transformation in Ti-Ni-Cu shape memory alloys by computational thermodynamics

Process-controlled suppression of natural aging in an Al–Mg–Si alloy

artículo científico publicado en 2014

Quantitative analysis of void initiation in thermo-mechanical fatigue of polycrystalline copper films

Relevance of Hot Ductility Tests to Crack Sensitivity during Continuous Casting of Steel

Reverse α′→γ transformation mechanisms of martensitic Fe–Mn and age-hardenable Fe–Mn–Pd alloys upon fast and slow continuous heating

artículo científico publicado en 2014

Revised thermodynamic description of the Fe-Cr system based on an improved sublattice model of the σ phase

artículo científico publicado en 2017

Rigid-lattice Monte Carlo study of nucleation kinetics in dilute bcc Fe-Cu alloys using statistical sampling techniques

Role of vacancies in work hardening and fatigue of TiAl alloys

Saturation of Deformation Twinning in Magnesium Alloys

Self-Diffusion in Grain Boundaries and Dislocation Pipes in Al, Fe, and Ni and Application to AlN Precipitation in Steel

Simulation and experimental characterization of microporosity during solidification in Sn-Bi alloys

Simulation of Carbo‐Nitride Precipitation in the Multi‐Phase Microstructure of Micro‐Alloyed Transformation‐Induced Plasticity Steel

Simulation of Cu Precipitation in the Fe-Cu Binary System

Simulation of Dynamic and Meta-Dynamic Recrystallization Behavior of Forged Alloy 718 Parts Using a Multi-Class Grain Size Model

artículo científico publicado en 2020

Simulation of Precipitation Kinetics and Precipitation Strengthening of B2-precipitates in Martensitic PH 13–8 Mo Steel

Simulation of Yield Strength in Allvac<sup>®</sup> 718Plus<sup>TM</sup>

Simulation of precipitate evolution in Fe–25 Co– 15 Mo with Si addition based on computational thermodynamics

Simulation of the effect of composition on the precipitation in 6xxx Al alloys during continuous-heating DSC

Simultaneous Precipitation and Recrystallization during Hot Deformation of Ti, Nb and V Microalloyed Steel

State Parameter-Based Simulation of Temperature- and Strain Rate Dependent Flow Curves of Al-Alloys

State Parameter-Based Yield Strength Model for Integration in Finite Element User-Material Routines

artículo científico publicado en 2022

State parameter-based constitutive modelling of stress strain curves in Al-Mg solid solutions

State parameter-based modelling of microstructure evolution in micro-alloyed steel during hot forming

Static Strain Aging in Fe-Mn-N Alloys Investigated by Impulse Excitation Internal Friction Analysis

Strain aging characterization and physical modelling of over-aging in dual phase steel

Strain energy contributions on the bainitic phase transformation in a CrMoV steel during continuous cooling

Stress relaxation by power-law creep during growth of a misfitting precipitate

Structure and Migration Mechanisms of Small Vacancy Clusters in Cu: A Combined EAM and DFT Study

Structure and Migration Mechanisms of Small Vacancy Clusters in Cu: A Combined EAM and DFT Study

Study of molten metal droplet adhesion to organic anti-spatter coatings

Temperature-dependent strain hardening, precipitation and deformation-induced microstructure evolution in AA 6061

The Cr-Nb-Si system: Improved thermodynamic modelling and its use in simulation of Laves phase in steel

artículo científico publicado en 2016

The Life-Time of Structural Vacancies in the Presence of Solute Trapping

The microstructure of heat-treated nickel-based superalloy 718Plus

Thermal Desorption Spectra of H in an Fe–C–Nb Alloy Evaluated by Diffusion Simulation

Thermo-Kinetic Simulation of the Yield Strength Evolution of AA7075 during Natural Aging

Thermo-kinetic prediction of metastable and stable phase precipitation in Al–Zn–Mg series aluminium alloys during non-isothermal DSC analysis

Thermodynamic Modelling and Microstructural Study of Z-Phase Formation in a Ta-Alloyed Martensitic Steel

Thermodynamic modelling of irreversible processes

Thermodynamics of Pd–Mn phases and extension to the Fe–Mn–Pd system

artículo científico publicado en 2015

Thermodynamics of Ti–Ni shape memory alloys

Thermodynamics-Integrated Simulation of Precipitate Evolution in Al-Mg-Si-Alloys

Thermokinetic Simulation of Precipitation in NiTi Shape Memory Alloys

Two-Step Quenching & Partitioning of 42SiCrB Steel

Ultrafast artificial aging of Al–Mg–Si alloys

artículo científico publicado en 2016

Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation