Filtros de búsqueda

Lista de obras de

A Calibration-Free, Noncontact, Disposable Liquid Dispensing Cartridge Featuring an Online Process Control

artículo científico publicado en 2013

A Combination of X-Ray Tomography and Carbon Binder Modeling: Reconstructing the Three Phases of LiCoO2Li-Ion Battery Cathodes

article

A Smartphone-Based Colorimetric Reader for Human C-Reactive Protein Immunoassay

artículo científico publicado en 2017

A completely spray-coated membrane electrode assembly

article

A fully spray-coated fuel cell membrane electrode assembly using Aquivion ionomer with a graphene oxide/cerium oxide interlayer

A highly parallel nanoliter dispenser for microarray fabrication

artículo científico publicado en 2004

A modular diffusion barrier based on phase separation for localized delivery of discrete drug volumes in aqueous environments

artículo científico publicado en 2009

A smartphone-based colorimetric reader for bioanalytical applications using the screen-based bottom illumination provided by gadgets

artículo científico publicado en 2014

A versatile-deployable bacterial detection system for food and environmental safety based on LabTube-automated DNA purification, LabReader-integrated amplification, readout and analysis.

artículo científico publicado en 2014

Active Continuous-Flow Micromixer Using an External Braille Pin Actuator Array

Aggregation of bead-monolayers in flat microfluidic chambers - simulation by the model of porous media

artículo científico publicado en 2004

Alginate bead fabrication and encapsulation of living cells under centrifugally induced artificial gravity conditions

scientific article published on 01 June 2008

An air-breathing enzymatic cathode with extended lifetime by continuous laccase supply

artículo científico publicado en 2018

Analysis of fast protein phosphorylation kinetics in single cells on a microfluidic chip

artículo científico publicado en 2015

Assessment of hydrogels for bioprinting of endothelial cells

artículo científico publicado en 2017

Automated Forensic Animal Family Identification by Nested PCR and Melt Curve Analysis on an Off-the-Shelf Thermocycler Augmented with a Centrifugal Microfluidic Disk Segment

artículo científico publicado en 2015

Automated Pre-Analytic Processing of Whole Saliva Using Magnet-Beating for Point-of-Care Protein Biomarker Analysis

scientific article published on 30 November 2019

Automated serial dilutions for high-dynamic-range assays enabled by fill-level-coupled valving in centrifugal microfluidics

scientific article published on 01 June 2019

Automation of amplicon-based library preparation for next generation sequencing by centrifugal microfluidics

artículo científico publicado en 2020

Bioprinting of high cell-density constructs leads to controlled lumen formation with self-assembly of endothelial cells

artículo científico publicado en 2019

Carbon electrodes for direct electron transfer type laccase cathodes investigated by current density-cathode potential behavior

artículo científico publicado en 2010

Centrifugal LabTube platform for fully automated DNA purification and LAMP amplification based on an integrated, low-cost heating system.

artículo científico publicado en 2014

Centrifugal Step Emulsification: How Buoyancy Enables High Generation Rates of Monodisperse Droplets

artículo científico publicado en 2019

Centrifugal extraction of plasma from whole blood on a rotating disk

artículo científico publicado en 2006

Centrifugal gas-phase transition magnetophoresis (GTM)--a generic method for automation of magnetic bead based assays on the centrifugal microfluidic platform and application to DNA purification

artículo científico publicado en 2012

Centrifugal microfluidic system for primary amplification and secondary real-time PCR

artículo científico publicado el 11 de octubre de 2010

Centrifugal step emulsification applied for absolute quantification of nucleic acids by digital droplet RPA.

artículo científico publicado en 2015

Centrifugo-dynamic inward pumping of liquids on a centrifugal microfluidic platform

artículo científico publicado en 2012

Centrifugo-pneumatic valve for metering of highly wetting liquids on centrifugal microfluidic platforms

artículo científico publicado en 2009

Cerium Oxide Decorated Polymer Nanofibers as Effective Membrane Reinforcement for Durable, High-Performance Fuel Cells

scholarly article by Matthias Breitwieser et al published 2 December 2016 in Advanced Energy Materials

Chair/bedside diagnosis of oral and respiratory tract infections, and identification of antibiotic resistances for personalised monitoring and treatment

artículo científico publicado en 2016

Completely superhydrophobic PDMS surfaces for microfluidics

scientific article published on 21 May 2012

Construction of a Microstructured Collagen Membrane Mimicking the Papillary Dermis Architecture and Guiding Keratinocyte Morphology and Gene Expression

article

Continuous microfluidic DNA extraction using phase-transfer magnetophoresis

artículo científico publicado en 2010

Current methods for fluorescence-based universal sequence-dependent detection of nucleic acids in homogenous assays and clinical applications

artículo científico

Cyclic electrodeposition of PtCu alloy: facile fabrication of highly porous platinum electrodes.

artículo científico publicado en 2012

Cytocompatibility testing of hydrogels toward bioprinting of mesenchymal stem cells.

artículo científico publicado en 2017

Diagnostic tools for tackling febrile illness and enhancing patient management

scientific article published on 05 October 2018

Digital droplet PCR on disk.

artículo científico publicado en 2015

Direct deposition of proton exchange membranes enabling high performance hydrogen fuel cells

Direct three-dimensional reconstruction of a nanoporous catalyst layer for a polymer electrolyte fuel cell

article

Directly deposited Nafion/TiO2 composite membranes for high power medium temperature fuel cells

article

Electrochemical pesticide detection with AutoDip--a portable platform for automation of crude sample analyses

artículo científico publicado en 2015

Enhancing the quality of the tomography of nanoporous materials for better understanding of polymer electrolyte fuel cell materials

Fast and reliable protein microarray production by a new drop-in-drop technique

artículo científico publicado en 2005

Flow control for lateral flow strips with centrifugal microfluidics

scientific article published on 05 July 2019

Frequency-dependent transversal flow control in centrifugal microfluidics

artículo científico publicado en 2004

G-index: A new metric to describe dynamic refractive index effects in HPLC absorbance detection

artículo científico publicado en 2018

Graphene-based rapid and highly-sensitive immunoassay for C-reactive protein using a smartphone-based colorimetric reader

artículo científico publicado en 2014

Gravity-driven microfluidic assay for digital enumeration of bacteria and for antibiotic susceptibility testing

scientific article published on 27 November 2019

Highly flexible UV-vis radiation sources and novel detection schemes for spectrophotometric HPLC detection

scientific article published on 07 January 2014

Improved Pt-utilization efficiency of low Pt-loading PEM fuel cell electrodes using direct membrane deposition

article

In vivo evaluation of bioprinted pre-vascularized bone tissue

artículo científico publicado en 2020

Lab-on-a-Foil: microfluidics on thin and flexible films

artículo científico publicado en 2010

LabDisk for SAXS: a centrifugal microfluidic sample preparation platform for small-angle X-ray scattering.

artículo científico publicado en 2016

Large scale production and controlled deposition of single HUVEC spheroids for bioprinting applications

artículo científico publicado en 2017

Manufacture of chitosan microbeads using centrifugally driven flow of gel-forming solutions through a polymeric micronozzle.

artículo científico publicado en 2009

Mediator probe PCR: a novel approach for detection of real-time PCR based on label-free primary probes and standardized secondary universal fluorogenic reporters.

artículo científico publicado en 2012

Mediator probe PCR: detection of real-time PCR by label-free probes and a universal fluorogenic reporter

artículo científico publicado en 2014

Microfluidic Apps for off-the-shelf instruments

artículo científico publicado en 2012

Microfluidic Proximity Ligation Assay for Profiling Signaling Networks with Single-Cell Resolution

artículo científico publicado en 2015

Microfluidic lab-on-a-chip platforms: requirements, characteristics and applications

artículo científico publicado en 2010

Microfluidic lab-on-a-foil for nucleic acid analysis based on isothermal recombinase polymerase amplification (RPA).

artículo científico publicado en 2010

Microfluidic platforms for lab-on-a-chip applications

artículo científico publicado en 2007

Microfluidic solutions enabling continuous processing and monitoring of biological samples: A review

artículo científico publicado en 2016

Microstructuring of polymer films for sensitive genotyping by real-time PCR on a centrifugal microfluidic platform

artículo científico publicado en 2010

Miniature stick-packaging--an industrial technology for pre-storage and release of reagents in lab-on-a-chip systems

artículo científico publicado en 2013

Model fluids representing aqueous in-vitro diagnostic reagents for the development of dispensing systems

artículo científico publicado en 2013

Modification of micronozzle surfaces using fluorinated polymeric nanofilms for enhanced dispensing of polar and nonpolar fluids

artículo científico publicado en 2005

Molecular Genetic Characterization of Individual Cancer Cells Isolated via Single-Cell Printing

artículo científico publicado en 2016

Monochrome Multiplexing in Polymerase Chain Reaction by Photobleaching of Fluorogenic Hydrolysis Probes

artículo científico publicado en 2016

Morphological Evolution of Electrochemically Plated/Stripped Lithium Microstructures Investigated by Synchrotron X-ray Phase Contrast Tomography.

artículo científico publicado en 2016

Morphology of nanoporous carbon-binder domains in Li-ion batteries—A FIB-SEM study

article

Multi-Scale Correlative Tomography of a Li-Ion Battery Composite Cathode

artículo científico publicado en 2016

Multiscale tomography of nanoporous carbon-supported noble metal catalyst layers

Nano-morphology of a polymer electrolyte fuel cell catalyst layer—imaging, reconstruction and analysis

article

Non-contact production of oligonucleotide microarrays using the highly integrated TopSpot nanoliter dispenser

artículo científico publicado en 2004

On the importance of FIB-SEM specific segmentation algorithms for porous media

article

One-step kinetics-based immunoassay for the highly sensitive detection of C-reactive protein in less than 30 min

artículo científico publicado en 2014

Open microfluidic gel electrophoresis: Rapid and low cost separation and analysis of DNA at the nanoliter scale

artículo científico publicado en 2017

Optical non-contact localization of liquid-gas interfaces on disk during rotation for measuring flow rates and viscosities

artículo científico publicado en 2012

Overcoming bottlenecks of enzymatic biofuel cell cathodes: crude fungal culture supernatant can help to extend lifetime and reduce cost.

artículo científico publicado en 2013

Point-of-care testing system for digital single cell detection of MRSA directly from nasal swabs

scientific article published on 22 June 2020

Pre-storage of liquid reagents in glass ampoules for DNA extraction on a fully integrated lab-on-a-chip cartridge

artículo científico publicado en 2010

Quantification of artifacts in scanning electron microscopy tomography: Improving the reliability of calculated transport parameters in energy applications such as fuel cell and battery electrodes

Quantitative characterization of non-contact microdispensing technologies for the sub-microliter range

artículo científico publicado en 2012

Rapid Diagnosis of Respiratory Tract Infections Using a Point-of-Care Platform Incorporating a Clinical Decision Support Algorithm

artículo científico publicado en 2020

Rapid and highly sensitive luciferase reporter assay for the automated detection of botulinum toxin in the centrifugal microfluidic LabDisk platform

scholarly article in RSC Advances, vol. 3 no. 44, 2013

Rapid microarray processing using a disposable hybridization chamber with an integrated micropump

artículo científico publicado en 2012

Real-time stability testing of air-dried primers and fluorogenic hydrolysis probes stabilized by trehalose and xanthan.

artículo científico publicado en 2014

Relation between chromatographic resolution and signal-to-noise ratio in spectrophotometric HPLC detection.

artículo científico publicado en 2013

RespiDisk: a point-of-care platform for fully automated detection of respiratory tract infection pathogens in clinical samples

artículo científico publicado en 2020

Simple fabrication of 12 μm thin nanocomposite fuel cell membranes by direct electrospinning and printing

Simplified Real-Time Multiplex Detection of Loop-Mediated Isothermal Amplification Using Novel Mediator Displacement Probes with Universal Reporters.

artículo científico publicado en 2018

Simplified development of multiplex real-time PCR through master mix augmented by universal fluorogenic reporters

artículo científico publicado en 2016

Simultaneous use of a crossflow filtration membrane as microbial fuel cell anode - Permeate flow leads to 4-fold increased current densities.

artículo científico publicado en 2018

Single-cell dispensing and 'real-time' cell classification using convolutional neural networks for higher efficiency in single-cell cloning

scientific article published on 27 January 2020

Single-cell printer: automated, on demand, and label free

artículo científico publicado en 2013

Solid-phase PCR in a picowell array for immobilizing and arraying 100,000 PCR products to a microscope slide

artículo científico publicado en 2012

StarTube: a tube with reduced contact line for minimized gas bubble resistance

artículo científico publicado en 2008

Strategies for the fabrication of porous platinum electrodes

artículo científico publicado en 2011

Strategies to extend the lifetime of bioelectrochemical enzyme electrodes for biosensing and biofuel cell applications.

artículo científico publicado en 2010

Study of the Mechanisms of Internal Short Circuit in a Li/Li Cell by Synchrotron X-ray Phase Contrast Tomography

article

Synchrotron X-ray Tomographic Study of a Silicon Electrode Before and After Discharge and the Effect of Cavities on Particle Fracturing

Systematic screening of carbon-based anode materials for microbial fuel cells with Shewanella oneidensis MR-1.

artículo científico publicado en 2013

Tailoring the Membrane-Electrode Interface in PEM Fuel Cells: A Review and Perspective on Novel Engineering Approaches

Technologies for Single-Cell Isolation

artículo científico publicado en 2015

The LabDisk – A Fully Automated Centrifugal Lab-on-a-Chip System for the Detection of Biological Threats

article

The centrifugal microfluidic Bio-Disk platform

The reasons for the high power density of fuel cells fabricated with directly deposited membranes

article

Three-Dimensional Reconstruction of a LiCoO2 Li-Ion Battery Cathode

Three-Phase Multiscale Modeling of a LiCoO2Cathode: Combining the Advantages of FIB-SEM Imaging and X-Ray Tomography

article

TopSpot Vario: a novel microarrayer system for highly flexible and highly parallel picoliter dispensing

artículo científico publicado en 2009

Using planktonic microorganisms to supply the unpurified multi-copper oxidases laccase and copper efflux oxidases at a biofuel cell cathode

artículo científico publicado en 2014

Versatile Tool for Droplet Generation in Standard Reaction Tubes by Centrifugal Step Emulsification

scientific article published on 21 April 2020

Versatile sample environments and automation for biological solution X-ray scattering experiments at the P12 beamline (PETRA III, DESY)

artículo científico publicado en 2015